Carb Holders Air Filters Fuel Filters Breather Vent Parts

Carb Holders Air Filters Fuel Filters Breather Vent Parts

Cracked carb boots may be the hidden source of your XS popping and backfiring. Mike XS has stock Mikuni carburetor manifolds, band clamps and stainless steel screws to fix most mounting issues. You can also dress up your XS chopper restoration with TC Bros Choppers billet aluminum intake manifolds. We carry stock-type Yamaha XS air filters, as well as performance pod air filters, and also fuel filters and hoses to complete your XS fuel flow restoration. 

View as List Grid

Items 1-48 of 74

Page
per page
Set Descending Direction
  1. Blind Plug - carburetor rubber passage plug
    Part #
    48-1447
    Blind Plug - Carb Holder Air Barb - OEM Ref.# 1J7-13569-00. Also called carburetor rubber passage plug.Fits: 1978-84 XS650 stock carb holders & blocks off air barbs when vacuum petcocks are replaced with manual type petcocks. Order quantity needed.Also fits: XS1100 80-81Fits: All Mikes XS Carb Holders and Carb Hold... 
  2. Wire Hose Clamps 10mm pack of 10
    Part #
    20-4018
    Wire Spring type Hose Clamp. 3/8" (10mm.) inside Diameter size (unexpanded) in packs of 10pc. Suitable for matching fuel or vent hose. 
  3. Wire Hose Clamps 9mm - Pack of 10
    Part #
    20-4017
    Wire Spring type Hose Clamp. 0.35" (9mm.) inside Diameter size (unexpanded)in packs of 10pc. Best Size to fit Standard XS petcocks using 20-4009/10 black rubber fuel line. 
  4. Wire Hose Clamps 5/16"  Pack of 10
    Part #
    20-4016
    Wire Spring type Hose Clamp. 5/16" (8mm.) inside Diameter size (unexpanded) in packs of 10pc. Suitable for matching fuel or vent hose. 
  5. Wire Hose Clamps 1/4"  Pack of 10
    Part #
    20-4014
    Wire Spring type Hose Clamp. 1/4" (6mm.) inside Diameter size (unexpanded) in packs of 10pc. Suitable for matching small fuel or vent hose. 
  6. Wire Hose Clamps 3/16"  Pack of 10
    Part #
    20-4012
    Wire Spring type Hose Clamp. 3/16" (4mm.) inside Diameter size (unexpanded) in packs of 10pc. Suitable for small carb vent hose. 
  7. Black Rubber Fuel Line 1/4"
    Part #
    20-4010
    Black Rubber Fuel Line - (original thin wall type) 1/4" ID (6mm.) - 1pc. x 11.5" 
  8. Black Rubber Fuel Line 3/16"
    Part #
    20-4009
    Black Rubber Fuel or Vent Line - ( original thin wall type ) 3/16" (4.5mm.) ID x 11.5"Fits: Keihin Flatslide PWK 32mm. XS Performance Carbs for XS650.Note: Each Carb requires 1 pc. to go to each fuel feed (Petcock). 
  9. Clear square inline Fuel Filter.
    Part #
    20-0013
    Clear square inline Fuel Filter. 
  10. Fuel line cut off - 6mm
    Part #
    20-0009
    Fuel line cut off for quick and easy way to cut off fuel supply when working on your bike. 6mm. 
  11. Plastic Fuel line T (3/16") 6mm
    Part #
    20-0008
    Plastic Fuel line T (3/16") 6mm.For splitting fuel line into petcocks/carbs. 
  12. Fuel Line T 5/16"
    Part #
    20-0007
    Fuel Line T - Fits: 5/16" ID fuel line (8mm).Ideal for linking output from two fuel petcocks into one. 
  13. Brass Fuel Line T- Fittings 3/8"
    Part #
    20-0006
    Brass Fuel Line T- Fittings 3/8" 
  14. XS650 Billet Aluminum Intake Manifolds TC Bros Choppers
    Part #
    19-0460
    TC Bros XS650 Billet Aluminum Intake Manifolds Get rid of your cracked and leaking rubber intake manifolds and replace them with our super trick CNC machined billet aluminum racing intakes. These are very sturdy and improve flow to your motor. They are perfect when installing aftermarket carbs. Your stock rubber intake... 
  15. Gasket (Pk./2.) - Intake Spigot XS650
    Part #
    18-0865
