Search by Motorcycle
Search by Motorcycle

New Items

New Items
View as List Grid

Items 1-48 of 233

Page
per page
Set Descending Direction
  1. XSCharge XS650 Electronic Ignition & E-Advancer kit
    Part #
    200-2903
    Simplified XSCharge Electronic Ignition system sensor works with the Electronic Advancer. Designed for replacement of contact point ignitions only. Kit includes: Electronic Ignition System plate, 60 degree rotor and Electronic Advancer (#14-0648)You can find the 60 degree rotor separate #14-0703 Installation Instructi... 
  2. XSCharge™ High Output Electronic Ignition Kit + E-Advancer - Basic
    Part #
    200-2910
    Basic XSCharge High Output Electronic Ignition Kit with Electronic Advancer.Fits: All 1970 1970-84 XS650's. Kit Includes: Complete assembly with E-Advancer (#14-0903), Ultimate high output XS performance Ignition Coil (#17-6903),XS Performance Yellow Silicone Copper core Plug Wire set (20" each)(#23-2906), Two 5K NGK s... 
  3. XSCharge™ Electronic Igntion Kit + E-Advancer - High Output - Ultimate - XS650
    Part #
    200-2913
    Ultimate XSCharge™ High Output Electronic Ignition Kit with Electronic AdvancerKit Contains:Complete assembly with E-Advancer (#14-0903), Ultimate high output XS performance Ignition Coil (#17-6903),XS Performance Yellow Silicone Copper core Plug Wire set (20" each)(#23-2906), Two 5K NGK spark Plug Caps (XS#23-31... 
  4. XSCharge™ Electronic Ignition with E-Advancer/Ignition Coil Kit - Basic - XS650 1970-1979
    Part #
    200-2905
    Basic System XSCharge™ Electronic Ignition with E-Advancer and Ignition Coil.Kit Includes: Complete E-Advancer assembly (#200-2649 ), Dual Output Points type Ignition Coil (#17-6822) and 2 5K-NGK Spark Plug Caps (#23-3113) and 1 set of Point Plate Screws(2) & washers(2)(#14-0655) Installation Instructions P... 
  5. XSCharge™ XS650 PMA (Permanent Magnet Alternator)
    Part #
    24-2669
    XSCharge™ XS650 PMA (Permanent Magnet Alternator) Kit with 200 Watt stator built specially for the Yamaha XS650.Replaces your old rotor that has failed or magnet that has weakened over time. Replaces regulator/rectifier with solid state electronics.Specifically built for the XS650. Fits 1970-79 XS650 with OEM poi... 
  6. Capacitor Kit - PMA Charging System - XS650
    Part #
    61-1010
    Battery Eliminator Capacitor Kit for XSCharge™ XS650 PMA (Permanent Magnet Alternator).  Use this capacitor in place of your battery when installing our XSCharge™ XS650 PMA kit for Yamaha XS650. This will convert your bike to a battery-less charging system with kick only starting.Dimensions: 2" x 3-5/8... 
  7. Carburetor Conversion Kit - Assembled - XS400 - XS Performance
    Part #
    48-9004
    XS Performance Carb XS400 ASSEMBLED KITKit include:Right & Left Carbs, Manifold Gaskets (#18-0865), Carb holder screws (#49-0741), 2 into 1 Throttle Cable (#48-9046), Billet Aluminum Intake Manifolds, Rubber Hose, 49mm Band clamp (#15-0685), 67mm Band Clamps (#15-0686), Fuel Line Filter (#20-0013) and Air Filters (... 
  8. Carburetor Conversion Kit - NOT Assembled - XS650 - XS Performance
    Part #
    48-9001
    XS Performance Carb XS650! ** UNASSEMBLED KIT **32mm Flatslide Carb Set - Includes: Right & Left Carbs, Manifold Gaskets (#18-0865), Carb holder screws (#49-0741), 2 into 1 Throttle Cable (#48-9046), Billet Aluminum Intake Manifolds, Rubber Hose, 49mm Band clamp (#15-0685), 67mm Band Clamps (#15-0686), Fuel Line Fi... 
