Over 15 years in business
serving the yamaha community
Free Shipping / Easy Returns
within the contiguous U.S over $100
Largest supplier of xs parts
over 2000 parts in stock / ready to ship

New Items

New Items
View as List Grid

Items 1-48 of 244

Page
per page
Set Descending Direction
  1. Pamco Electronic Ignition, Rotor & E-Advancer Kit
    Part #
    14-0903
    Simplified Pamco Hall effect Electronic Ignition system sensor works with the Electronic Advancer. Kit includes: Electronic Ignition System plate, 60 degree rotor and Electronic Advancer (#14-0648)You can find the 60 degree rotor separate #14-0703 Installation Instructions 
  2. Ultimate Pamco Electronic Ignition with E-Advancer/Ignition Coil Kit
    Part #
    14-0907
    Ultimate System Pamco Electronic Ignition with E-Advancer and Ignition Coil.Kit Includes: Complete E-Advancer assembly (#14-0903), Dual Output Points type Ignition Coil (#17-6822) and Two 5K NGK Spark Plug Caps (#23-3113) and 1 set of Point Plate Screws(2) & washers(2)(#14-0655), Advance Rod assembly (#14-0650) plu... 
  3. Basic Pamco High Output Electronic Ignition Kit + E-Advancer
    Part #
    14-0910
    Basic Pamco High Output Electronic Ignition Kit with Electronic Advancer.Fits: All 1970 1970-84 XS650's. Kit Includes: Complete assembly with E-Advancer (#14-0903), Ultimate high output XS performance Ignition Coil (#17-6903),XS Performance Yellow Silicone Copper core Plug Wire set (20" each)(#23-2906), Two 5K NGK spar... 
  4. Ultimate Pamco High Output Electronic Ignition Kit + E-Advancer
    Part #
    14-0913
    Ultimate Pamco High Output Electronic Ignition Kit with Electronic AdvancerKit Contains:Complete assembly with E-Advancer (#14-0903), Ultimate high output XS performance Ignition Coil (#17-6903),XS Performance Yellow Silicone Copper core Plug Wire set (20" each)(#23-2906), Two 5K NGK spark Plug Caps (XS#23-3113), 1 set... 
  5. PAMCO Electronic Ignition for the XS400
    Part #
    14-0999
    XS400 Electronic Ignition System for the Yamaha Twin XS400 Dwell: Fixed 90 degrees. Requires two single output ignition coils (2.5 -5 OHM primary). Coil not include, available separate or may use stock coilsNote: For SOHC Points Models only.Kit Contains: Pamco Electronic Trigger Plate and rotor, (2) pcs NGK Spark Plug... 
    • Out of stock
  6. Basic Electronic Ignition with E-Advancer/XSCharge PMA Package
    Part #
    24-2605
    XSCharge PMA/Basic Electronic ignition Package Kit contains:One XSCharge PMA unit (200 Watt) #24-2669 and one Basic Electronic Ignition system with Electronic Advancer and Ignition Coil Save money as a kit. Installation Instructions 
  7. Ultimate Electronic Ignition with E-Advancer/XSCharge PMA Package
    Part #
    24-2607
    XSCharge PMA and Ultimate Electronic Ignition with E-Advancer Package Kit contains:One XSCharge PMA unit (200 Watt) #24-2669 and one Ultimate System Electronic Ignition with Electronic Advancer and Ignition Coil Kit Save money as a kit Installation Instructions 
  8. New Alternator Rotor - 1980-1983 Yamaha XS650
    Part #
    24-2652
    New Alternator Rotor - Not a rewind. 1980-1983 Yamaha XS650 No Core Required. For Yamaha TCI Type ignitions.   
  9. Basic High Output Standard Ignition/XSCharge PMA Package
    Part #
    24-2670
    XSCharge PMA and Basic High Output Standard Ignition packageFits all 1970-84 XS650's. Kit contains one 24-2669 XSCharge PMA unit (200 Watt) and one Basic High Output Standard Ignition kit . XSCharge Permanent Magnet Alternator Kit (PMA) built specially for the Yamaha XS650.Replaces your old rotor that has failed or mag... 
