Handlebars

Handlebars

Your Yamaha restoration, café racer or bobber build won’t be complete without a set of quality XS650 clip-on handlebars. Mikes XS carries Hugh’s Handbuilt XS650 speedster bars and XS solid riser bushing kits for mounting. We can also help you customize your ride with Yamaha XS Clubman bars and XS650 drag bars, ape hangers, and various XS replica bars. When you’re ready to mount, check out our XS650 damper rubbers and handlebar top clamps. 

View as List Grid

35 Items

per page
Set Descending Direction
  1. Handlebar damper rubbers-(Set/4)
    Part #
    02-6500
    Handlebar damper rubbers (Set of 4) - Fits into Top crown & dampens vibration. 
  2. Handlebar - CB750 replica 7/8"
    Part #
    25-1084
    Handlebar - CB750 replica. Chrome.31.5" wide, 4.5" rise, 7.25" pullback and 6" center width. 
  3. Handlebar - Virago Type - Chrome 7/8"
    Part #
    25-1086
    Early Virago Type Bar - Chrome. Width - 28", Rise - 5 3/8", Pullback - 10 1/4" x 7/8"Dia.XS400, XS650 
    • Out of stock
  4. Handlebar - Dirt/Street Track Type - Black 7/8"
    Part #
    25-1087
    Dirt track/Street track Bar - Black. Width - 34 1/2", Rise - 3 3/8", Pullpack 8 1/4" x 7/8"Dia.XS360, XS400, XS650 
  5. Handlebar - Dirt/Street Track Type - Chrome 7/8"
    Part #
    25-1088
    Dirt track/Street track Bar - Bright Chrome.Width - 34 1/2", Rise - 3 3/8", Pullback - 8 1/4" x 7/8"Dia.XS360, XS400, XS650 
  6. Clip-On Handlebar Set - 34mm - Chrome
    Part #
    25-1089
    Clip-on handlebar Set - Chromed Steel - Fits: 34mm. forks on 1971-76 650'sNote: Clip-Ons are Race parts and may Not work with the stock controls/switches on All models/years. Bar length is 8.0"Bikes with standard 34mm fork tubes: R5, DS7 1970-72, RD350 73-75, TX500 73-75, XS500 73-75, XS1, XS1b, XS2, TX650 1970-73.Plea... 
  7. Clip-On Handlebar Set - 35mm - Chrome
    Part #
    25-1090
    Clip-on handlebar Set - Chromed Steel - Fits: 35mm. forks on 1977-84 650'sNote: Clip-Ons are Race parts and may Not work with the stock controls/switches on All models/years. Bar length is 9.5"Bikes with standard 35mm forks: XS400 Maxim 82-83, SR500 E/F/G/H 78-81, XS500 C/D/E 76-78, XJ550 RH/RJ/RK Seca 81-83, XZ550 RJ... 
  8. 35mm Clip on Handlebar - black
    Part #
    25-1091
    35mm Clip on Handlebar - blackNote: Clip-Ons are Race parts and may Not work with the stock controls/switches on All models/years. Bar length is 8.0" 
  9. 33mm Clip On Handlebar - chrome
    Part #
    25-1093
    33mm Clip On HandlebarNote: Clip-Ons are Race parts and may Not work with the stock controls/switches on All models/years. Bar length is 8.0" 
  10. 34mm Clip on Handlebar - Black
    Part #
    25-1094
    34mm Clip on Handlebar - Black 
  11. 36mm Clip on Handlebar - chrome
    Part #
    25-1096
    36mm Clip on Handlebar - chromeNote: Clip-Ons are Race parts and may Not work with the stock controls/switches on All models/years. Bar length is 8.0" 
  12. Handlebar - Custom Riser Type - Chrome 7/8"
    Part #
    25-1099
    7/8" Diameter Riser Type Chrome Custom Bars for all XS650's Bars fit directly to the top of the triple tree where stock bar clamps mount(the stock rubber damping system is retained). Mounting bolts included.Overall Rise - 4.5" Width - 31" Pullback 10" 
  13. Handlebar bar top Clamp
    Part #
    37-0002
    Chrome Custom handlebar bar top Clamp - with plated allen socket bolts. Fits: All 650's 1970-84 
  14. Hugh's Handbuilt Black Speedster Bars
    Part #
    19-0500
    Hugh's Black Speedster handlebars. Inspired by Hughs very first build, these bars are the perfect fit for your XS650 or SR500 (and others, check bolt pattern on upper triple tree). The XS650 and other bikes suffer from a short top tube, and when combined with drag bars or clip-ons, can become rather cramped.Hugh built... 
    • Out of stock
  15. Hugh's Handbuilt Raw Speedster Bars ( No Finish) (XS650/SR500 1974 and Up)
    Part #
    19-0501
    Hugh's Yamaha XS650 Raw Speedster handlebars (no finish.) 1974 and Up! Inspired by Hughs very first build, these bars are the perfect fit for your Yamaha XS650 or SR500 (and others, check bolt pattern on upper triple tree). The XS650 and other bikes suffer from a short top tube, and when combined with drag bars or clip... 
  16. Hugh's Handbuilt Solid Riser Bushing Kit
    Part #
    19-0506
