Over 15 years in business
serving the yamaha community
Free Shipping / Easy Returns
within the contiguous U.S over $150
Largest supplier of xs parts
over 2000 parts in stock / ready to ship

Yamaha XS650 Ignition: Systems, Coils, Plugs, Switches and Hardware

Ignition: Systems, Coils, Plugs, Switches and Hardware

Once you’ve rephased the crank and crankshaft on your XS650 to smooth out vibration, be sure to install a 277-degree ignition and advance kit to complete the restoration. We also carry three levels of ignition permanent magnet alternator (PMA) kits from XSCharge. Install the ultimate kit and run your XS650 café racer as hot as it gets. Mikes XS is also a great source for resistor and non-resistor NGK spark plug caps, Yamaha XS condensers, ignition contact points or coils, ignition switches and everything else you need to renew your XS650 ignition.

View as List Grid

Items 1-48 of 69

Page
per page
Set Descending Direction
  1. Contact Point Yamaha XS1, XS650, TX750
    Part #
    14-0038
    Contact Point - (Order 2 for each XS engine) Fits:Yamaha XS/TX 650's Also fits: XS1/B 70-71, TX750 73-74Japanese made Superior Quality - Hitachi type OEM Ref.# 256-81621-11 
  2. XSCharge Permanent Magnet Alternator Kit (PMA) 200 Watt
    Part #
    24-2669
    XSCharge Permanent Magnet Alternator Kit (PMA) with 200 Watt stator built specially for the Yamaha XS650.Replaces your old rotor that has failed or magnet that has weakened over time. Replaces regulator/rectifier with solid state electronics.Specifically built for the XS650. Fits 1970-79 XS650 with OEM points ignition... 
  3. Complete High Output Standard Ignition/XSCharge PMA Package
    Part #
    24-2671
    Complete High Output Standard Ignition/XSCharge PMA PackageFits all 1970-84 XS650's. Kit contains one 24-2669 XSCharge PMA unit (200 Watt) and the Complete High Output Standard Ignition unit. XSCharge Permanent Magnet Alternator Kit (PMA) built specially for the Yamaha XS650.Replaces your old rotor that has failed or m... 
  4. Basic High Output Standard Ignition/XSCharge PMA Package
    Part #
    24-2670
    XSCharge PMA and Basic High Output Standard Ignition packageFits all 1970-84 XS650's. Kit contains one 24-2669 XSCharge PMA unit (200 Watt) and one Basic High Output Standard Ignition kit . XSCharge Permanent Magnet Alternator Kit (PMA) built specially for the Yamaha XS650.Replaces your old rotor that has failed or mag... 
  5. Ultimate Electronic Ignition with E-Advancer/XSCharge PMA Package
    Part #
    24-2607
    XSCharge PMA and Ultimate Electronic Ignition with E-Advancer Package Kit contains:One XSCharge PMA unit (200 Watt) #24-2669 and one Ultimate System Electronic Ignition with Electronic Advancer and Ignition Coil Kit Save money as a kit Installation Instructions 
  6. Basic Electronic Ignition with E-Advancer/XSCharge PMA Package
    Part #
    24-2605
    XSCharge PMA/Basic Electronic ignition Package Kit contains:One XSCharge PMA unit (200 Watt) #24-2669 and one Basic Electronic Ignition system with Electronic Advancer and Ignition Coil Save money as a kit. Installation Instructions 
  7. Ultimate High Output Ignition Coil
    Part #
    17-6903
    Ultimate High Output Replacement Coil. Replaces stock factory Tci ignition coils.12 Volt. Primary resistance 2.45 OHMs. Secondary resistance 15ak OHMs 6.6mm mounting holes spaced at 102mm mounting holes center to centerWarning: Serious High Voltage Possible Output as high as 82 KvCaution! Do not operate or apply powe... 
  8. Ignition Coil 4 Ohm primary original replacement type XS650 + more
    Part #
    17-6805
    Ignition Coil - Exact replacement original type coil for all XS650's with contact point ignitions. Replaces original coils that are weak from heat and age and restores spark strength to the ignition system. Hitachi type CM11-50/50B/52A 4 Ohm primary - 2 required per bike. Plug wires not included.OEM Ref.# 254-82310-60-... 
