Over 15 years in business
serving the yamaha community
Free Shipping / Easy Returns
within the contiguous U.S over $150
Largest supplier of xs parts
over 2000 parts in stock / ready to ship

Yamaha XS650 Fork Tubes, Fork Seals and Springs

Fork Tubes, Fork Seals and Springs

Rust spots on fork tubes can cut the oil seals, causing fork oil to leak and leading to multiple problems. Our line of new XS650 fork tube sets eliminates those issues. We also carry XS650 fork seals and dust caps from K&S and Parts Plus, damper bolts and damper bolt washers, and fork tube caps and damper bolts. Get peak performance from your XS650 café racer with progressive fork springs and dress it up with Commando-style fork gaitors. Also, Hugh’s Handbuilt lowering kits and fork braces can complete the look of your XS chopper or racer. 

View as List Grid

35 Items

per page
Set Descending Direction
  1. Front Fork Damper Valve Set XS650
    Part #
    27-1086
    Front fork Damper Valves (Pair) Fits: 35mm. forks on 1977-84 XS650's.Tuneable Valves are installed on top of the front fork dampening rods and below the fork springs. The adjustable Damper Valve make rod style fork dampers perform like modern cartridge style forks.“The Best suspension upgrade modification for... 
  2. Progressive Front Fork Springs 1977-84 XS650 35mm forks
    Part #
    27-1088
    Progressive Front Fork Springs Front Fork Springs - Fits:XS650 1977-84 with stock 35mm. forks.Springs Improve handling while retaining OEM geometry. Stops front end droop and diving during braking while improving cornering stability. 24mm. Dia. x 484mm. long 
  3. Fork Tube Set 34mm for 1975-76 XS650 1974 TX650
    Part #
    27-3000
    Fork Tube Set(2) - Replace those Worn/Damaged Fork tubes with our New Tubes & restore your front end to proper function & appearance.Fits: TX650A (1974) and XS650B/C (1975-76), OEM Ref. # 533/371-23124 34mm. OD 
  4. Fork Tube Set 35mm 1977-84 XS650
    Part #
    27-3002
    Fork Tubes Set/2 - Replace those worn or damaged stock fork tubes with our new fork tubes and restore your front end to proper appearance and function.Standard length 35mm. Fork Tubes fit All 1977-84 650's. 23" long#27-3002 Replaces OEM #'s : 2F0-23110-00, 1T3-23124-50, 1G3-23124-50 
  5. Fork Seal Set 1977-84 XS650 35mm fork tubes
    Part #
    27-1007
    Fork Seal Set - 35 x 48 x 10.5/11 - Fits: 1977-84 XS 650's (35mm Fork Tubes). Made In Japan by OEM supplier.Also fits: RD350 LC YPVS 83-84, RD350 LCF 85, RD350 LC H 86-90, TZ350 76-78, RD400 F 79, XS400 J/K 82-83, XS400 DOHC 82-87, XS400 R Seca J/K 82-83, XS500 76-78, XS750D 77.Double springNote: Measure fork tubes be... 
  6. Graduated Cylinder
    Part #
    35-2210
    250cc (1/4 Liter) plastic Graduated Cylinder for accurate measuring of fork oil and other fluids. 
  7. 35mm + 6" Fork Tube Set  for 1977-84 XS650
    Part #
    27-3006
    Extended Fork Tube Set/2 (+ 6" over stock length).35mm OD Fit All 1977-84 650's. 
  8. Fork Tube Set 34mm for 1972-73 XS2 and TX650
    Part #
    27-2002
    Fork Tube Set(2) - Replace those Worn/Damaged Fork tubes with our New Tubes & restore your front end to proper function & appearance.Fits: XS2 (1972) and TX650 (1973)OEM Ref. # 306-23124-60-00 34mm. OD 