  10. Complete High Output Standard Ignition/XSCharge PMA Package
    Part #
    24-2671
    Complete High Output Standard Ignition/XSCharge PMA PackageFits all 1970-84 XS650's. Kit contains one 24-2669 XSCharge PMA unit (200 Watt) and the Complete High Output Standard Ignition unit. XSCharge Permanent Magnet Alternator Kit (PMA) built specially for the Yamaha XS650.Replaces your old rotor that has failed or m... 
  11. WM 2.5x18x36 spoke motorcycle rim Yamaha XS650
    Part #
    34-0007
    WM 2.5x18x36 hole Rim, polished aluminum.Very hard to find new. Classic 36 hole pattern will work with many vintage bikes. Works with XS650, XS400.This is a quality rim comparable to what you see on other sites for much more money.Great for chopper and bobber projects.DOT approved. 
  12. H 2.15x18 36 spoke shouldered aluminum motorcycle rim Black
    Part #
    34-3182
    H 2.15x18 36 hole shouldered aluminum rim BlackHard to find. Works with XS650, XS400 36 spoke hubs. Classic 36 spoke pattern works with other vintage bikes but we cannot guarantee which. This is a quality rim comparable to what you see on other sites for much more money.Dot approved.Great for chopper, bobber and rat... 
  13. Clutch Repair Kit XS650
    Part #
    39-6600
    Clutch Repair Kit - save over buying separately. Includes:6 Steel friction plates (39-6507)7 Friction plates (39-1133)1 Tab lock washer (39-6512)1 Clutch cover gasket (18-0864)1 Oil filter cover gasket (18-0856)1 Set of clutch springs (39-6506)Other items to consider purchasing separately for your clutch repair dependi... 
  14. Carb Holder Set XS400
    Part #
    40-4850
    Carburetor Holder Set with gaskets for stock XS400 1977-81.Replaces hardened and cracked carb holders.OEM reference numbers 2A2-13586-00-00 LH 2A2-13596-00-00 RH 1L9-13556-10-00 intake manifold gaskets 
  15. XS Performance Carb kit XS650 **ASSEMBLED**
    Part #
    48-9000
    XS Performance Carb XS650! ** ASSEMBLED KIT **Here is your option to buy a completely Assembled Kit.Please check Item # 48-9001 for Unassembled Kit with all the parts listed if you prefer to do it yourself.Our Carbs were Dyno tested and tuned for XS650's.A replacement for the 1980 to 84 stock Mikuni BS34 Carbs or your... 
  16. XS Performance Carb XS650 ** UNASSEMBLED KIT **
    Part #
    48-9001
    XS Performance Carb XS650! ** UNASSEMBLED KIT **32mm Flatslide Carb Set - Includes: Right & Left Carbs, Manifold Gaskets (#18-0865), Carb holder screws (#49-0741), 2 into 1 Throttle Cable (#48-9046), Billet Aluminum Intake Manifolds, Rubber Hose, 49mm Band clamp (#15-0685), 67mm Band Clamps (#15-0686), Fuel Line Fi... 
  17. XS Performance Carb XS400 ASSEMBLED
    Part #
    48-9004
    XS Performance Carb XS400 ASSEMBLED KITKit include:Right & Left Carbs, Manifold Gaskets (#18-0865), Carb holder screws (#49-0741), 2 into 1 Throttle Cable (#48-9046), Billet Aluminum Intake Manifolds, Rubber Hose, 49mm Band clamp (#15-0685), 67mm Band Clamps (#15-0686), Fuel Line Filter (#20-0013) and Air Filters (... 
  18. Capacitor Kit for XS650 PMA Charging System
    Part #
    61-1010
    Battery Eliminator Capacitor Kit for XS650 PMA Charging SystemUse this capacitor in place of your battery when installing our XSCharge PMA kit for Yamaha XS650. This will convert your bike to a battery-less charging system with kick only starting.Dimensions: 2" x 3-5/8 NOTE:Designed for use with XSCharge PMA charging s... 