    Gasket (Pk./2.) - Intake Spigot (Carb Holder Rubber) - Fits: 1970-84 650's OEM Ref.# 256-13556-01 j XS1 XS1B XS2 TX650 XS650Fits: Between XS650 Manifolds (Carb Spacers) and cylinder head and between the XS manifolds and the carb holders for the PWK 32.Fits: Keihin Flatslide PWK 32mm. XS Performance Carb Set for XS650.... 
  16. Band Clamp - Fits 121-127mm
    Part #
    15-0702
    Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds to Filter Joints and all purpose uses except carb holders.Fits: 121-127mm. (4.76"-5.00") Diameters 
  17. Band Clamp Fits 115-121mm
    Part #
    15-0701
    Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds to Filter Joints and all purpose uses except carb holders.Fits: 115-121mm. (4.53"-4.76") Diameters 
  18. Wire Hose Clamps 13mm 1/2" pack of 10
    Part #
    20-4020
    Wire Spring type Hose Clamp. 1/2" (13mm.) inside Diameter size (unexpanded)in packs of 10pc. Suitable for matching fuel or vent hose. 
  19. Carb Holder Set 1980-84 XS650 Mikuni BS34 CV carburetors
    Part #
    20-6038
    Carb Holder Set Fits: Stock Mikuni BS34 CV Carbs on 1980-84 XS650's + Kit Includes 1pc. each of carb holders OEM # 3G1-13586 & OEM # 3G1-13596 
  20. Precision Carb Sync Gauges
    Part #
    35-1388
    Dual Carb Sync Gauge Set with built in adjustable Pulse Dampers mounted on bracket and with hoses.Precision Diaphragm type gauge set originally designed for Professional Motorcycle shop use in Japan.Note: Sync gauges hoses hook up to carb holder vacuum air barbs (not included).Your bike must have these air barbs in ord... 
  21. Air Filter Retaining Clip - 533 OEM Type - XS650 (76-79)
    Part #
    99-5006
    Air Filter Element Retainer Clip. Fits: XS650 C/D/E/F/2F/SE/SF (1976-79)OEM Ref. # 533-14468-02-00 
  22. Air Filter Retaining Clip - 3G1 OEM Type - XS650 (80-84)
    Part #
    99-5005
    Air Filter Retaining Clip - Fits: XS650 1980-84 with stock 3G1 type air filters.OEM Ref.# 3G1-14468-00 
  23. Carb Holder stainless steel screw set
    Part #
    49-0741
    Stainless steel socket head screws for carb holders Set of 4 for stock carb holders as used on 1970-84 XS650 's, XS400 's 
  24. 38mm. Carb Holders with Air Barbs for Mikuni BS38 CV
    Part #
    48-7479
    38mm. Carb Holder Set for stock Mikuni BS38CV carburetors.Same as used on 70-77 models. Air barbs are for balancing carbs or operation of original vacuum type petcocks.Fits: All 1970-77 650's. Some models need spacers.OEM reference: 447-13555-01-00 LH, 447-13565-01-00 RH 
  25. Carb Holder Set Mikuni BS38 CV carburetors
    Part #
    48-1480
    Carb Holder Set Fits: Stock Mikuni BS38 CV Carburetors on TX650A 1974 & XS650B/C/D (1975-77) & XS650 80 - Kit Includes 1pc.(RH) #447-13565 & 1pc.(LH) #447-13555 Note: These fit to 1978-79 models carbs but lack the Air barbs that operate the stock vacuum type petcocks. 
  26. Carb Holder Kit Yamaha XS1100
    Part #
    43-4851
    Carb Holder Kit, includes 2 LH and RH. XS1100 E/F/G/H 1978-81, XS1100 LH/LH Midnight Special 1980-81, XS1100 SF/SG/SH Special 1979-81 
  27. Carb Holder Kit Yamaha XS750 XS850
    Part #
    43-4850
    Carb Holder Kit XS750 1978-79, XS850 1980-81OEM reference 2F3-13586-01-00*** Pack of 3 
  28. Air Filter Yamaha XS1100 1978-1984
    Part #
    43-1503
    Air Filter XS1100 78-84 
  29. Air Filter Yamaha XS850 1980-1982
    Part #
    43-1502
    Air Filter XS850 80-82 
  30. Carb Holder Yamaha SR500 1978-1981 TT500 XT500
    Part #
    41-4850
    Carburetor Holder SR500 E/F/G/H 1978-81. Replace your worn and cracked carb holders. Includes one carb holder and one intake gasket.Also fits: TT500 C/D/E/F/G/H 1976-81, XS500 1976-81, XT500 C/D/E/F/G/H 1976-81 
  31. 52mm Clamp on Air Filter
    Part #
    41-1503
