Free U.S Shipping over $100
or over $300 for international orders
exclusions apply*
Over 15 years in business
serving the yamaha community
Free Shipping / Easy Returns
within the contiguous U.S over $100
exclusions apply*
Largest supplier of xs parts
over 2000 parts in stock / ready to ship

Honda CB SOHC Tools

View as List Grid

18 Items

per page
Set Descending Direction
  1. Threadlock - ThreeBond - Blue - 1342 - Low Strength
    Part #
    35-0200
    Inhibits rust, leaks, and corrosion. Not affected by oils, chemicals, solvents, etc. Low strength: frequent removal. 
    • Out of stock
  2. Feeler Gauges .004 .005 inch (1)
    Part #
    200-1708
    Tappet Feeler Gauges - .004 - .005 inch - Individual Allows accurate tappet adjustments Angled blade for easy access to tappets Makes valve adjustments quick and easy Made in the U.S.A. 
  3. Feeler Gauges .002 .003 inch (1)
    Part #
    200-1707
    Tappet Feeler Gauges - .002 - .003 inch - Individual Allows accurate tappet adjustments Angled blade for easy access to tappets Makes valve adjustments quick and easy Made in the U.S.A. 
  4. Feeler Gauges .006 .008 inch (1)
    Part #
    200-1709
    Tappet Feeler Gauges - .006 - .008 inch - Individual Allows accurate tappet adjustments Angled blade for easy access to tappets Makes valve adjustments quick and easy Made in the U.S.A. 
  5. JIS Screwdrivers - Set of Three #1- #2- #3
    Part #
    JF002
    Set of three high quality JIS Screwdrivers - Chrome Vanadium with Magnetic tips. Guaranteed for life. #1- #2 & #3 sizes. "full tang" - meaning that they are a one piece shaft from tip to tip with a hex bolster end. Every screw on every Japanese designed motorcycle from the 1950s right up to the newest bikes in th... 
  6. Internal Circlip Pliers Motion Pro
    Part #
    200-1700
    Allows removal of internal snap rings used in hydraulic master cylinders Replaces Honda# 07914-SA50001 Can be used to remove and replace small to medium internal snap rings up to 50 deep- including those used for transmission gear locating- bearing retention- and oil seal retention Applicable to some fork seal retainin... 
  7. Auxiliary Gas Tank
    Part #
    200-1702
    This impact resistant graduated tank takes the place of the original gas tank while performing carb synchronizing. Includes four feet of 1/4" fuel line and an inline brass petcock. Suggestion: look for a used hospital or doctors office IV stand.  These come with 4 or 5 wheels on a weighted base, telescoping stand... 
  8. Engine Stand metric MC25
    Part #
    KL37-9352
    MC25 This versatile stand is easily adjustable to accommodate the wide range of engine types in service today. Height and width are both adjustable on the MC25- another major feature is the ability to rotate an engine a full 360 degrees. Pan removal- transmissions- starters- and clutches are just a few of the services... 
    • Out of stock
  9. Seal Puller Adjustable
    Part #
    200-1703
    Adjustable oil seal puller with two tips- Head adjusts to 5 positions works well removing fork seals and other deep set seals. No more battling trying to remove stubborn seals - those hard to reach fork seals are no match for this tool 
  10. Wire Spike Cleaner Set
    Part #
    200-1704
    Useful tool for cleaning carb and carb jet orifices, master cylinder return holes, welder tips- etc. Assortment of different gauge wire tips. 
  11. Battery Charger - 12 Volt - Deluxe
    Part #
    42-3512
    Deluxe 12 Volt Battery Charger for AGM (Absorbed glass mat), Maintenance free,VRLA, Gel and conventional flooded lead acid batteries. UL & CSA Approved.Output is 1.25 Amps, 12 volt DC (maximum 14.5 Volts). 4 Stage Microprocessor controlled charging with automatic shutoff at full charge. 120v AC Input.1. Qualif... 
  12. Clutch and Sprocket Holding Tool - Lock Vise Type
    Part #
    35-9052
    Vise type tool will hold inner clutch hubs- gears- sprockets and flywheels (using pins opposite jaws side). Carbon Steel with heat treated jaws and nickel finsih. Max 130mm (5") jaw opening. Keywords: holder clamp grip 
  13. Continuity Tester
    Part #
    35-9008
    Electrical Continuity Tester (use with power off) - Detects open circuit in fuses,diodes, switches, sockets and wires (requires one AA battery - Not included).Long 48" leads. 
  14. Feeler Gauge Set - 0.04mm-1.0mm - 32 Blades
    Part #
    35-1769
    Feeler Gauge Set - Metric/Inch Feeler Gauge Set for setting valve and contact point clearances. 32pc. Set (marked in metric and inch sizes).0.03mm. - (.001") 0.04mm. - (.0015") 0.05mm. - (.002") 0.06mm. - (.0025")0.07mm. - (.0028") 0.08mm. - (.003") 0.09mm. - (.0035") 0.10mm. - (.004")0.13mm. - (... 
    • Out of stock
  15. 20pc. Feeler Gauge Set
    Part #
    35-1768
    Feeler Gauge Set- Metric Feeler Gauge Set for setting valve and contact point clearances. 20pc. Set (marked in metric sizes only).0.05mm. - (.002") 0.55mm. - (0.22")0.10mm. - (.004") 0.60mm. - (0.24")0.15mm. - (.006") 0.65mm. - (0.26")0.20mm. - (.008") 0.70mm. - (0.28")0.25mm. - (.010") 0.75mm. - (0.30"... 
  16. Feeler Gauge Set - 0.04mm-0.30mm - 9 Blades
    Part #
    35-1766
    Feeler Gauge Set- Metric Feeler Gauge Set for setting valve clearances.9 pc. Set (marked in metric sizes only). 0.04mm. - (.0015")0.05mm. - (.002")0.06mm. - (.0025")0.07mm. - (.0028")0.08mm. - (.003")0.10mm. - (.004")0.15mm. - (.006")0.20mm. - (.008")0.30mm. - (.012") 
  17. Threadlock - ThreeBond - Red - 1333B - Medium Strength
    Part #
    35-0201
    Inhibits rust, leaks, and corrosion. Not affected by oils, chemicals, solvents, etc. Medium strength: bearing and stud. 
  18. Chain Rivet & Breaker Tool - Heavy-Duty
    Part #
    TU15-8135
    Motion Pro Heavy-Duty chain breaker. Designed to break 520 to 630 chain. This tool will rivet 520 to 530 chain.View Technical Documentation 
View as List Grid

18 Items

per page
Set Descending Direction