Tools & Manuals

Tools & Manuals

The right tool for the right job is not just a few words to be taken lightly. Motorcycle manufacturers have designed special tools for specific tasks. This confirms the importance of owning and using the correct tool for your repairs. To assist with repairs are a great addition to your tool collection. Most Manuals provide specific technical information along with pictorial step by step procedures.

If you are trying to get your motorcycle performing at its best, we have a large variety of Tools & Manuals for you to choose from across many top brands such as Autosol, Three Bond, and MikesXS products.  Be sure to check out our selection of: {list of the sub-category items} Service tools, Maintenance products and manuals.    

View as List Grid

Items 1-48 of 129

Page
per page
Set Descending Direction
  1. Manual XJ900F Fours (83 94)
    Part #
    HAM3239
    Hard-Cover Haynes comprehensive shop manual for service- repair and maintenance on the Yamaha XJ900F Fours (83 - 94) 4-cylinder motorcycles. Hardcover book contains hundreds of photographs and illustrations 
  2. Manual XJ650 & 750 Fours (80 84)
    Part #
    HAM738
    Soft-Cover Haynes comprehensive shop manual for service- repair and maintenance on the XJ650 & 750 Fours (80 - 84) 4-cylinder motorcycles. Softcover book contains hundreds of photographs and illustrations 
    • Out of stock
  3. JIS Screwdrivers - Set of Three #1- #2- #3
    Part #
    JF001
    Set of three high quality JIS Screwdrivers. Guaranteed for life. #1- #2 & #3 sizes.Every screw on every Japanese designed motorcycle from the 1950s right up to the newest bikes in the showroom today were manufactured with a unique JIS screw head design we dont see on products made here in North America. JIS stands f... 
  4. Float Level Gauge - XS650 w/etching
    Part #
    35-1400
    Precise tool accuracy.  Float Level Gauge - XS650 w/etching 
  5. Autosol Metal Polish
    Part #
    05-9004
    3.33 oz. (75 ml) tube of Autosol Metal Polish.Cleans, polishes, protects and removes corrosion.For all metal parts-chrome, brass, copper, nickel,stainless steel & aluminum.Made in Germany since 1929."A product that is superior to anything else available" 
  6. Stainless Steel Zip Ties for Header Wrap TC Bros Choppers
    Part #
    19-0415
    Stainless Steel Zip Ties for Header Wrap TC Bros Choppers Set/4(2" Max Diameter)Used at the ends of header wrap to secure it. For a cleaner looking than using hose clamps. 
  7. 50ft Black Header Wrap 2" wide TC Bros Choppers
    Part #
    19-0427
    Black Fiberglass Exhaust Header Wrap, 2" wide, 1/16" thick, 50 ft roll.50 ft is recommended for dual pipes such as Yamaha XS650 exhausts.Use safety wire, stainless zip ties (#19-0415) or hose clamps at the ends of the wrap to secure it. 
  8. XS650 Engine Stand TC Bros Choppers
    Part #
    19-0430
    XS650 Engine Stand. Rigid and easily secured to your work bench using holes in the base of the stand. Powder coated gloss black. Makes engine rebuilds a lot easier. 
  9. Heavy Duty Tiedown Set
    Part #
    27-5503
    Heavy Duty Tiedown set - 1 inch Wide x 5 1/2FT. 4000 LB. Strength with Quick Release. - Set of 2 (Black Color) 
  10. Heavy Duty Tie Down Set
    Part #
    27-5580
    Long Heavy Duty Tiedown set - 1 inch Wide x 10FT.,4000 Lb. Strength with Quick Release. - Set of 2 (Black Color) 
  11. Motorcycle Drive Chain Riveter Tool
    Part #
    35-0006
    Drive Chain Riveter Tool - Rivets high strength rear drive chain Rivet links with hollow pin ends as on our IZUMI 530HT Chain ( Rivet link #56-0235 ) and many DID brand chains. 
  12. Replacement Rivet Pin
    Part #
    35-0007
    Drive Chain Rivet Tool Replacement Rivet Pin - Fits: 35-0006 
  13. Terminal Crimper Tool
    Part #
    35-0008
    Terminal Crimper Tool 
