Over 15 years in business
serving the yamaha community
Free Shipping / Easy Returns
within the contiguous U.S over $150
Largest supplier of xs parts
over 2000 parts in stock / ready to ship

Yamaha XS650 Clutch Transmission

Clutch Transmission

As motorcycles age and the miles pile on, a failing clutch becomes inevitable, but Mikes XS has you covered. Our XS650 clutch repair kit has everything you need to put an end to clutch slip. We also offer XS650 friction plates, transmission bearings, shift shaft springs and assemblies, Vesrah XS400 clutch springs, and kick starter and brake lever parts and assemblies. A clutch rebuild is also a good time to replace your XS650 clutch cable.

View as List Grid

47 Items

per page
Set Descending Direction
  1. Clutch Pushrod Oil Seal
    Part #
    01-9019
    Clutch Pushrod Oil Seal - Made in Japan by original maker. Fits: 1970-84 650's OEM Ref.# 93102-08094/08118 (SD - 8-25-6) ArsNote: The Clutch pushrod seal is a chronic leaker.This seal was made to be replaced when the engine cases are split! It can be replaced without splitting the cases but it is tricky to drive it i... 
  2. Gasket - Right hand crank case Cover (Clutch) XS650
    Part #
    18-0864
    Gasket - Right hand crank case Cover (Clutch). - Fits:1970-84 650's OEM Ref.# 256-15451-00 XS1 XS1B XS2 TX650 XS650 
  3. Clutch Push Screw & Housing Assembly Kit
    Part #
    39-6518
    Clutch Push Screw & Housing Assembly Kit.Kit contains: Push Screw Housing with mount screws, Push Screw with Adjuster and locknut, Return spring and anchor pin, Cable Hook with hinge pin. Push screw has Long type actuator arm that gives maximum leverage and provides lightest clutch lever pull. Fits: 1972-84 650's... 
  4. Clutch Repair Kit XS650
    Part #
    39-6600
    Clutch Repair Kit - save over buying separately. Includes:6 Steel friction plates (39-6507)7 Friction plates (39-1133)1 Tab lock washer (39-6512)1 Clutch cover gasket (18-0864)1 Oil filter cover gasket (18-0856)1 Set of clutch springs (39-6506)Other items to consider purchasing separately for your clutch repair dependi... 
  5. Clutch Cable (Black) XS650 1974-84
    Part #
    51-6502
    Clutch Cable (Black) - Fits: Yamaha XS/TX650 (1974-84) Standard models and can also be used on 1978-84 - Specials - with bars that are lower than originals. 55" Long Made in Japan 
  6. Gear Change Lever with rubber XS650
    Part #
    19-0072
    Gear Change Lever with rubber. Chrome plated steel - Fits: 1970-84 650'sAlso fits: XS850 1980-81 and RD's 
  7. Gasket - LH Crankcase Cover XS650
    Part #
    18-0869
    Gasket - LH Crankcase Cover. - Fits: 1972-84 650's.OEM Ref.# 306-15461-00 TX650 XS650 
  8. High Performance Clutch Friction Plates
    Part #
    39-6533
    High Performance Clutch Friction Plates (disks) - Fit: All 650's 1970-84 Sold Each - Order number of pieces required. 1980-84 models - use 6pc.1974-79 models - use 7pc.. 1970-73 model clutch friction plates are No longer available but these later types can replace the originals! (6 friction and 5 steel drive plates wer... 
  9. Clutch Pushrod ( Long one-piece rod)
    Part #
    39-6511
    Clutch Pushrod ( Long one-piece rod). Replaces both inner and outer pushrod and outer ball bearing used on 76-84's. Provides more stable action and allows less wear of clutch pushrod seal Fits: 1970-84 650's. Stock original type for 1970-75 models.(Note photo not to scale). For use as OEM: 341-16376-00-00 / 93505... 
  10. Clutch pushrod Bearing
    Part #
    39-6509
    Clutch pushrod Bearing - Fits: 1970-84 XS/TX650's. 2 used in each 76-84 engine, (only 1 pc. required if long early 70-75 type clutch pushrod is used). 
  11. Clutch Spring Screw
    Part #
    39-6508
    Clutch Spring Screw - Sold Each. - 6 Pieces used per engine. Order what you need. Fits: All 1970-84 XS/TX650's. 
  12. Steel Clutch Drive Plate
    Part #
    39-6507
    Steel Clutch Drive Plate - Sold Each - Order number of pieces required. 1980-84 models - use 5pc.1974-79 models - use 6 pc.1970-73 (use 5pc. OR 6pc. if the clutch is upgraded to late type friction plates. See friction plate listings for conversion info). Oem Ref.# 341... 
  13. Clutch Friction Plates
    Part #