  19. XSCharge Permanent Magnet Alternator Kit (PMA) 200 Watt
    Part #
    24-2669
    XSCharge Permanent Magnet Alternator Kit (PMA) with 200 Watt stator built specially for the Yamaha XS650.Replaces your old rotor that has failed or magnet that has weakened over time. Replaces regulator/rectifier with solid state electronics.Specifically built for the XS650. Fits 1970-79 XS650 with OEM points ignition... 
  20. Exhaust Pipe Gasket Yamaha XS400 XS750 XS850 XS1100
    Part #
    43-1875
    Exhaust Pipe Gasket. XS400/750/850/1100. Sold EACH. Need one for each cylinder, so 2 for XS400, 3 for XS750/850, and 4 for XS1100. 
  21. Footrest Rubber XS650 77-84, Flat Metal
    Part #
    02-2600
    Footrest Rubber XS650 77-84, Flat metal bottom type.Fits: 1977-84 XS650's, XS400.Sold each 
  22. 5th. Overdrive Gear for Yamaha XS650(73-84), Main shaft 0.979mm ONLY
    Part #
    05-0869
    5th. Overdrive Gear for Yamaha XS650(73-84), Main shaft 0.979 mm ONLY 0.984 inches or 25 mm (Hole diameter)24 Tooth 5th. Pinion Gear. Replaces 23T 5th.Pinion GearGear fits to stock location and makes fifth gear taller (higher top speed in fifth but less torque and less vibration) but ratios in lower gears remains the s... 
  23. Magura 13mm Brake Master Cylinder
    Part #
    08-0253
    Magura 13mm Brake (RH) Master Cylinder. Genuine Magura, made in Germany.Replaces original types on single disc brakes Yamaha XS650 1977-84, Standard and Special.Compact lightweight design, complete with brake switch, matching 10 x 1.0 Banjo Bolt and banjo bolt washers (2pc.) Ideal for street tracker or custom build use... 
  24. Electronic Advancer for the Pamco Hall effect Ignition
    Part #
    14-0648
    Electronic advancer for the PAMCO Hall effect ignition!Now you can eliminate that troublesome mechanical advancer and replace it with a reliable MCU* electronic advancer. -Precise lookup table for advance degrees / RPM-Automatic kill switch keeps coil off until starting-Eliminates advancer jiggle for a smoother engine... 
  25. Forward Controls Kit TC Bros Choppers
    Part #
    19-0401
    Forward Controls Kit, with knurled pegs for Yamaha XS650.See universal linkage kit 19-0402.Chopper and bobber projects. 
  26. Weld on hardtail TC Bros Choppers XS650
    Part #
    19-0405
    Weld on rigid hard tail frame section. Uses stock wheel, tire, spacers, and chain adjusters. Constructed of 1 1/8" diameter steel tubing with .120" wall thickness. The 1 1/8" diameter is also the same as the stock XS650 frame tubing for a nice install that looks factory made. The axle plates are cut from 3/8" thick... 
  27. Builder Exhaust kit TC Bros Choppers XS650
    Part #
    19-0420
    Builder Exhaust kit, 1.5" diameter. Do it yourself exhaust kit for all years of the XS650. Kit includes 2 flanges and collars to fit the stock XS650 head, 2 mandrel bent 90 degree pieces, 2 mandrel bent 180 degree pieces and 2 straight length pieces. Tubing is 1.5" diameter 16 gauge mild steel. Flanges are 1/4" thi... 
  28. Custom Stainless Braided Brakeline Kit TC Bros Choppers
    Part #
    19-0421
    Custom Stainless Braided Brakeline Kit TC Bros Choppers. 5 ft Brake line with two reusable 10 mm banjo fittings.Maxim operating pressure is 2500 PSI Easily cut to length to fit your application.Instruction included. 
