Free U.S Shipping over $100
or over $300 for international orders
exclusions apply*
Over 15 years in business
serving the yamaha community
Free Shipping / Easy Returns
within the contiguous U.S over $100
exclusions apply*
Largest supplier of xs parts
over 2000 parts in stock / ready to ship

Yamaha Motorcycle Brake Hoses and lines

Brake Hoses and lines

Aged brake lines can have cracks that let in air and leak fluid, both dangerous scenarios. Our Vintage Yamaha XS brake hoses match your Yamaha XS OEM brake lines, and bring aging brakes back to life. Our Vintage XS stainless steel brake lines offer improved performance over stock hoses, thanks to their resistance to bulging. We also carry Vintage Yamaha (XS650, XS400, XS360, RD and SR) banjo bolts (and washers), master cylinder reservoirs, brake switches and more.

View as List Grid

20 Items

per page
Set Descending Direction
  1. Washer - Banjo - Copper - Flat - 10.5 x 15 x 1.5 - Pkg 2
    Part #
    08-0258
    Banjo Bolt Washers - 10mm. ((Pk/2) Fits: All Brake hoses & Banjo Bolts. d1 (internal diameter) = 10.0mm d2 (external diameter) = 15mm S (thickness) = 1.5mm  
  2. Brake Line Kit - Braided Stainless Steel - 60 inch - TC Bros
    Part #
    19-0421
    Custom Stainless Braided Brakeline Kit TC Bros Choppers. 5 ft Brake line with two reusable 10 mm banjo fittings.Maxim operating pressure is 2500 PSI Easily cut to length to fit your application.Instruction included. 
    • Out of stock
  3. Brake Line - Braided Stainless Steel - 41 inch
    Part #
    29-6504
    DOT/TUV approved Stainless Steel Braided Brake Line One Piece Upper/Lower Hose (41" Long) Fits: 77-84 XS650's Measure! Ends rotate up to 1 full turn. 
  4. Banjo Bolt - Brake Light Switch - 10mm x 1.25
    Part #
    29-7002
    Brake Switch - Hydraulic Banjo Bolt Type . 10mm. x M1.25 with 24" Lead.Fits: All Hydraulic Brake systems on all 72-84 XS650's that use a single hose type banjo bolt. Brake switch bolt can be fitted anywhere from the master cylinder to the caliper and is actuated by hydraulic pressure. 
  5. Brake Line - Rubber - Lower Front - XS650
    Part #
    29-6522
    Brake Hose - Lower Front. Fits:1977-84 XS650's - Original Equipment rubber type - DOT Approved - Stock length 20" with 10 degree ends -  Made in Japan  
  6. Brake Line - Braided Stainless Steel - 24.5 inch
    Part #
    29-6508
    DOT/TUV approved Stainless Steel Braided Brake Line Fits: 78-80 XS650 Rear Disc Brake approximately 24.5" Long.Ends rotate up to 1 full turn. 
  7. Brake Line - Braided Stainless Steel - 20 inch
    Part #
    29-6507
    DOT/TUV approved Stainless Steel Braided Brake Line Fits: 77-84 XS650 Upper or Lower Front approximately 20" Long.Ends rotate up to 1 full turn. 
  8. Banjo Bolt - Master Cylinder - Brake Calipers - M10 x 1.25 - XS650
    Part #
    08-0257
    Banjo Bolt - M10. x 1.25 - Fits: All original XS650 and TX650 front & rear master cylinders and most Yamaha brake calipers. - OEM Ref.# 90401-10034 
  9. Banjo Bolt - Dual Hose - M10 x 1.25
    Part #
    29-7014
    Long Dual hose Banjo Bolt. M10. x 1.25 Not suitable for dual brake hose heads thicker than 8mm (Works with #29-6522, #29-6523, #29-6525 Only for dual) 
  10. Brake Line Joint - XS650 - TX650
    Part #
    29-7008
    Brake Hose Joint for Dual Disc Brakes. Original Yamaha type Joint with mounting hardware and Banjo Bolts(2).Lower banjo bolt is the long type for fitting the dual hoses to the calipers. Hose Sealing Washers also included.XS650, TX650 
  11. Brake Line - Steel - M10
    Part #
    29-7007
    Straight steel brake line with fittings. 6 13/16" long. Can be bent with proper equipment for use in various applications.Thread size M10 
  12. Brake Line - Steel - Lower - M10 - XS650C
    Part #
    29-7006
    Lower steel brake line. 6 3/8" Long. Needs to be bent to needed shape using proper equipment.Thread size M10 
  13. Brake Line - Rubber - Upper Front - XS650
    Part #
    29-6525
    Brake Hose - Upper Front stock type but with one end fitting rotated 180 degrees. Fits: 1978-84 XS650 "Specials" and 77-84 "Standards" with non stock high bars.Fits better to aftermarket master cylinders with hose mounted to reservoir front face rather than the stock position (reservoir end)D.O.T. Approved Original Eq... 
    • Out of stock
  14. Brake Line - Rubber - Rear - XS650 - 1978-1980
    Part #
    29-6524
    Brake Hose - Rear - Fits: Rear on XS650SE/SF/SG (1978-80) "Specials" - Original Equipment rubber type - DOT Approved - Length 24" with 20 degree fittings - Made in Japan 
  15. Brake Line - Rubber - Lower Front - XS650 European
    Part #
    29-6523
    Brake Hose - Lower Front. Fits: 1977-84 XS650's - Original Equipment rubber type - DOT Approved - Length 22" with 10 degree fittings - 2" longer than stock - Made in Japan  
  16. Brake Line - Rubber - Upper Front - XS650
    Part #
    29-6521
    Brake Hose - Upper Front.  Fits: 1977 Standard models and 1978-84 Specials (With non-stock lower bars). - Original rubber type with protective spring - DOT Approved - Length 17.5" with 20 degree ends -  Made in Japan  
  17. Brake Line - Rubber - Upper Front - XS650
    Part #
    29-6520
    Brake Hose - Upper Front. Fits:1978-84. XS650 "Specials" and 1977 Standards with non stock high bars - D.O.T. Approved - Original Equipment rubber type with protective spring - Length 20" with 20 degree fittings - Made in Japan. 
  18. Brake Line - Braided Stainless Steel - 17 inch
    Part #
    29-6505
    DOT/TUV approved Stainless Steel Braided Brake Line Fits: 1977-84 XS650 Standard models (low bar) Upper Front approximately 17" Long. Ends rotate up to 1 full turn. 
  19. Master Cylinder Reservoir - Rear - Includes 1/4 inch ID Hose
    Part #
    08-4011
    Master cylinder brake fluid reservoir with 1/4" id hose and hose clamps. For replacement or custom use. 
  20. Banjo Bolt - Brake Light Switch - 10mm x 1.00
    Part #
    29-7003
    Brake Switch - Hydraulic Banjo Bolt Type . 10mm. x M1.00 with 24" Lead.Fits: All Magura Master Cylinders, Our # 08-4000 rear master cylinder and many European and Suzuki brake systems (10mm. X M1.00 thread). Must use a single hose type banjo bolt. Brake switch bolt can be fitted anywhere from the master cylinder to the... 
View as List Grid

20 Items

per page
Set Descending Direction