Suspension

Suspension

Your motorcycle suspension is very crucial. No one likes a rough ride, so inspections and parts replacement should be done on worn-out parts to make sure your ride is safe and smooth.

If you are trying to get your motorcycle performing at its best, we have a large variety of Suspension parts for you to choose from across many top brands such as Monza, Hugh’s Handbuilt and MikesXS products.  Be sure to check out our selection of: Shock absorbers, Fork tubes, Fork seals, Springs, Swing arm bushings, Steering bearings, and Dampers.

View as List Grid

Items 1-48 of 85

Page
per page
Set Descending Direction
  1. 34mm Fork Tube Caps for 1970-72 XS1 XS1b XS2
    Part #
    27-4000
    Fork Tube Caps - Set/2 - Stock Chromed Steel OEM type Caps Fit: 34mm fork tubes on - XS1/XS1b/XS2 (1970-72)OEM Ref. 256-23111-60-00Caution! Fine thread, use care when installing. 
  2. Steering Stem Bearing Kit XS650 + more
    Part #
    28-2009
    Steering Stem (Head) Bearing Kit Kit replaces factory loose ball bearings & races. Tapered Roller bearings have 10 times the contact area and less flex. Drop in replacement for factory original type. Japanese made Superior Quality.Fits: 1970-84 XS1 XS2 XS650 TX650Also fits: FZ400R 92-93, TX500A 73-74, XS500 B-E 75... 
  3. Alloy Bracket for 35mm fork tubes
    Part #
    28-4001
    Alloy Bracket - For Fork tube end of our Hydraulic Steering Damper.Fits: 35mm. Fork tubes on Yamaha XS650's (1977-84). Made in Japan Bikes with standard 35mm forks: XS400 Maxim 82-83, SR500 E/F/G/H 78-81, XS500 C/D/E 76-78, XJ550 RH/RJ/RK Seca 81-83, XZ550 RJ/RK Vision 82-83, TX750 A 73-74, XS750.Will work with Yamaha... 
  4. Hydraulic Steering Damper
    Part #
    28-4008
    Hydraulic Steering Damper - 7 position adjustable in 20Lb. force increments. Quality Made in Japan. Ideal for sidecar or racing use. Frame bracket must be fabricated to adapt to your application. 
  5. Alloy Bracket for 34mm fork tubes
    Part #
    28-4014
    Alloy Bracket - For Fork tube end of our Hydraulic Steering Damper.Fits: 34mm. Fork tubes on Yamaha XS/TX650's (1971-76). Made in Japan.Bikes with standard 34mm fork tubes: R5, DS7 1970-72, RD350 73-75, TX500 73-75, XS500 73-75, XS1, XS1b, XS2, TX650 1970-73.Please note that we find the forks have been changed on some... 
  6. Blind Bearing and Bushing Removal Set
    Part #
    35-1066
    Blind Bearing and Bushing Removal Set. Set includes slide hammer, crossbar type shaft and 30, 25, 20, 17, 15, 12, 10 and 8mm collets.Essential tool for transmission rebuilds, also used for wheel bearing removal. 
  7. 22mm. Fork Cap Wrench
    Part #
    35-1076
    22mm. 12 Point Fork Cap Wrench. Removes alloy fork Tube Caps.Fits: TX650 (1973), XS650 (1978-84). 
  8. Fork Cap Box Wrench
    Part #
    35-1080
    32mm. 6 point Box Wrench - chrome plated steel. Also has 39mm. size. Fits fork cap for 70-72. Also some clutches. 
  9. Fork Tube Cap Tool
    Part #
    35-1081
    17mm. Hex (Allen) bit Tool to remove fork tube top caps.Fits: Fork caps on TX650A (1974), XS650BC (75-76) and 1977D (version without preload adjuster).A perfect fit to remove those soft alloy fork tube caps without damage. 
  10. Swing arm bolt Grease Fitting
    Part #
    28-1026
    Swing arm bolt Grease Fitting - Replace original grease fittings with ones that fit to common American size grease guns. Fittings fit to ends of swing arm shaft (bolt). 2 required per bike. Fits: All 650's 1970-84Also fits Center Stand Bolt XS650 item #37-0001 