  29. XS650 Billet Aluminum Intake Manifolds TC Bros Choppers
    Part #
    19-0460
    TC Bros XS650 Billet Aluminum Intake Manifolds Get rid of your cracked and leaking rubber intake manifolds and replace them with our super trick CNC machined billet aluminum racing intakes. These are very sturdy and improve flow to your motor. They are perfect when installing aftermarket carbs. Your stock rubber intake... 
  30. Fuel Petcock Repair Kit 1979-83 XS650 and more
    Part #
    20-0100
    Kit contains o rings and diaphragms to rebuild one fuel petcock. Does not include plastic diaphragm spacer block.Yamaha XS650 F, 2F, G, H, Special II, Heritage, 78-83.XS400 E, F, 2F, G, H, 78-81, SG/SH Special 80-81 XJ700 N/NC/S Maxim 85-86 XS750 SE after frame 311211 78, XS750SF 79, XS850 80-81 XJ900 83-85 XJ900R SEC... 
  31. XSCharge PMA Rectifier/Voltage Regulator Replacement
    Part #
    24-2088
    Voltage Regulator/Rectifier Replacement Regulator/Rectifier for the XSCharge Permanent Magnet Alternator (PMA #24-2669)Comes with a quick connector pigtail on the battery side for quick disconnect when needed. 
  32. Complete 277 Degree Rephase Ignition+Advance/XSCharge PMA Package
    Part #
    24-2606
    Complete 277 Degree Rephase Ignition+Advance/XSCharge PMA Package Kit contains:One XSCharge PMA unit (200 Watt) #24-2669 and one Complete 277 Degree Rephase Electronic kit.Note: This 277 Ignition system is for XS650 engines that have had the Camshaft and Crankshaft Rephased to reduce vibration. It will Not work on a re... 
  33. Ultimate High Output Ignition+ E-Advancer/PMA Package
    Part #
    24-2613
    XSCharge PMA and High Output Ignition+ E-Advancer Package Kit contains:One XSCharge PMA unit (200 Watt) #24-2669 and one Ultimate High Output Ignition Kit + New Electronic Advancer Save money as a kit Installation Instructions 
  34. Basic Standard Ignition Kit /XSCharge PMA Package
    Part #
    24-2672
    XSCharge PMA with Basic Standard Ignition Kit Package.Fits: All 1970-84 XS650's Now you can get the basic standard Ignition Kit, a proven reliable electronic trigger system that replaces the stock XS650 breaker point type ignition, with XSCharge The Permanent Magnet Alternator Kit (PMA,#24-2669) built specially for the... 
  35. Front Wheel Bearing Kit XS650 RD350 RD400 SR500 TX650 XS750 XS850 XS1100 + more
    Part #
    28-6306
    Front Wheel Bearing Kit Includes: (2) 6303-2RS Nachi ball bearing (with synthetic shields), (1) Front wheel Oil Seal - (SD-28-47-7), (1) Front Wheel Oil Seal - Speedo drive side - (SDO-45-56-6)Made in Japan - Highest Quality - make sure any you are comparing are made in Japan and same quality.Fits:RD350 A/B 1973-75, RD... 
  36. Rear Wheel Bearing Kit
    Part #
    28-6307
    Rear Wheel Bearing KitIncludes: (1)Rear Wheel Bearing - 6304 2RS Nachi ball bearing (with 2 synthetic shields), (1) Rear Wheel Bearing - 6305 2RS Nachi ball bearing (with 2 synthetic shields), (1) Rear wheel Oil Seal - (SO-27-52-5), (1) Rear wheel Oil Seal - (SD-35-62-9)Made in Japan - Highest Quality - make sure any y... 
  37. WM 2.5x18x36 spoke Black motorcycle rim, aluminum.
    Part #
    34-3185
    WM 2.5x18x36 hole Black rim, aluminum.Very hard to find new. Classic 36 hole pattern will work with many vintage bikes. Works with XS650, XS400. This is a quality rim comparable to what you see on other sites for much more money.Great for chopper, bobber and rat bike projects.DOT approved. 