  14. External long arm snap ring pliers
    Part #
    35-0009
    External long arm snap ring pliers - Reaches in deep to remove clips when rebuilding master cylinders. 
  15. Alternator Rotor Puller for Yamaha XS650
    Part #
    35-0040
    Alternator Rotor Puller - Safely pulls rotor without damaging it. Size: M24 x P1.0Fits: All 650's. 
  16. Rotor Puller for Yamaha XS650
    Part #
    35-0041
    Rotor Puller Tool For Aftermarket XS650 PMA Charging System Kits Size: M27x1.0 LHFits: All XS650Note: Not for use on stock Yamaha rotor 
  17. Tire Valve Core Tool
    Part #
    35-0056
    Tire Valve Core Tool (Set of 2)For installation and removal of standard valve cores Aluminum handle. 5-1/2" Long 
  18. Valve Lapping Sticks
    Part #
    35-0059
    Valve Lapping Sticks - Set/2 
  19. Valve guide Install / remove driver tool Yamaha XS650
    Part #
    35-0077
    Valve guide Install / remove driver tool for 1970-84 650's 
  20. Tire Lever - 16" long Dunlop type
    Part #
    35-0080
    Tire Lever - 16" long Dunlop type - For those tough tires needing lots of leverage to remove. You need 2-3 of these to do the job! 
  21. Chain Press Tool
    Part #
    35-0081
    Chain Press Tool Used to press on sideplates (rivet or clip type) onto rear drive chains.Most late type High strength drive chains now use a press on sideplate on the connecting link ( including IZUMI 530 HT ). 
  22. Motorcycle Chain Alignment Tool
    Part #
    35-0082
    Chain Alignment Tool. Designed for quick and accurate alignment of the counter shaft and rear sprockets during chain adjustment or wheel installation. Clamps the square body to rear sprocket so the alignment rod will indicate sprocket alignment to chain when the indicator and the line on the body align. 
  23. Motorcycle Drive Chain Breaker Tool.
    Part #
    35-0083
    Drive Chain Breaker Tool. 
  24. Digital Tire Pressure Gauge
    Part #
    35-0089
    Digital Tire Pressure Gauge LCD Display. 1-100 PSI 
  25. Impact Screwdriver with bit set
    Part #
    35-0095
    Impact Screwdriver with bit set in case. A must have tool used to break loose engine screws with slot or phillips heads. This is a nice kit, there are cheap ones out there but you get what you pay for. 
  26. Replacement Driver Bit Set (1.5" Long)
    Part #
    35-0107
    Replacement Driver Bit Set (1.5" Long) - Set contains 2 Phillips & 2 Slotted impact driver Bits. 
  27. Motorcycle Spoke Wrench Set
    Part #
    35-0109
    Spoke Wrench Set - A must have for lacing, truing & tightening spokes.2 Pc. Set Fits: #8,9,10 & 11 nipple sizes. 
    • Out of stock
  28. Replacement Driver Bit Set ( 3" Long )
    Part #
    35-0110
    Replacement Driver Bit Set ( 3" Long ) Set contains 2 Phillips & 2 Slotted impact driver Bits. 
  29. Motorcycle Chain Breaker and Riveting Tool Kit
    Part #
    35-0111
    Chain Breaker and Riveting Tool Kit. Kit supplied with components to break chains from #35 to #630. It can be used on cam chains and drive chains. Contains: Handle, lever, spring, two press plates, large anvil and small anvil, HSS rivet tip for hollow nose master links, body, alignment bolt and push bolt, HSS 2.2mm... 
  30. Motorcycle Cam Chain Tool Kit
    Part #
    35-0112
    Cam Chain Tool Kit in case - a "must have" tool to Break and Rivet cam chains. Note: Do Not use for rear drive chains. Installation Instructions 
  31. Spring Puller Tool
    Part #
    35-0113
    Spring Puller Tool - Used to Pull Springs and Hook them into place 
  32. Snap ring Plier Set
    Part #
    35-0114
    Snap ring Pliers Set - Removes internal and external snap rings. Set includes 2 straight and 2 angled tips. 
  33. Motorcycle Valve Spring Compressor Tool
    Part #
    35-0115
    Valve Spring Compressor Tool in case High quality professional tool to remove valve springs.Now with 5 Tips! - 16, 19, 23, 25 & 30mm. Dia. 