    39-1133
    Clutch Friction Plates (disks) - Fit: 650's 1970-84 - Order number of pieces required. 1980-84 models - use 6pc.1974-79 models - use 7pc.. 1970-73 model clutch friction plates are No longer available but these later types can replace the originals! (6 friction and 5 steel drive plates were originally used). To use thes... 
  14. Clutch pushrod shaft Bushing Yamaha XS650
    Part #
    01-2020
    Clutch pushrod shaft Bushing - Replaces original bushing inside of pushrod housing (transmission shaft) and brings clearances back to original. When stock clearances are too large the pushrod moves to the side and increases tearing stress on the pushrod seal. (See our catalog for detailed installation procedure). 
  15. Clutch Cable (Black) 1978-84 XS650 Special
    Part #
    51-3204
    Clutch Cable (Black) - Fits: XS650 (1978-84) "Specials" with stock pullback type high bars. 58 1/2" Long Made in Japan 
  16. Clutch Hub Lock Tab
    Part #
    39-6512
    Clutch hub Lock Tab - Fits: 1980-84 XS650's OEM Ref.# 90215-19139 
  17. Needle Bearing with Thrust Washer
    Part #
    39-6505
    Needle Bearing with Thrust Washer for rear of inner clutch hub. - Fits: All 650's If your clutch does not seem to release properly or if you have difficulty finding neutral when the engine is hot a worn bearing may be the reason. Our high quality multi-needle bearing assembly is a superior replacement for the original.... 
  18. Clutch Holder Tool
    Part #
    35-5021
    Clutch Holder Tool - Holds inner and outer clutch hubs so that the center nut may be removed without damaging hubs. Fits: All 650 clutches (1970-84). 
  19. Clutch Adjuster Cover
    Part #
    09-6589
    Clutch Adjuster Cover - Chrome - Covers adjuster screw in LH crankcase cover. Fits: 1971-84 XS650's 
  20. 5th. Overdrive Gear for Yamaha XS650(73-84), Main shaft 0.979mm ONLY
    Part #
    05-0869
    5th. Overdrive Gear for Yamaha XS650(73-84), Main shaft 0.979 mm ONLY 0.984 inches or 25 mm (Hole diameter)24 Tooth 5th. Pinion Gear. Replaces 23T 5th.Pinion GearGear fits to stock location and makes fifth gear taller (higher top speed in fifth but less torque and less vibration) but ratios in lower gears remains the s... 
  21. 5 pc. Transmission Bearing Set for Yamaha XS650
    Part #
    05-0850
    5pc. Transmission Bearing Set (Sold as a set/5 Only).Kit includes Shift Drum Bearing and 4 transmission shaft Bearings.Long unavailable and out of production with No substitutes available, Mikes XS has had New production runs of all of these critical bearings done again.Kit Contains 1 each of:-. Countershaft (sprocket... 
  22. Shift Shaft Assembly Yamaha XS650
    Part #
    05-0031
    Shift Shaft Assembly. Fits: All 650's 1970-84. OEM Ref.# 256-18101-03 
  23. Gear Shift Rubber 1970-84 XS650
    Part #
    02-2470
    Gear Shift Rubber - Fits: 1970-84 650's OEM Ref.# 132-18113-01Also fits: RD's 
  24. Oil Seal - Kickstarter shaft
    Part #
    01-9024
    Engine Kickstart Shaft Oil Seal OEM Seal #93102-25064 Ars SD 25-35-7-2HS Fits: All 650's 1970-84, TX750 73-74. 
  25. High Performance Clutch Springs
    Part #
    39-6506
    High Performance Clutch Springs - Set of 6 - Fits: All XS650's 1970-84 Replaces/upgrades sagged original stock springs.Also fits: XT600 Z '90, XS750 77-80, XS1100 '80.Fits the following only using 5 of the 6 springs: XT550 82, SRX600 86, XT600Z 86-88, XT600E 90-92, XTZ660 92-93, SZR660 95-97. 
  26. Clutch Pushrod (Short outer rod)
    Part #
    39-6510
    Clutch Pushrod (Short outer rod). - Stock part for 1976-84 650's. 
  27. Clutch Hub Cush Spring Repair Kit
    Part #
    39-6515
    Clutch Hub Cush Spring Repair Kit for 1970-84 650's Replace broken clutch hub cush springs with this kit.Includes 6 Cush springs and special bolts that replace hub rivets. 
  28. Ring- Clutch Boss (retaining wire)
    Part #
    39-6578
    Spring Steel retaining wire for Inner Clutch Hub (Clutch Boss).This wire holds the first metal clutch plate (special type) in place on the inner clutch hub and is easily damaged if removed from its installed position.Fits: 1980-1984 XS650's 
  29. Clutch Cable (Grey) XS1 XS1B XS2 TX650
    Part #
    51-6500