  38. Tire Valve Core Tool
    Part #
    35-0056
    Tire Valve Core Tool (Set of 2)For installation and removal of standard valve cores Aluminum handle. 5-1/2" Long 
  39. Brass Carb Float - BS34 CV - XS400 XS500 XS650 XS750 XS1100
    Part #
    40-4830
    Carb Float . XS400 1977-79, XS500 1978, XS750 1978-79, XS1100 1978-79.  Includes float and pin 
  40. Float Needle Valve Assembly - Yamaha RD250 - RD350 - RD400 - XS1B
    Part #
    44-4810
    Float Needle Valve Assembly . Equivalent to OEM: 16030-017 16030-019 16030-025 23L-14107-25-002.5 Float Needle Valve Assembly found on Mikuni VM24- VM26 and VM28 carbs Fits Kawasaki Z1 KZ900 KZ1000 (77-80) KZ650 (77-81) Fits Yamaha TA-125, RD250 1973-75, RD350 1973-75 (OEM ), RD400 76-79, XS1B 1971... 
  41. Clip - Sidecover Emblem
    Part #
    99-3001
    Sidecover Emblem Clip- Used to hold emblem to cover.  Sold inidividually.   
  42. H 2.15x18 36 spoke shouldered aluminum motorcycle rim Yamaha XS400 XS650
    Part #
    34-1902
    H 2.15x18 36 hole shouldered polished aluminum rim. Very hard to find. Classic 36 hole pattern will work with many vintage bikes. Works with XS650, XS400. This is a quality rim comparable to what you see on other sites for much more money. Great for chopper, bobber projects. OEM reference number 94421-18146-00 for refe... 
  43. Carb Repair Kit XS400 XS750 XS1100
    Part #
    40-4805
    Carburetor Repair Kit. XS360 - XS400 1979, XS750 E/F/SF/SE 1977-79, XS1100 /SE 1978-1979 Kit includes float needle assembly, chamber gasket and 1 brass O ring.Note: Kit for 1 Carb. 
  44. Carb Float Valve (Needle & Seat) Mukuni BS38 CV carbs
    Part #
    48-5019
    Carb Float Valve (Needle & Seat) - threaded type. Fits: XS2 (1972), TX650/A (1973-74), XS650B-F (1975-79) with stock Mikuni BS38 CV CarburetorsAlso fits:RD250 (DS6) and RD350 (R5) 70-72 OEM 168-14190-20-00, XS500 C/D 76-77, TX750A 73-74, XS1100 78-79 
  45. Hugh's Handbuilt XS650 Lower Motor Mount Kit (XS650 1974 and Up)
    Part #
    19-0512
    Hugh's Yamaha XS650 Lower Motor Mount Kit. 1974 and Up! HHB Tested and Approved Laser Cut, Fully TIG Welded 1018 Steel Internally Threaded Front MountAll Hardware Provided. No more rusty OEM hardwareComplete Set of Front and Rear MountsDesigned and Manufactured in House from 1018 Steel, these new XS650 Motor Mounts are... 
  46. Universal Throttle Assembly with vintage style grip
    Part #
    02-2466
    7/8" Universal Throttle Assembly with vintage style grip. Works with XS650 stock cables and also most Triumph, BSA, Yamaha and Honda with 7/8" handlebars. Single pull throttle years only. Includes throttle assembly with grip and left hand grip.For the XS650 the adjuster nut at the base of the housing needs to be remove... 
  47. Magura Throttle Assembly
    Part #
    02-2467
    Magura Throttle Assembly 
  48. Monza Traditional Shock set 365mm (14.4") Black body, chrome spring
    Part #
    06-3650
    Monza Traditional Shock set 365mm. Black body, chrome springs. 14.4".Longer length for custom projects.Yamaha, Suzuki, Kawasaki, Honda. 
View as List Grid

Items 1-48 of 244

Page
per page
Set Descending Direction