    52mm Universal Clamp on Air FilterFits: Yamaha SR500, TT500, XT500, XJ650, XJ900, XS750 & XS850 & XS1100 through 1979Also fits:Honda CB400 N/T, CB650 Z, CB750 K Kawasaki KZ250, KZ400 B/G/L, ZR400, KZ440 A/C/D/H, KZ550 G/H, GPz550, ZR550, KZ650 Suzuki GS400 S, GSX400 E/F/L, GT500, GS550 E/M, GT750 
  32. Air Filter SR500
    Part #
    41-1501
    Clamp on Air Filter.Fits: SR500 1978-83 
  33. Carb Holder Set XS400
    Part #
    40-4850
    Carburetor Holder Set with gaskets for stock XS400 1977-81.Replaces hardened and cracked carb holders.OEM reference numbers 2A2-13586-00-00 LH 2A2-13596-00-00 RH 1L9-13556-10-00 intake manifold gaskets 
  34. 48mm clamp on air filter XS400 SE 1978-82
    Part #
    40-1503
    48mm universal clamp on air filter XS400 SE 78-82Fits: Yamaha: XS250 SE 78-81, XS400 SE 78-82, XT500 76-80 Honda: CB250 N/RS, CB400 N, CBX550 Kawasaki: KZ250 A/B, GPz305, GPz400 Suzuki: GS250 T/E, GSX250, GSX400 E,GS400, GS450 
  35. Air filter - XS400, Seca,  Maxim 1982-83
    Part #
    40-1502
    Air filter, XS400 Seca, Maxim 82-83 Fits:1982 XS400J 1982 XS400RJ 1983 XS400K 1983 XS400RKDimensions : 3.8 x 4.5 x 3.8 inches 
  36. Air filter - XS360 XS400 1976-82
    Part #
    40-1501
    Air filter - XS360 XS400 76-82.Does not fit Maxim or Seca models.Also Fits XS250 78-82 
  37. Band Clamp Fits 109-115mm
    Part #
    15-0700
    Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds to Filter Joints and all purpose uses except carb holders.Fits: 109-115mm (4.29"-4.53") Diameters 
  38. Band Clamp Fits 103-109mm
    Part #
    15-0699
    Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds to Filter Joints and all purpose uses except carb holders.Fits: 103-109mm (4.00"-4.29") Diameters 
  39. Rubber Joint
    $14.94
    Part #
    15-0674
    Rubber Joint (between Air filter boxes) and SpringFits: Stock Air boxes used on 1974-84 650's. 
  40. BS38 Carb Holder Clamp
    Part #
    15-0673
    Carb Holder band Clamp - 56-61 mm. range. Fits carb holders for stock Mikuni BS 38 CV carbs as used on North American 1970-79 XS/TX650's 
  41. BS34 Carb Holder Clamp
    Part #
    15-0672
    Carb Holder band Clamp - 49-55 mm. range. Fits carb holders for stock Mikuni BS 34 CV carbs as used on North American 1980-84 XS650's 
  42. Rubber Joint
    $12.93
    Part #
    15-0671
    Rubber Joint - Carb to Air Filter Box - 1Pc. of Air box rubber Joint & 2pc.of Tension Spring - Fits: 1970-79 XS/TX 650's - Carb to air box - right or left side. Each bike requires 2 sets. 54MM 
  43. Air Filter - 3G1 OEM Type - XS650 (80-84)
    Part #
    15-0655
    Air Filter - Fits: XS650G-K - All 1980-84 650's - 2 used per bike.OEM Ref.# 3G1-14451 Made in Japan 
  44. Air Filter - 447 OEM Type - TX650A/XS650B
    Part #
    15-0654
    Air Filter - Fits: TX650A 1974, XS650B 1975 - 2 used per bike OEM Ref.# 447-14451-01 Made in Japan 
  45. Air Filter - 533 OEM Type - XS650 (76-79)
    Part #
    15-0653
    Air Filter - Fits: XS650 C/D/E/SE/F/SF/2F 1976-79 - 2 used per bike.OEM Ref.# 533 -14451-00 Made in Japan 
  46. Air Filter - OEM Type - XS2/TX650 (72-73)
    Part #
    15-0652
    Air Filter - Fits: XS2/TX650 1972-73 - 2 used per bike OEM Ref.# 306-14451 Made in Japan 
    • Out of stock
  47. Air Filter - OEM Type - XS1/XS1b (70-71)
    Part #
    15-0651
    Air Filter - Fits: XS1/XS1b 1970-71 - 2 used per bike OEM Ref.# 256-14451-00 Made in Japan 
  48. K&N 2 1/8" (54mm) Universal Clamp on air filter
    Part #
    15-0554
    Genuine K&N Universal motorcycle Air filter. Sold each.3" outside diameter, 4" long, 5/8" flange length, offset flange.Note: legal in California only for racing vehicles.Yamaha XS650 Also compatible with XS400, XS850 80-81, XS1100 78-83. Order one per carb. 
    • Out of stock
View as List Grid

Items 1-48 of 74

Page
per page
Set Descending Direction