  9. Auto Advance Assy. with center disc
    Part #
    14-0652
    Auto Advance assembly mechanism. Complete advance as shown including cogged mounting Nut. Fits: All XS650's 1970-84 (contact point ignition assemblies).Replaces original units with worn or damaged parts. 
  10. NGK 14mm B8ES Spark Plug
    Part #
    TU38-0019
    OEM: 2411 -14mm thread. NGK plugs provide a reliable spark. If you need a hotter running plug select B7ES or a colder running plug select B9ES plugs. Used on Honda Twins CB500T CB450 (65-74) CL450 CB360 CJ360 CL360 CB350 CJ350 CL350 Kawasaki KZ1100 ZN1100 KZ1000 KZ900 Z1 KZ750 (4-cylinder) KZ700 ZN700 KZ250 (83) KZ20... 
  11. NGK Spark Plug BP7ES
    Part #
    50-6501
    NGK Spark Plug - BP7ES - Fits: TX650, TX650A, XS650B-K (1973-84), XS400, SR500, XS750, XV535, XV700, XV750, XV920, XV1000, XV1100 Virago 81-00, motorcycles 
  12. Condenser Pack all XS650
    Part #
    26-5114
    Condenser Pack - Fits: All 650's with point ignitions. One pack used per engine(located under top motor mount) - Japan OEM Quality OEM # 256-81625-10 
  13. Non-Resistor NGK Spark Plug Cap.
    Part #
    23-3114
    Non-Resistor NGK motorcycle Spark Plug Cap. Fits to spark plugs with threaded stud type terminal end. Recommended for Early model XS650's (points ignition).Works with XS400. 
  14. NGK Resistor Spark Plug Cap (5K Ohms)
    Part #
    23-3113
    NGK Resistor Spark Plug Cap (5K Ohms). This Factory Original XS650 type can be used with All electronic ignitions (spark plugs with threaded stud type terminal end).XS650 TX650 XS400 motorcycles 
  15. Auto Advance Spring & Clip Set XS650
    Part #
    14-0651
    Auto Advance Spring & Clip Set -Is your Ignition going to full advance at low RPM? This is the solution. Replacement Spring & Clip set replaces worn or broken stock parts & restores proper ignition timing advance rate. 
  16. Camshaft internal metal Bushing for advance rod.
    Part #
    05-0032
    Camshaft internal metal Bushing for advance rod. 2 Used per camshaft on 1970-79 XS1, XS2, XS650 models (Points Ignitions) and also required if using Boyer ignitions. Fits inside cam in center (one each side)Note: These are usually missing from 1980-84's. 
  17. Complete 277 Degree Rephase Ignition+Advance/XSCharge PMA Package
    Part #
    24-2606
    Complete 277 Degree Rephase Ignition+Advance/XSCharge PMA Package Kit contains:One XSCharge PMA unit (200 Watt) #24-2669 and one Complete 277 Degree Rephase Electronic kit.Note: This 277 Ignition system is for XS650 engines that have had the Camshaft and Crankshaft Rephased to reduce vibration. It will Not work on a re... 
  18. Ultimate High Output Ignition+ E-Advancer/PMA Package
    Part #
    24-2613
    XSCharge PMA and High Output Ignition+ E-Advancer Package Kit contains:One XSCharge PMA unit (200 Watt) #24-2669 and one Ultimate High Output Ignition Kit + New Electronic Advancer Save money as a kit Installation Instructions 
  19. Basic Standard Ignition Kit /XSCharge PMA Package
    Part #
    24-2672
    XSCharge PMA with Basic Standard Ignition Kit Package.Fits: All 1970-84 XS650's Now you can get the basic standard Ignition Kit, a proven reliable electronic trigger system that replaces the stock XS650 breaker point type ignition, with XSCharge The Permanent Magnet Alternator Kit (PMA,#24-2669) built specially for the... 
  20. Spark Plug Gap Tool
    Part #
    35-0136
    Circular Spark plug gap tool. Marked in thousandths of an inch and millimeters. 
  21. Chrome Point Cover Screw
    Part #
    49-0709
    Chrome Point Cover Screw 
  22. NGK Iridium Spark Plug BPR-7EIX
    Part #
    50-5944
    BPR7EIX - Fits: 73-84 650's - Adds a solid 2 HP to your 650NGK Iridium Spark Plugs - Cheapest horsepower you can buy for your XS!While Dyno testing a problem bike (a TX750) it was discovered that customer supplied Iridium spark plugs caused the engine to gain 2 HP. Further Dyno testing on other stock and modified 65... 