    Clutch Cable (Grey) - Fits: XS1/XS1B/XS2/TX650 (1970-73)OEM Ref.# 256-26335-02 55 3/4: Long Made in Japan 
  30. Extended Clutch Cable
    Part #
    51-9204
    Extended Clutch Cable - (Black) Clutch - Same as Clutch cable#51-3204 but + 350mm. (13.75") in length. Total outer cable casing length including metal bend that fits to engine is approx 66.5" (1690mm). Fits: Custom High Bar applications for TX/XS650's (1974-84). Great for many custom applications for many bikes. No... 
  31. Clutch Spring Screw Set
    Part #
    39-6504
    Clutch Spring Screw Set - 12pc. - 6 socket head bolts with matching sleeves.Fits: 1970-84 Clutch hub. 
  32. Clutch  Friction Plate
    Part #
    39-1134
    Clutch Friction Plate (disk). From Japan, OEM type with Kevlar.Clutch Friction Plates - Fit: 650's 1970-84 - Order number of pieces required. 1980-84 models - use 6pc.1974-79 models - use 7pc.. 1970-73 model clutch friction plates are No longer available but these later types can replace the originals! (6 friction an... 
  33. Oil Seal - Shift Shaft
    Part #
    01-9026
    Engine Transmission Shift Shaft Oil Seal OEM Seal# 93109-14010 Ars SDD 14-24-6 Fits: All 650's 1970-84 
  34. Shift Shaft Spring - shift arm to Drum
    Part #
    05-0039
    Shift Shaft Spring - upper to shift selector drum arm. - Fits: All 650's 1970-84 OEM Ref.# 90506-08007 
  35. Spring - shift selector drum detent arm
    Part #
    05-0040
    Spring - shift selector drum detent arm. - Fits: All 650's 1970-84 OEM. Ref.# 90506-10022 
  36. Gear - 5th. Main - 22 Tooth for Yamaha XS650
    Part #
    05-0857
    Stock 22 Tooth 5th. Main Gear (located on final output shaft)Replacement for original gear - OEM Ref. # 256-17251-045th gear commonly wears out the engagement dogs causing the transmission to slip out of 5th gear. Replace this gear if you have this problem (cases must be split to install).Fits: XS650's 1978 - 1984 Onl... 
  37. Bigfoot Gear Change Lever XS650
    Part #
    19-6502
    Jasons Bigfoot Gear Change Lever - Do you have feet Larger than the guy that designed the gear lever on your XS ? This extended gear lever for the XS650 will fit better and also improves shifting! Includes rubber. Fits: 1970-84 650's.It is approx. 7 1/4" from the center of the shaft attachment hole to the center of t... 
  38. Kickstarter Assembly 1974-84 XS650
    Part #
    19-6505
    Kickstarter Lever Assembly with Chrome plated Lever Shaft Later Heavy Duty type Kickstarter with rubber (swings out further for more clearance from arm to brake pedal and exhaust).Fits: All 650 Engines 1974-84 
  39. Clutch Hub Spring Washer
    Part #
    39-6513
    Spring Washer for Clutch Hub Nut Replaces OEM # 214-16119-00 Fits: 1974-79 650's 
  40. 27mm. Deep Socket
    Part #
    35-1078
    1/2" Drive 27mm. 6 point deep Socket.Fits: Clutch Hub Nut on All 650's 1970-84 
  41. Kickstarter Spring
    Part #
    19-6506
    Kickstarter Spring Fits: All 650's 1970-84 Yamaha XS650 
  42. Kickstarter Assembly 1970-73 +* XS1 XS2 XS650
    Part #
    19-6504
    Kickstarter Lever Assembly with Chrome plated Lever Shaft Early Heavy Duty type Kickstarter with rubber.Fits: All 650 Engines 1970-73* This can work with later model XS650 with some non-standard mufflers. It does not clear the OEM exhaust.Also fits DS7, R5, RD350 
  43. Gasket - LH Crankcase Cover
    Part #
    18-0674
    Gasket - LH Crankcase Cover. - Fits: 1970-71 XS1/XS1b Only. OEM Ref.# 256-15451-00 
  44. Transmission Mainshaft Bearing
    Part #
    05-0853
    Transmission Mainshaft Double row Ball bearing B5205 - OEM REf.# 93305-20504 Fits: All 650's 1970-84 
  45. Transmission Countershaft Bearing
    Part #
    05-0851
    Transmission Countershaft (sprocket End) B5206 Special Dual row Ball Bearing OEM Ref. # 93305-20602 Fits: All 650's 1970-84 
  46. Shift Shaft Circlip
    Part #
    05-0042
    Shift shaft circlip fits all 1970-'84 XS650's. Installs on shift shaft groove on left hand side of bike next to shift shaft oil seal. 
  47. Clutch Hub Nut
    Part #
    39-6514
    Clutch Hub Nut. Fits: All 650's 1970-84 Use 27mm. Socket Oem Ref.# 90170-18221/18089, 156-16174-00 
View as List Grid

47 Items

per page
Set Descending Direction