    • Out of stock
  9. Carburetor Conversion Kit - Assembled - XS650 - XS Performance
    Part #
    48-9000
    XS Performance Carb XS650! ** ASSEMBLED KIT **Here is your option to buy a completely Assembled Kit.Please check Item # 48-9001 for Unassembled Kit with all the parts listed if you prefer to do it yourself.Our Carbs were Dyno tested and tuned for XS650's.A replacement for the 1980 to 84 stock Mikuni BS34 Carbs or your... 
    • Out of stock
  10. Carburetor Holders - XS400 - Pkg 4
    Part #
    40-4850
    Carburetor Holder Set with gaskets for stock XS400 1977-81.Replaces hardened and cracked carb holders.OEM reference numbers 2A2-13586-00-00 LH 2A2-13596-00-00 RH 1L9-13556-10-00 intake manifold gaskets 
  11. Clutch Repair Kit - XS650
    Part #
    39-6600
    Clutch Repair Kit - save over buying separately. Includes:6 Steel friction plates (39-6507)7 Friction plates (39-1133)1 Tab lock washer (39-6512)1 Clutch cover gasket (18-0864)1 Oil filter cover gasket (18-0856)1 Set of clutch springs (39-6506)Other items to consider purchasing separately for your clutch repair dependi... 
  12. Rim - H Type - 2.15x18 - Black - 36 Spoke - XS650 - XS400
    Part #
    34-3182
    H 2.15x18 36 hole shouldered aluminum rim BlackHard to find. Works with XS650, XS400 36 spoke hubs. Classic 36 spoke pattern works with other vintage bikes but we cannot guarantee which. This is a quality rim comparable to what you see on other sites for much more money.Dot approved.Great for chopper, bobber and ra... 
  13. Rim - WM Type - 2.5x18 - Aluminum - 36 Spoke - XS650 - XS400
    Part #
    34-0007
    WM 2.5x18x36 hole Rim, polished aluminum.Very hard to find new. Classic 36 hole pattern will work with many vintage bikes. Works with XS650, XS400.This is a quality rim comparable to what you see on other sites for much more money.Great for chopper and bobber projects.DOT approved. 
  14. XSCharge™ PMA and High Output Ignition Kit - XS650
    Part #
    24-2671
    Complete High Output Standard Ignition/XSCharge™ XS650 PMA Package.  Fits all 1970-84 XS650's. Kit contains one 24-2669 XSCharge™ XS650 PMA unit (200 Watt) and the Complete High Output Standard Ignition unit. XSCharge™ XS650 PMA  (Permanent Magnet Alternator) built specially for th... 
  15. XSCharge™ PMA and Basic High Output Ignition Kit - XS650
    Part #
    24-2670
    XSCharge™ XS650 PMA and Basic High Output Standard Ignition package.  Fits all 1970-84 XS650's. Kit contains one 24-2669 XSCharge™ XS650 PMA unit (200 Watt) and one Basic High Output Standard Ignition kit . XSCharge™ XS650 PMA (Permanent Magnet Alternator Kit) built specially for t... 
  16. Rotor - Alternator - XS650 - 1980-1983
    Part #
    24-2652
    New Alternator Rotor - Not a rewind. 1980-1983 Yamaha XS650 No Core Required. For Yamaha TCI Type ignitions.   
  17. XSCharge™ PMA and Ultimate Electronic Ignition Kit w/E-Advancer - XS650
    Part #
    24-2607B
    XSCharge™ XS650 PMA and Ultimate Electronic Ignition with E-Advancer Package Kit contains: One XSCharge™ XS650 PMA unit (200 Watt) #24-2669 and one Ultimate System Electronic Ignition with Electronic Advancer and Ignition Coil Kit Save money as a kit. Installation Instructions 
    • Out of stock
  18. XSCharge™ PMA and Basic Output Ignition Kit w/E-Advancer - XS650
    Part #
    24-2605
    XSCharge™ XS650 PMA /Basic Electronic ignition Package Kit contains: One XSCharge™ XS650 PMA unit (200 Watt) #24-2669 and one Basic Electronic Ignition system with Electronic Advancer and Ignition Coil Save money as a kit. Installation Instructions 
    • Out of stock
  19. XSCharge™ Electronic Ignition with E-Advancer/Ignition Coil Kit - XS650 1980-1983
    Part #
    200-2907
    Ultimate System Electronic Ignition with E-Advancer and Ignition Coil.Kit Includes: Complete E-Advancer assembly (#14-0903), Dual Output Points type Ignition Coil (#17-6822) and Two 5K NGK Spark Plug Caps (#23-3113) and 1 set of Point Plate Screws(2) & washers(2)(#14-0655), Advance Rod assembly (#14-0650) plus addi... 