  11. Swingarm Grease Seal Set
    Part #
    28-1025
    Swingarm Grease Seal Set - Holds grease into bushings & shaft area of swing arm. Helps seal out water & dirt. If your bike has originals they should be re-placed! ( 20+ years). Made in Japan by original supplier. Fits: All 650's 1970-1984 
  12. Bronze Swingarm Bushings XS1 XS2 XS650 XS360 XS400 XS500 TX650 TX750
    Part #
    28-1024
    Bronze Swing arm Bushings (Set/2) - Replace your plastic factory swing arm bushings and improve your bikes handling. A first Must Do for All XS650's Set Fits: All 1970-84 650'sAlso fits:XS360 D/2D 1977 XS400 1977-80 XS500. TX500, TX650, TX750 
  13. 34mm Fork Tube Caps 1974-76 XS650
    Part #
    27-4002
    Fork Tube Caps - Set/2 - Stock Aluminum OEM type Caps Fit: 34mm. fork tubes on TX650A (1974) & XS650B/C (1975-76).Replaces OEM # 341-23111-50/51Note: Use Fork Cap Tool (17mm. Hex) #35-1081 to remove or install.Caution! Fine thread, use care when installing. 
  14. 35mm Fork Tube Caps 1977-84 XS650
    Part #
    27-4003
    Fork Tube Caps - Set/2 - Stock Steel OEM type - Flat bottom no preload adjuster.Caps Fit: 35mm. fork tubes on XS650D (1977) and also fit to all 1978-84 fork tubes Recommended type for 77-84 models using our 27-1088 progressive type fork springs and/or our fork damper valves #27-1086.OEM Ref.# 1T3-23111-50-00Note: Use... 
  15. 35mm Fork Tube Caps 1977-84 XS650
    Part #
    27-4004
    Fork Tube Caps - Set/2 - Stock Aluminum type but with No preload adjuster.Caps Fit: 35mm. fork tubes on XS650's 1977-84. Replaces troublesome adjustable US model Cap used on 1978-84 650'sNote: Adjustable caps were never used on 650's outside of North America.22mm. Hex top Caution! Fine thread, use care when installin... 
  16. Fork Cap O-Rings 34mm forks 1970-76 XS1 XS2 XS650 TX650
    Part #
    27-5000
    Fork Tube Cap O-Rings (Pk/2) for 34mm. Forks Fits: XS1/XS1b/XS2/TX650/TX650A/XS650B/XS650C (1970-76) 
  17. Fork Cap O-Rings for 35mm forks
    Part #
    27-5001
    Fork Tube Cap O-Ring (Pk/2) for 35mm. Forks Fits: All XS650's 1977-84 
  18. Swing arm Needle Bearing Conversion Kit XS650 RD350 RD400 XS400
    Part #
    28-1011
    Swing arm Needle Bearing Conversion Kit - Kit includes - Needle Bearings & Hardened shaft. Fits: XS/TX650's 1974-84 - Made in Japan.The needle bearings replace the original plastic bushings. Some bikes may have replacement bronze bushings. You do not need those in addition to this kit.Also fits:RD250 73-75, RD350 A... 
  19. Replacement Needle Shaft Bearing
    Part #
    28-1020
    Replacement shaft Needle Bearing for #28-1011 conversion kit 
  20. Replacement Shaft End Bearing
    Part #
    28-1021
    Replacement Shaft End Bearing (Needle thrust washer) for kit #28-1011 
  21. Fork Oil Level Gauge
    Part #
    35-1084
    Fork Oil Level Gauge for adjusting the oil level on all XS650 forks.Adjustable ring measures oil levels from 0-300mm. in 50mm. increments.60ml. capacity syringe adjusts fluid levels. 
  22. Graduated Cylinder
    Part #
    35-2210
    250cc (1/4 Liter) plastic Graduated Cylinder for accurate measuring of fork oil and other fluids. 
  23. Steering Head Locknut
    Part #
    49-0750
    Steering Head Locknut. Fits: 74-84 XS650's Replaces OEM # 90179-25033 
  24. Chrome Steering Head Nut & Washer XS650
    Part #
    49-0752
