Free U.S Shipping over $100
or over $300 for international orders
exclusions apply*
Over 15 years in business
serving the yamaha community
Free Shipping / Easy Returns
within the contiguous U.S over $100
exclusions apply*
Largest supplier of xs parts
over 2000 parts in stock / ready to ship

MotoGadget

View as List Grid

10 Items

per page
Set Descending Direction
  1. M-Unit - Cable Kit
    Part #
    19-0609
    The m-Unit Cable Kit is a ready made set of cables to aid in the assembly of a wiring harness. This cable kit consists of top grade copper-strand cables and will help you doing quick work of creating a new wiring harness. The different cable diameters and colors are ideally suited for application in connection with th... 
  2. MotoGadget M-Unit Basic
    Part #
    19-0610
    The m.unit basic is the new digital control unit from Motogadget based on the reputable m.unit V.2. Undergoing significant development and improvements, it is now equipped with 12 inputs, 10 outputs, and replaceable high-quality cable clamps. The m.unit basic is made of a newly designed high-performance thermosetting p... 
  3. Turn Signal - M-Blaze Pin - Black - MotoGadget
    Part #
    19-0608
    m-Blaze Pin Blinker The m-Blaze Pin from motogadget – setting new benchmarks for bolt-on blinker with Power LED technology.Its tiny dimensions and minimal design make it almost disappear on the vehicle. Due to the IntensiLED® Technology, the emitted light is extremely bright when switched ON and definitely c... 
  4. Switch - 3 Push Button Housing 22mm - MotoGadget
    Part #
    19-0605
    m-Switch Universal 3 push button controller (momentary switch) In combination with a motogadget m-Unit it controls all electrical devices like lights, flasher, starter engine, horns and much more Billet aluminum housing is available mirror-polished or anodized gloss black Hidden stainless steel bolts clamp it to... 
  5. M-Stop - Digital Modulator - Brake Light - MotoGadget
    Part #
    19-0603
    The adjustable digital brake light control m-Stop increases your driving safety. With different flashing modes your standard brake light will be upgraded to a striking warning light. The subsequent traffic will be recognizing faster and better when you are braking. Improves the security of all vehicles. Use as a b... 
  6. M-Button - MotoGadget
    Part #
    19-0601
    m-Button Another innovation from motogadget: the m-Button.It's a big help - in combination with the new m-Unit V.2 - in reducing 'cable clutter' and simplifying wiring harnesses. Integrated into the handlebar tube - or any other adequate location - this tiny cylinder will electrically connect all handlebar instrume... 
  7. Turn Signal - M-Blaze Disc - Left - LED - 7/8 inch and 1 inch Handlebars
    Part #
    19-0606
    m-Blaze Disc Black Left side LED bar end blinker for 7/8" or 1" handlebars - SOLD EACH Dimensions Diameter: 35 mm (1 3/8")Total length: 68 mm (2 11/16")Length protruding out of the bar: 20 mm (3/4")Length inside the bar: 48 mm Length of cable: 100 cm (40")Weight: approx. 40 g Installation: rubber clamp... 
  8. Plug Connector Kit - Compact 6-Pole - MotoGadget
    Part #
    19-0604
    Plug connector set 'compact' 6 pin This plug connector is made of synthetic material and has proved to be reliable for many years in the automotive field. Due to its compact design it is especially suitable for motorcycles.Our plug connector sets contain the following parts:1 x socket casing1 x plug housing6 x soc... 
  9. M-Relay - Standard - 12V 20A - MotoGadget
    Part #
    19-0602
    The m-Relay is a very compact relay able to operate almost all appliances. High or low beam, horn, ignition etc. can be switched easily and almost lossless.  Higher current loads are put closer to the appliance (e.g. lights). Ignition lock and/or handlebar switch only have to bear a minimal pilot current loa... 
  10. Turn Signal - M-Blaze Disc - Right - LED - 7/8 inch and 1 inch Handlebars
    Part #
    19-0607
    m-Blaze Disc Black Right side LED bar end blinker for 7/8" or 1" handlebars - SOLD EACH Dimensions Diameter: 35 mm (1 3/8")Total length: 68 mm (2 11/16")Length protruding out of the bar: 20 mm (3/4")Length inside the bar: 48 mm Length of cable: 100 cm (40")Weight: approx. 40 g Installation: rubber clam... 
View as List Grid

10 Items

per page
Set Descending Direction