  20. Exhaust Pipe Gasket Yamaha XS400 XS750 XS850 XS1100
    Part #
    43-1875
    Exhaust Pipe Gasket. XS400/750/850/1100. Sold EACH. Need one for each cylinder, so 2 for XS400, 3 for XS750/850, and 4 for XS1100. 
  21. Hugh's Handbuilt XS650 Lower Motor Mount Kit (XS650 1974 and Up)
    Part #
    19-0512
    Hugh's Yamaha XS650 Lower Motor Mount Kit. 1974 and Up! HHB Tested and Approved Laser Cut, Fully TIG Welded 1018 Steel Internally Threaded Front MountAll Hardware Provided. No more rusty OEM hardwareComplete Set of Front and Rear MountsDesigned and Manufactured in House from 1018 Steel, these new XS650 Motor Mounts are... 
  22. Float Needle Valve Assembly - XS2 - TX650 - XS650 - RD350 - XS1100
    Part #
    48-5019
    Carb Float Valve (Needle & Seat) - threaded type. Fits: XS2 (1972), TX650/A (1973-74), XS650B-F (1975-79) with stock Mikuni BS38 CV CarburetorsAlso fits:RD250 (DS6) and RD350 (R5) 70-72 OEM 168-14190-20-00, XS500 C/D 76-77, TX750A 73-74, XS1100 78-79 
  23. Carburetor Kit - XS400 - XS750 - XS1100 - Basic
    Part #
    40-4805
    Carburetor Repair Kit.  XS400 1979, XS750 E/F/SF/SE 1977-79, XS1100 /SE 1978-1979 Kit includes float needle assembly, chamber gasket and 1 brass O ring.Note: Kit for 1 Carb. 
  24. Rim - H Type - 2.15x18 - Aluminum - 36 Spoke - XS650 - XS400
    Part #
    34-1902
    H 2.15x18 36 hole shouldered polished aluminum rim. Very hard to find. Classic 36 hole pattern will work with many vintage bikes. Works with XS650, XS400. This is a quality rim comparable to what you see on other sites for much more money. Great for chopper, bobber projects. OEM reference number 94421-18146-00 for ref... 
  25. Clip - Sidecover Emblem
    Part #
    99-3001
    Sidecover Emblem Clip- Used to hold emblem to cover.  Sold inidividually.   
  26. Float Needle Valve Assembly - RD250 - RD350 - RD400 - XS1B
    Part #
    44-4810
    Float Needle Valve Assembly . Equivalent to OEM: 16030-017 16030-019 16030-025 23L-14107-25-002.5 Float Needle Valve Assembly found on Mikuni VM24- VM26 and VM28 carbs Fits Kawasaki Z1 KZ900 KZ1000 (77-80) KZ650 (77-81) Fits Yamaha TA-125, RD250 1973-75, RD350 1973-75 (OEM ), RD400 76-79, XS1B 1971... 
  27. Float - Brass - XS400 - XS500 - XS650 - XS750 - XS1100
    Part #
    40-4830
    Carb Float . XS400 1977-79, XS500 1978, XS750 1978-79, XS1100 1978-79.  Includes float and pin 
  28. Tire Valve Core Tool
    Part #
    35-0056
    Tire Valve Core Tool (Set of 2)For installation and removal of standard valve cores Aluminum handle. 5-1/2" Long 
  29. Rim - WM Type - 2.50x36 - Black - 36 Spoke
    Part #
    34-3185
    WM 2.50x18x36 hole Black rim, aluminum.Very hard to find new. Classic 36 hole pattern will work with many vintage bikes. Works with XS650, XS400. This is a quality rim comparable to what you see on other sites for much more money.Great for chopper, bobber and rat bike projects.DOT approved. 