  9. Fork seal Dust Covers
    Part #
    27-1065
    Fork seal Dust Covers (Pk/2) - Fits: 1977-84 XS650D-K (35mm. fork tubes). 
  10. Fork Seal Retaining Clip 1977-84 XS650 35mm forks
    Part #
    27-1063
    Fork seal Spring Clips (Pk/2) - These clips fit into the groove above the fork seals in the lower fork legs.Fits: All 1977-84 650's 35mm forks 
  11. Fork Seal Set 1970-76 XS1 XS2 XS650 TX650 34mm fork tubes
    Part #
    27-1016
    Fork Seal Set - 34 x 46 x 10.5 - Fits: 1970-76 TX/XS 650's (34mm fork Tubes). Made In Japan by OEM Supplier.Also fits:DT250 74-78, DT250 MX 77-78, RD250 73-75, RD350 73-75, DT400 75-78, DT400 MX 77-79, RD400 76-78, TX500 73-74, XS500 75-78, TX650 A 74, XS750 1977Note: Measure fork tubes before ordering. 
  12. Damper Bolt Sealing Washers
    Part #
    18-5020
    Damper Bolt Sealing Washers - copper (Pk/2) - Fits under allen socket head damper retaining bolts (Lower fork leg to inner dampers). 
  13. Damper Bolt Driver
    Part #
    35-5022
    Damper Bolt Driver - Deep type damper bolt driver used to air impact recessed damper bolts from lower fork legs. 
  14. Fork Cap O-Rings for 35mm forks
    Part #
    27-5001
    Fork Tube Cap O-Ring (Pk/2) for 35mm. Forks Fits: All XS650's 1977-84 
  15. Fork Cap O-Rings 34mm forks 1970-76 XS1 XS2 XS650 TX650
    Part #
    27-5000
    Fork Tube Cap O-Rings (Pk/2) for 34mm. Forks Fits: XS1/XS1b/XS2/TX650/TX650A/XS650B/XS650C (1970-76) 
  16. 35mm Fork Tube Caps 1977-84 XS650
    Part #
    27-4004
    Fork Tube Caps - Set/2 - Stock Aluminum type but with No preload adjuster.Caps Fit: 35mm. fork tubes on XS650's 1977-84. Replaces troublesome adjustable US model Cap used on 1978-84 650'sNote: Adjustable caps were never used on 650's outside of North America.22mm. Hex top Caution! Fine thread, use care when installin... 
  17. 35mm Fork Tube Set + 4"  for 1977-84 XS650
    Part #
    27-3004
    Extended Fork Tube Set/2 (+ 4" over stock length).35mm. OD Fork Tubes to fit All 1977-84 650's . 
  18. Fork Gaitor - 35mm Norton Commando style
    Part #
    27-1095
    Fork Gaitor - 35mm Norton Commando style.Fit XS650 and XS400 well.Black rubber - end openings are 33mm (1 5/16") and 43mm (1 3/4"). compressed length 82mm (7 1/4"), free length approx. 184mm (12").Diameter is approximately 61mm (2.4").Yamaha's with standard 35mm forks: XS400 Maxim 82-83, SR500 E/F/G/H 78-81, XS500 C/D/... 
  19. Fork tube top Cap 1977-84 XS650
    Part #
    27-1091
    Cap (Fork Tube Top Cap/Rubber Plug) -Pk/2 - Original type as used on 1977-84 XS650's. 
  20. Fork Gaitors XS1 XS650
    Part #
    27-1089
    Fork Gaitors (Pr.) for 1970 XS1 650 but adaptable to All 1971-84 models (remove stock dust covers). Give your 650 that "British" look. Provides great fork protection. 1970 models had a lip piece on the lower triple tree on which to clamp the boot, for later models simply insert a piece of split rubber rad hose inside a... 
  21. Damper retaining bolts.
    Part #
    18-5021
    Damper retaining bolts. Fits into lower fork leg to inner fork damper. Special size allen socket head. Fits: XS650's 1977-84 
  22. Fork Seal Washers 1977-84 XS650 35mm forks
    Part #
    27-1062