    Steering Head Bolt with domed head and matching chrome radiused Washer.Fits: All XS650's with a steering head post Bolt (not models with a damper).Improved appearance over stock style. 
  25. Footrest Mount Acorn Nut - 10 x 1.25 (Crown Nut)
    Part #
    49-0703
    Polished Chrome Shock Acorn Nut - Short Type (Crown Nut)17mm hex x 10mm 1.25 pitch x 16mm Long Fits: All Footrest mount bars 70-84 + Fender mount thru point on 76-78's. 
  26. Chrome Thick Washer
    Part #
    49-0704
    Chrome Thick Washer - 10mm. x 27mm. x 4.5mm. - Fits: All Footrest mount bars on 1970-84 650's and shock absorber top mount stud on 1974-79 650's. 
  27. Hugh's Handbuilt Lowering Kit  1"
    Part #
    19-0507
    Hugh's Yamaha XS650/SR500 1" Fork Lowering KitMachined Specifically for XS650 / SR500Fits 35mm Forks (late 1975 and newer on XS650)Lowers your front end, while maintaining proper valving and dampingEasily installed using basic hand toolsMachined from 6061 Aluminum and made specifically for the XS650s unusual internal d... 
  28. Hugh's Handbuilt Lowering Kit  2"
    Part #
    19-0508
    Hugh's Yamaha XS650/SR500 2" Fork Lowering KitMachined Specifically for XS650 / SR500Fits 35mm Forks (late 1975 and newer on XS650)Lowers your front end, while maintaining proper valving and dampingEasily installed using basic hand toolsMachined from 6061 Aluminum and made specifically for the XS650s unusual internal d... 
  29. Hugh's Handbuilt Lowering kit  3"
    Part #
    19-0509
    Hugh's Yamaha XS650/SR500 3" Fork Lowering KitMachined Specifically for XS650 / SR500Fits 35mm Forks (late 1975 and newer on XS650)Lowers your front end, while maintaining proper valving and dampingEasily installed using basic hand toolsMachined from 6061 Aluminum and made specifically for the XS650s unusual internal d... 
  30. Hugh's Handbuilt Fork Brace Black
    Part #
    19-0510
    Hugh's Yamaha XS650/SR500 Fork Brace BlackThis limited run is designed to work on the 19 inch front wheel and tire combo on OEM XS650s and SR500s with 35mm Forks. Early bikes with 34mm forks require a minor shaving of the mounting tabs on the forks, roughly 1mm. HHB Fork Braces are shipped with Stainless installation h... 
  31. Shock Mount Acorn/Crown Nut
    Part #
    49-0715
    Chrome Shock Acorn/Crown Nut - Deep Type 17mm hex x 10mm x 1.25 pitch x 21mm Long Fits: Shock absorber upper studs on 74-84 650's 
  32. Fork Seal set (2)  Yamaha RD400 1978-79 SR500 1978-93 XS650 1977-83 TX750 1973-74
    Part #
    44-2710
    Fork Seal set (2)Fits: RD400 1978-79, SR500 1978-93, XS650 1977-83, TX750 1973-74 
  33. Steering Bearing Set Yamaha XS750 XS850 XS1100
    Part #
    43-2800
    Steering Bearing Set. XS750 1977-80, XS850 1980-81, XS1100 1978-81Also fits: TZ250 F-J 79-82, WR250 Z 91-97, XT250 84, YZ250 77-95, YBR250 11, TT350 86-87, XT350 H 85-90, FZR400R 88-90, IT400 79, YZ400 77-79, IT425 80, IT465 81-82, YZ465 81, IT490 83-84, YZ490 82-90, XP500 T Max 03-07, XT550 82-83, FZR600 R 89-95, FZS6... 
  34. Graduated Cylinder
    Part #
    35-2211
    500cc (1/2 Liter) plastic Graduated Cylinder for accurate measuring of fork oil and other fluids. 
  35. Damper Bolt Driver
    Part #
    35-5022
    Damper Bolt Driver - Deep type damper bolt driver used to air impact recessed damper bolts from lower fork legs. 
  36. Shock Ring Wrench
    Part #
    35-5033
    Ring Wrench to adjust shock preload.Fits: Our 06-3601/07/08/21/27/41 & 47 shock sets and many other aftermarket shocks. 
  37. Fork Seal Kit XS360 XS400