  34. Engine Valve Seat Cutting/Finishing Tool Kit
    Part #
    35-0116
    Tool Kit for doing 3 angle Valve Seat Cutting & Finishing.Kit was created by Mikes XS specifically for overhauling the XS650 cylinder head.Works on All 1970-84 650 engines.Kit Contains:1 - Precision ground T-Handle Valve guide Pilot 1- 36 x 45 degree Carbide Cutter 1- 43 x 30 degree Carbide Cutter 1- 43 x 45 degree... 
  35. Replacement Breaker Pin
    Part #
    35-0117
    Replacement Breaker Pin for Cam chain breaker tool. 
  36. Replacement Valve Seat Grinding Stone
    Part #
    35-0118
    1- 36mm. Dia. x 45 Degree replacement Valve Seat Grinding stone for kit #36-0116 
  37. Replacement Valve Seat Grinding Stone
    Part #
    35-0119
    1- 42mm. Dia. x 45 Degree replacement Valve Seat Grinding stone for kit #36-0116 
  38. Permatex Valve Lapping Paste
    Part #
    35-0120
    Permatex Valve Lapping Paste 
  39. Rocker Shaft Slide Hammer
    Part #
    35-0121
    Slide Hammer with correct bolt thread to remove Engine Rocker Arm Shafts from head cover. Works on all 1970-84 XS650s. Easy to use. 7 in. Length with a 5.6mm Shaft diameter. 
  40. Motorcycle Valve Spring Compressor
    Part #
    35-0122
    Valve Spring Compressor - Large Honda heavy duty type.This style valve spring Compressor works best on the XS650. 
  41. Motorcycle Chain Puller Tool
    Part #
    35-0130
    Chain Puller Tool, Pulls new rear drive chain ends together so that the joiner link can be slipped in place. Ideal for new chains that are difficult to get together for the first time. 
  42. Spark Plug Gap Tool
    Part #
    35-0136
    Circular Spark plug gap tool. Marked in thousandths of an inch and millimeters. 
  43. Three Bond Thread Lock low strength
    Part #
    35-0200
    Inhibits rust, leaks, and corrosion. Not affected by oils, chemicals, solvents, etc. Low strength: frequent removal. 
  44. Three Bond Anaerobic Thread Lock - Medium Strength
    Part #
    35-0201
    Inhibits rust, leaks, and corrosion. Not affected by oils, chemicals, solvents, etc. Medium strength: bearing and stud. 
  45. Haynes Service Manual Yamaha XS650
    Part #
    35-0650
    "Haynes" Service Manual - covers XS650 1970-83.Clear instructions and hundreds of photographs to help you perform anything from simple maintenance to basic repairs. Includes: Routine maintenance, Tune-up procedures, Engine, Clutch and Transmission Repair, Fuel and Exhaust, Ignition and Electrical, Brakes and Wheels,... 
  46. Haynes Manual Yamaha SR500, XT500, TT500
    Part #
    35-0651
    Haynes Manual SR500, XT500, TT500, 1975 to 1981.Clear instructions and hundreds of photographs to help you perform anything from simple maintenance to basic repairs. Includes: Routine maintenance, Tune-up procedures, Engine, Clutch and Transmission Repair, Fuel and Exhaust, Ignition and Electrical, Brakes and Wheels,... 
  47. Haynes Manual Yamaha XS750 XS850
    Part #
    35-0652
    Haynes Manual XS750, XS850. Covers 1976 to 1981 models.Clear instructions and hundreds of photographs to help you perform anything from simple maintenance to basic repairs. Includes: Routine maintenance, Tune-up procedures, Engine, Clutch and Transmission Repair, Cooling system, Fuel and Exhaust, Ignition and Electr... 
  48. Clymer Manual Yamaha 650 Twins
    Part #
    35-0660
    Clymer Manual 650 Twins. Written specifically for the do-it-yourselfer, Clymer manuals provide the information you need about your motorcycle. Step by step procedures, detailed photography and exploded views, the manual is based on the complete disassembly of the motorcycle. Unlike OEM manuals, they are designed for... 
    • Out of stock
View as List Grid

Items 1-48 of 129

Page
per page
Set Descending Direction