  30. Wheel Bearing Kit - Rear - XS650 - XS1
    Part #
    28-6307
    Rear Wheel Bearing KitIncludes: (1)Rear Wheel Bearing - 6304 2RS Nachi ball bearing (with 2 synthetic shields), (1) Rear Wheel Bearing - 6305 2RS Nachi ball bearing (with 2 synthetic shields), (1) Rear wheel Oil Seal - (SO-27-52-5), (1) Rear wheel Oil Seal - (SD-35-62-9)Made in Japan - Highest Quality - make sure any y... 
  31. Wheel Bearing Kit - Front - XS650 RD350 RD400 SR500 TX650 XS750 XS850 XS1100
    Part #
    28-6306
    Front Wheel Bearing Kit Includes: (2) 6303-2RS Nachi ball bearing (with synthetic shields), (1) Front wheel Oil Seal - (SD-28-47-7), (1) Front Wheel Oil Seal - Speedo drive side - (SDO-45-56-6)Made in Japan - Highest Quality - make sure any you are comparing are made in Japan and same quality.Fits:RD350 A/B 1973-75, RD... 
  32. XSCharge™ PMA and Standard Ignition Kit - XS650
    Part #
    24-2672
    XSCharge™ XS650 PMA with Basic Standard Ignition Kit Package. Fits: All 1970-84 XS650's Now you can get the basic standard Ignition Kit, a proven reliable electronic trigger system that replaces the stock XS650 breaker point type ignition, with XSCharge™ XS650 PMA (Permanent Magnet Alternator Kit PMA,#... 
  33. Rectifier/Voltage Regulator Replacement For XSCharge™ XS650 PMA
    Part #
    24-2088
    Voltage Regulator/Rectifier Replacement Regulator/Rectifier for the XSCharge™ XS650 PMA (Permanent Magnet Alternator #24-2669).  Comes with a quick connector pigtail on the battery side for quick disconnect when needed. 
  34. Petock Repair Kit - XS650 - 1979-1983
    Part #
    20-0100
    Kit contains o rings and diaphragms to rebuild one fuel petcock. Does not include plastic diaphragm spacer block.Yamaha XS650 F, 2F, G, H, Special II, Heritage, 78-83.XS400 E, F, 2F, G, H, 78-81, SG/SH Special 80-81 XJ700 N/NC/S Maxim 85-86 XS750 SE after frame 311211 78, XS750SF 79, XS850 80-81 XJ900 83-85 XJ900R SEC... 
  35. Intake Manifolds - Billet - Aluminum - XS650
    Part #
    48-8119
    XS650 Billet Aluminum Intake Manifolds Get rid of your cracked and leaking rubber intake manifolds and replace them with our super trick CNC machined billet aluminum racing intakes. These are very sturdy and improve flow to your motor. They are perfect when installing aftermarket carbs. Your stock rubber intakes are... 
    • Out of stock
  36. Brake Line Kit - Braided Stainless Steel - 60 inch - TC Bros
    Part #
    19-0421
    Custom Stainless Braided Brakeline Kit TC Bros Choppers. 5 ft Brake line with two reusable 10 mm banjo fittings.Maxim operating pressure is 2500 PSI Easily cut to length to fit your application.Instruction included. 
  37. Builder Exhaust kit TC Bros Choppers XS650
    Part #
    19-0420
    Builder Exhaust kit, 1.5" diameter. Do it yourself exhaust kit for all years of the XS650. Kit includes 2 flanges and collars to fit the stock XS650 head, 2 mandrel bent 90 degree pieces, 2 mandrel bent 180 degree pieces and 2 straight length pieces. Tubing is 1.5" diameter 16 gauge mild steel. Flanges are 1/4" thi... 
  38. Weld on hardtail TC Bros Choppers XS650
    Part #
    19-0405
    Weld on rigid hard tail frame section. Uses stock wheel, tire, spacers, and chain adjusters. Constructed of 1 1/8" diameter steel tubing with .120" wall thickness. The 1 1/8" diameter is also the same as the stock XS650 frame tubing for a nice install that looks factory made. The axle plates are cut from 3/8" thi... 