  23. NGK Resistor Spark Plug Cap (5K Ohms)
    Part #
    23-3117
    NGK Resistor Spark Plug Cap (5K Ohms). This 5k cap IS required when fitting Champion spark plugs (with Solid terminal end) to Boyer and Factory electronic ignitions. Fits to spark plug with threaded on or solid terminal end only.XS650 TX650 XS400 motorcycles 
  24. XS Performance Silicone Plug Wires
    Part #
    23-2906
    XS Performance 7mm. Silicone Spark Plug Wire Set (2pc.)Wire is 2 pc. at 20" each.Yellow Color with Copper Core. 
  25. Ignition Switch
    Part #
    12-4035
    Ignition Switch with Keys - OEM Ref. # 256-82508-30/31,366-82508-30Fits: Yamaha XS1/XS1b/XS2 (1970-72), 1970-72 R5, 1970-72 DS7, 1973 TX650 
  26. Advance Rod
    $43.94
    Part #
    14-0650
    Auto Advance Unit Rod with advance disc (Coupler to advance unit), nuts(2) and lock washers(2).Rod - OEM Ref.# 256-11156-00, locating pins - OEM Ref.# 93603-07073Note: Rod passes thru camshaft. Cam must have internal bushings - (these are usually missing on 1980-84 North American 650 models).Fits: All XS650 TX650's 1... 
  27. Advance Locating Pin
    Part #
    14-0653
    Locating Pin - Auto advance to camshaft, contact point cam and auto advance drive disc locating pins.OEM Ref. # 93603-07073 Yamaha XS650 
  28. 277 Degree Rephase Pamco Electronic Trigger Plate and rotor
    Part #
    14-0998
    277 Degree Rephase Ignition System by Pamco. Using the same proven design as the Standard PAMCO Hall effect ignition for the XS650, the 277 systems offer a solid state answer for the popular Rephased XS650 engine.When combined with the outstanding single output "Green Monster" coils, these systems will provide the powe... 
  29. High Output Replacement Ignition Coil 1.6Ohms TCI ignition
    Part #
    17-6803
    High Output Replacement Ignition Coil 1.6 Ohms - for 80-84 XS650's with Factory TCI ignition (dual lead - 1 used per bike ). Used on 80-84 models Only, and is Not for contact point systems. Mounts to stock brackets. Plug Wires not included. Not for use with Boyer Ignitions. Mount this coil to stock bracket on opposite... 
  30. Spark Plug High Tension Wires
    Part #
    23-2902
    7mm Spark Plug High Tension Wires- Original Type - Copper core with Black silicone rubber casing (1 Set).Works with XS400. Each wire is 21 inches in length. 
  31. Ignition Coil 4.5 Ohm single contact point type or Boyer
    Part #
    17-6822
    Dual Lead Ignition coil for use with single contact point type conversions or Early type Boyer Digital Ignitions. 12 Volt, 4.5 Ohm Primary Resistance, 102mm. c-c mounting points.Specs: Blue lead wire 6", black lead wire 10 3/4", spark plug wires 21" 
  32. NGK Resistor Spark Plug Cap (1K Ohms)
    Part #
    23-3116
    NGK Resistor motorcycle Spark Plug Cap (1K Ohms) for use with Champion projected nose Resistor spark plugs (with Solid terminal end). This Cap can be used with Factory electronic or point type ignitions (spark plugs with threaded on or solid terminal end only). 
  33. Alloy Engine Advance/points Cover Set
    Part #
    24-2772
    Polished Chrome Aluminum Cam End Cover Set (2) - Plain,No logo. Fits: All 650's 1970-1984. One cover for the advance side, one cover for the points side.CNC Machined - Polished Chrome finish (Plain, No logo) with chrome allen set screws for mounting included.Really adds to the looks of your engine! 
  34. Ignition Switch XS400 XS650 XS750 XS850 XS1100
    Part #
    43-1201
    Ignition SwitchFits: XS400 SE 1980-81, XS650 1980, XS750 1980-82, XS850 1980-81, XS1100 1978-82. 
  35. Advance/Breaker Housing Screw & washer Pk/6
    Part #
    49-0711
    Advance/Breaker Housing Screw & washer Pk/6 (12pcs) - 6 countersunk flat-head type screws and 6 matching starlock washers. 2 sets required to do both engine housings on each engine. Fits: All 650's 1970-84 
  36. Spark Plug  NGK - BPR7ES
    Part #
    50-6507
    Spark Plug NGK - BPR7ES - motorcycleResistor plug for radio interference. Used with caps without resistors. 