    Fork seal Washers Fit on top of Fork Seals and below the spring clips in the lower fork legs.Fits: All 1977-84 XS650's. For 35mm forks. 
  23. Fork seal Dust Covers
    Part #
    27-1066
    Fork seal Dust Covers (Pk/2) - Fits: 1971-76 XS/TX650's (34mm. fork tubes). 
  24. Fork Brace
    $72.94
    Part #
    27-1070
    Fork Brace - Stiffens front end, improves handling. Precision Steel construction, Chrome plated finish. Fits:1977-84 650's. (over fender). Installation Instructions 
  25. Progressive Front Fork Springs 1974-76 XS650 TX650 34mm forks
    Part #
    27-1087
    Performance Progressive wound Front Fork Springs - Fits: 34 mm. stock forks on TX650A (1974) and XS650B/C (1975-76). Springs Improve handling while retaining OEM geometry. Stops front end droop and diving during braking while improving cornering stability. Progressive design combats bottoming in harsh conditions by i... 
  26. Fork Oil Level Gauge
    Part #
    35-1084
    Fork Oil Level Gauge for adjusting the oil level on all XS650 forks.Adjustable ring measures oil levels from 0-300mm. in 50mm. increments.60ml. capacity syringe adjusts fluid levels. 
  27. Fork Tube Cap Tool
    Part #
    35-1081
    17mm. Hex (Allen) bit Tool to remove fork tube top caps.Fits: Fork caps on TX650A (1974), XS650BC (75-76) and 1977D (version without preload adjuster).A perfect fit to remove those soft alloy fork tube caps without damage. 
  28. Fork Cap Box Wrench
    Part #
    35-1080
    32mm. 6 point Box Wrench - chrome plated steel. Also has 39mm. size. Fits fork cap for 70-72. Also some clutches. 
  29. 22mm. Fork Cap Wrench
    Part #
    35-1076
    22mm. 12 Point Fork Cap Wrench. Removes alloy fork Tube Caps.Fits: TX650 (1973), XS650 (1978-84). 
  30. 35mm Fork Tube Caps 1977-84 XS650
    Part #
    27-4003
    Fork Tube Caps - Set/2 - Stock Steel OEM type - Flat bottom no preload adjuster.Caps Fit: 35mm. fork tubes on XS650D (1977) and also fit to all 1978-84 fork tubes Recommended type for 77-84 models using our 27-1088 progressive type fork springs and/or our fork damper valves #27-1086.OEM Ref.# 1T3-23111-50-00Note: Use... 
  31. 34mm Fork Tube Caps 1974-76 XS650
    Part #
    27-4002
    Fork Tube Caps - Set/2 - Stock Aluminum OEM type Caps Fit: 34mm. fork tubes on TX650A (1974) & XS650B/C (1975-76).Replaces OEM # 341-23111-50/51Note: Use Fork Cap Tool (17mm. Hex) #35-1081 to remove or install.Caution! Fine thread, use care when installing. 
  32. 34mm Fork Tube Caps for 1970-72 XS1 XS1b XS2
    Part #
    27-4000
    Fork Tube Caps - Set/2 - Stock Chromed Steel OEM type Caps Fit: 34mm fork tubes on - XS1/XS1b/XS2 (1970-72)OEM Ref. 256-23111-60-00Caution! Fine thread, use care when installing. 
  33. Fork Tube Set + 2" 35mm 1977-84 XS650
    Part #
    27-3003
    Extended Fork Tube Set/2 ( + 2" over stock length ).35mm. OD Fork Tubes to fit All 1977-84 650's. 
  34. Fork tube top Cap 1974-76 XS650
    Part #
    27-1092
    Cap (Fork Tube Top Cap/Rubber Plug) -Pk/2 - Original type as used on 1974-76 TX/XS650's. 
  35. Graduated Cylinder
    Part #
    35-2211
    500cc (1/2 Liter) plastic Graduated Cylinder for accurate measuring of fork oil and other fluids. 
View as List Grid

35 Items

per page
Set Descending Direction