    Part #
    40-2701
    Fork Seal Kit. Fits:XS400 D/E/2E/F/2F/G/H 1977-81, XS400 G/H Special 1980-81, XS400 2A2 1981-82 XS400 SG/SH/SJ Special XS400 SE 1981-82 XS360 C/D/2D 1976-77 
  38. Fork Seal Kit XS400 XS500 XS750
    Part #
    40-2702
    Fork Seal Kit (35x48x11mm)Fits:RZ350 L/N/NC/NCII 1984-85 XS400 J/K Maxim 1982-83 XS400 RJ/RK SECA 1982-83 XS500 C/D/E 1976-78 XS750D 1977Honda: CB500 T 75-76, CB500 71-73, CB500 89-90, CB550 F 75-77, CB650 79-80, CB650 C 80-82, CB750A 76-78, CB750 F 79-80, CB450 70-74, CB 750 70, 72, CB750 K 74-82, CB 750 F 75-78, CB7... 
    • Out of stock
  39. Steering Stem Bearing RD250 RD350 RD400 XS360 XS400 +
    Part #
    40-2821
    Steering Stem Bearing KitFits:RD125 B/C 75-76, TZ125 G 1980, XV125 S 99, XV125 97-00 RD200 A/B/C 74-76, RD250 A/B 73-75 SR250 G/H/J Exciter 80-82 , SR250 TH Exciter II 1981 , SRX250 T/TC 1987 TD3/TR3 250 (Race) 1972, TZ250 (Race) 1973 XV250 U/UC/W/WC Route 66 88-89, XV250 A/AC Route 66 1990, XV250 G/GC-L/LC Route 66 95... 
  40. Fork Tube Bracket 33mm XS360 XS400
    Part #
    40-2841
    Fork Tube Bracket 33mm 
  41. Steering Bearing Set Yamaha SR500
    Part #
    41-2850
    Steering Bearing Set Yamaha SR500 
  42. Hugh's Handbuilt Fork Brace Raw
    Part #
    19-0511
    Hugh's Yamaha XS650/SR500 Fork Brace RawThis limited run is designed to work on the 19 inch front wheel and tire combo on OEM XS650s and SR500s with 35mm Forks. Early bikes with 34mm forks require a minor shaving of the mounting tabs on the forks, roughly 1mm. HHB Fork Braces are shipped with Stainless installation har... 
  43. 35mm + 6" Fork Tube Set  for 1977-84 XS650
    Part #
    27-3006
    Extended Fork Tube Set/2 (+ 6" over stock length).35mm OD Fit All 1977-84 650's. 
  44. Monza Shock Absorber Set - 13 3/16" (335mm) eye to eye 1974-84
    Part #
    06-3601
    Shock Absorber Set - (Monza Traditional) for 1974-84 XS/TX650's -Dual Progressive wound Chrome Springs & Long Black top shroud with black shock body.13 3/16" (335mm.) eye to eye, Includes preload wrench & set of eye rubbers.335mm is standard size for: Yamaha RD250 1973-75, RD350 1973-75, XS360 1976-77, TX650... 
  45. Shock Absorber Set - 13 3/16" (335mm) Monza Sport Red spring
    Part #
    06-3644
    Shock Absorber Set - (Monza Sport) for 1974-84 XS/TX650's -Dual Progressive wound Red Springs with Black shock body. No top cap or shroud.13 3/16" (335mm.) eye to eye., Includes preload wrench & set of eye rubbers.Custom projects or custom look. 
  46. Monza Sport Shock Absorber Set 12.75" (324mm) black w/chrome spring
    Part #
    06-3647
    Shock Absorber Set - (Monza Sport) for 1974-84 XS/TX650's -Dual progressive wound Chrome Springs & Chrome top shroud with Black shock body.12.75" (324mm.) eye to eye., Includes preload wrench & set of eye rubbers. 
  47. Monza Traditional Shock set 365mm (14.4") Black body, chrome spring
    Part #
    06-3650
    Monza Traditional Shock set 365mm. Black body, chrome springs. 14.4".Longer length for custom projects.Yamaha, Suzuki, Kawasaki, Honda. 
  48. Gas Shock Absorber Set 12.6" (320mm) Monza Cafe Orange springs
    Part #
    06-3720
    Gas Shock Absorber Set - (Monza Cafe) for 1974-84 XS/TX650's -Orange Springs & Silver body 12.6" (320mm.) eye to eye. Top eye 14.2mm Dia., Bottom eye 10.2mm. Dia. Top Quality** Please see note on shaft about pressure and disassembling. 
View as List Grid

Items 1-48 of 85

Page
per page
Set Descending Direction