  37. NGK Iridium Spark Plug BPR-8EIX
    Part #
    50-6742
    BPR8EIX - Fits: Yamaha XS650 TX650 1970-1972 - Adds a solid 2 HP to your 650!NGK Iridium Spark Plugs - Cheapest horsepower you can buy for your XS!While Dyno testing a problem bike (a TX750) it was discovered that customer supplied Iridium spark plugs caused the engine to gain 2 HP. Further Dyno testing on other stoc... 
  38. NGK 14mm B7ES Spark Plug
    Part #
    TU38-0011
    OEM: 1111 - 14mm thread. NGK plugs provide a reliable spark. If you need a hotter running plug select B6ES or a colder running plug select B8ES plugs. Used on Kawasaki GPZ750 (82) KZ650 W1 W2 KZ440 KZ400 KZ250 (80-82)- Suzuki GT550 (72-74) GT380 (72-73) 
  39. XS Performance Ignition Coil 3.3 Ohm XS650 1980-84
    Part #
    17-6810
    Dual Tower XS Performance High Output Ignition Coil, 3.3 OHM Primary Resistance. 15K OHM Secondary Resistance. Capable of sustained 45KV output with 12.5v DC input. Capable of sustained 75KV output with 14v DC input. Replaces stock factory TCI ignition coils on All 1980 & up models and works with all our ignitions... 
  40. XS Performance Ignition Coil 3.3 Ohm
    Part #
    17-6807
    Single Tower XS Performance High Output Ignition Coil 3.3 OHM Primary Resistance. 15K OHM Secondary Resistance. Capable of sustained 45KV output with 12.5v DC input. Capable of sustained 75KV output with 14v DC input. Replaces stock contact point ignition coils on All 1970 & up XS650 models and works with 277 engin... 
  41. Contact Breaker Plate Assembly Lead
    Part #
    14-0777
    Contact Breaker Plate Assembly Lead 
  42. Camshaft internal metal Labyrinth Seal (Bushing) Yamaha XS650
    Part #
    05-0033
    Camshaft internal metal Labyrinth Seal (Bushing) for advance rod. 2 used per camshaft on 1970-79 XS1, XS2, XS650, TX650 models (Points ignitions) and also required if using Boyer ignitions. Fits inside of camshaft and flush with ends (one each side). Note: These are usually missing from 1980-84's. OEM Ref.# 256-11155-... 
  43. Camshaft internal cam needle Bearing Yamaha XS650
    Part #
    05-0034
    Camshaft internal cam needle Bearing - (Upgrade/replacement for #05-0032) Fits: All 650's 1970-84. Mounts flush with cam ends. 
  44. Ignition Switch with fork lock & keys
    Part #
    12-0057
    Ignition Switch with fork lock & keys - Fits: XS650 1978-84 Only !OEM Ref.# 2G2-82508-50Also works with XS400 81-83, SR250 Exciter 80-82, XV500 k Virago 83, XJ550 81-83, FJ600 84-85, XJ600 92-93, XJ650 Maxim 80-83, XJ650 Seco 82, XJ750 Maxim 83, XS750 78-79, XV750 Virago 82-83, XS850 Special 80-81, XJ900 Seca 83, X... 
  45. Boyer Bransden Micro Power Micro Digital Ignition System
    Part #
    12-0089
    Boyer Bransden Micro Power Micro Digital Ignition System - Features: Programmed digital advance curve, Low power draw, special high output coil (45KV). Replaces Points Ignition or Yamaha TCi systems. Fits: All XS/TX650's 1970-84. Includes all items shown. Coil mounting bracket will have to be fabricated. If you have... 
  46. Boyer Bransden Igniter Box
    Part #
    12-0090
    Igniter Box for Boyer Bransden Micro Power Micro Digital Ignition Kit(XS#12-0089). "not a complete kit"Note: Does Not fit early/other Boyer ignitions or any other types of Ignitions. 
  47. Ignition Switch
    Part #
    12-4036
    Ignition Switch with keys - Fits: XS650 1976-77 May adapt to other years.OEM Ref. #584-82508 (No fork lock on this type)Note: Yamaha has made various versions of this switch and all are sold under the same OEM part number. Ours does Not have a connector plug but wire leads with terminals. You may have to fit this switc... 
  48. Contact Point Screws
    Part #
    14-0190
    Contact Point Screws (Pk./4) - Special Screws with lock & Flat Washers for points & subplate, Screws are for mounting & adjustment of points. 
View as List Grid

Items 1-48 of 69

Page
per page
Set Descending Direction