    Hugh's Yamaha XS650 SR500 Solid Riser BushingsSet of 4 Bushings and O-RingsMachined from 6061 AluminumStainless Hardware for RisersA must have. Get rid of that sloppy rubberBrushed Aluminum FinishMachined in-house from solid 6061 Aluminum, these new solid bushing include rubber o-rings to help fight vibrations and prov... 
  17. Handlebar - XS650 "Special" Pullback Type - Chrome 7/8"
    Part #
    25-1082
    XS650 "Special" Stock Pullback Type Bar - Chrome. Width - 29", Rise - 7 3/8", Pullback - 13" x 7/8"Dia.XS400, XS650 
  18. Handlebar - XS650 B/C Replica - Chrome (Drilled) 7/8"
    Part #
    25-0654
    XS650B/C Replica bar - chrome bar with original type welded in bar weights.Width - 27 3/4", Rise - 5 1/2", Pullback - 10 1/2".Note: Bar has holes drilled for switch wires (wires pass thru bars) as on original XS650B/C (1975-76) models. 
  19. Handlebar - XS1 XS2 Replica - Chrome 7/8"
    Part #
    25-0652
    XS1/XS2 Replica Bar - Chrome Bar with original type welded in bar weights. Width - 30 1/2", Rise 4 3/4", Pullback - 10" x 7/8"Dia.XS400, XS650 
  20. Lane Splitter handlebars TC Bros Choppers 7/8"
    Part #
    19-0440
    Lane Splitter handlebars 9.25" rise, black powder coated. CNC mandrel bent for smooth bends and perfect symmetry. Uprights angle inward. 9 1/4" rise, 2 1/2" pullback 28" overall width. 7/8" OD 13g a wall (.095" thick) steel tubing. If you have 7/8 diameter bars and your handlebar clamp spacing is 6 3/4" or less (out... 
  21. Ape Hanger Handlebars TC Bros Choppers
    Part #
    19-0441
    Ape Hanger Handlebars, 12" rise, black powder coat. Bent on a CNC Mandrel bender for smooth bends and perfect symmetry. 7/8" OD 13g a wall (.095" thick) steel tubing. If you have 7/8 diameter bars on your bike, and your handlebar clamp spacing is 5 1/4" or less (outside to outside), these bars should fit our bike (lo... 
  22. Drag handlebars - black. TC Bros Choppers
    Part #
    19-0443
    Black Drag handlebars. 7/8" OD 13g a steel tubing. Bent on a CNC Mandrel bender. If you have 7/8 diameter bars on your bike, and your handlebar clamp spacing is 8" or less (outside to outside), these bars should fit your bike. 28" overall length.Custom projects. 
  23. Handlebar - Drag Bar Type - Chrome 7/8"
    Part #
    25-0051
    Drag Bar - Chrome Width 27.5" - Rise 0" - Pullback 3 3/4" x 7/8"Dia.XS400, XS650 
  24. Handlebar - Black Drag Bar 7/8"
    Part #
    25-0052
    Drag Bar - Gloss BlackWidth 27.5" - Rise 0" - Pullback 3 3/4" x 7/8" Dia.All bikes with 7/8" bars. 
  25. Handlebar - Clubman/Cafe Type - Chrome 7/8"
    Part #
    25-0109
    Clubman/Cafe Bar - Chrome Width - 27" - Rise - 3" - Pullback - 1"XS650, XS400 
  26. Handlebar - Clubman/Cafe Type - Chrome
    Part #
    25-0110
    Clubman/Cafe Bar- Chrome Width 26" - Rise 3" - Pull back 4"XS650, XS400 
    • Out of stock
  27. Handlebar - SuperBike Bar - Clubman Chrome 7/8"
    Part #
    25-0112
    SuperBike Bar - Clubman Chrome Width 28" - Rise 4" - Pull back 4" 
  28. Handlebar - Clubman 7/8"
    Part #
    25-0113
    Handlebar - Clubman. Length 27 1/2", 7/8" diameter.Center 6 1/2", Rise 4 3/4", and pull back 4 1/2" 
  29. Handlebar - Clubman Black 7/8"
    Part #
    25-0114
    Handlebar - Clubman - Black. Length 27 1/2", 7/8" diameter.Center 6 1/2", Rise 4 3/4", and pull back 4 1/2" 
  30. Handlebar - Daytona Tour Type - Chrome 7/8"
    Part #
    25-0122
    Daytona Tour Type Bar - Chrome.Width 29 1/4" - Rise 2 7/8" - Pullback 7 1/4" x 7/8"Dia. 
  31. Handlebar - European Type - Chrome 7/8"
    Part #
    25-0123
    European Type Bar - Chrome.Width 30" - Rise 2 1/2" - Pullback 5 1/2" x 7/8"DiaXS400, XS650 
  32. Handlebar- Superbike Type - Chrome 7/8"
    Part #
    25-0124
    Superbike Type Bar - Chrome.Width - 30 1/2", Rise - 2 1/2", Pullback - 5 5/8" x 7/8"Dia.XS400, XS650 
  33. Handlebar - GS-E Type - Chrome 7/8"
    Part #
    25-0125
    GS-E Type Bar - Chrome (use for XS Standard). Width - 30", Rise - 4 1/8", Pullback - 10 1/2" x 7/8"Dia.XS400, XS650 
    • Out of stock
  34. Handlebar - Black Superbike 7/8"
    Part #
    25-0126
    Handlebar - Black Superbike 7/8"XS650, XS400, all bikes that use 7/8" handlebarsDimensions:Width - 30 1/2", Rise - 2 1/2", Pullback - 5 5/8" x 7/8"Dia. 
  35. Handlebar - Clubman/Cafe Type - Black 7/8"
    Part #
    25-0108
    Clubman/Cafe Bar - Black Width - 27" - Rise - 3" - Pullback - 1"XS650, XS400 
View as List Grid

35 Items

per page
Set Descending Direction