  39. Forward Controls Kit TC Bros Choppers
    Part #
    19-0401
    Forward Controls Kit, with knurled pegs for Yamaha XS650.See universal linkage kit 19-0402.Chopper and bobber projects. 
  40. Master Cylinder -13mm - Universal - Magura
    Part #
    08-0253
    Magura 13mm Brake (RH) Master Cylinder. Genuine Magura, made in Germany.Replaces original types on single disc brakes Yamaha XS650 1977-84, Standard and Special.Compact lightweight design, complete with brake switch, matching 10 x 1.0 Banjo Bolt and banjo bolt washers (2pc.) Ideal for street tracker or custom build use... 
  41. Gear - 5th - Main Shaft - 24 Tooth - XS650 - 1973-1984
    Part #
    05-0869
    5th. Overdrive Gear for Yamaha XS650(73-84), Main shaft 0.979 mm ONLY 0.984 inches or 25 mm (Hole diameter)24 Tooth 5th. Pinion Gear. Replaces 23T 5th.Pinion GearGear fits to stock location and makes fifth gear taller (higher top speed in fifth but less torque and less vibration) but ratios in lower gears remains the s... 
  42. Footrest Rubber XS650 77-84, Flat Metal
    Part #
    02-2600
    Footrest Rubber XS650 77-84, Flat metal bottom type.Fits: 1977-84 XS650's, XS400.Sold each 
  43. Foot Pegs - XS650 - Analog - Pkg 2
    Part #
    19-0516
    Custom gripper footpegs.  2 in a package.  This is not a bolt on item.  Existing front footrest clevis pin must be removed.   Complete the following steps: 1. Drill out pin retaining stock pegs on stock peg mounts.   2. Drill existing clevis pin diameter hole.  Increase hole diameter to... 
  44. Carburetor Conversion Kit - Virago - XV750 - XV920
    Part #
    48-9005
    Brand new carburetor kit consisting of genuine Mikuni 34mm carburetors, pre-jetted with proven specs utilizing genuine Mikuni components. Pre-jetted carbs for stock to mildly modified engines CNC machined bolt on flange adapters with perfectly mated rubber connectors and clamps M6 x 1.0 threaded hole in... 
  45. Hugh's Handbuilt Fork Brace Raw
    Part #
    19-0511
    Hugh's Yamaha XS650/SR500 Fork Brace RawThis limited run is designed to work on the 19 inch front wheel and tire combo on OEM XS650s and SR500s with 35mm Forks. Early bikes with 34mm forks require a minor shaving of the mounting tabs on the forks, roughly 1mm. HHB Fork Braces are shipped with Stainless installation har... 
    • Out of stock
  46. Hugh's Handbuilt Lowering Kit  2"
    Part #
    19-0508
    Hugh's Yamaha XS650/SR500 2" Fork Lowering KitMachined Specifically for XS650 / SR500Fits 35mm Forks (late 1975 and newer on XS650)Lowers your front end, while maintaining proper valving and dampingEasily installed using basic hand toolsMachined from 6061 Aluminum and made specifically for the XS650s unusual internal d... 
  47. Hugh's Handbuilt Solid Riser Bushing Kit
    Part #
    19-0506
    Hugh's Yamaha XS650 SR500 Solid Riser BushingsSet of 4 Bushings and O-RingsMachined from 6061 AluminumStainless Hardware for RisersA must have. Get rid of that sloppy rubberBrushed Aluminum FinishMachined in-house from solid 6061 Aluminum, these new solid bushing include rubber o-rings to help fight vibrations and prov... 
  48. Hugh's Handbuilt "Windowed" Upper mount kit (XS650 1974 and Up)
    Part #
    19-0503
    Hugh's Yamaha XS650 Windowed Upper Motor Mount. 1974 and Up! Manufactured from 1018 Steel Includes NEW Hardware 1 Piece Design VS OEM 3 Pieces Lighter Weight Clean Appearance Another goodie from Hughs HandBuilt!   Hugh's Upper Motor Mount Kits for your XS650! OEM Motor Mounts are without a doubt, a ra... 
View as List Grid

Items 1-48 of 233

Page
per page
Set Descending Direction