Suspension

Leaky fork seals on your Yamaha XS might simply be irritating at first, but bigger problems are right around the corner. As the oil spills out of the sliding tube, it can coat the brake pads or the front wheel in no time. To keep your XS750 in safe running condition, replace its leaky oil seals at the first sign of leakage. Mikes XS carries a variety of XS750, XS850 and XS1100 fork seals. We also stock XS750 steering stem bearing sets and Monza shock absorber sets

View as List Grid

7 Items

per page
Set Descending Direction
  1. Monza Shock Absorber Set 12 3/4" (325mm) eye to eye 1974-84 +
    Part #
    06-3607
    Shock Absorber Set - (Monza Traditional) standard size for 1974-84 XS650 TX650's - Dual Progressive wound Chrome Springs & Long Black top shroud with black shock body.12 3/4" (324mm.) eye to eye., Includes preload wrench & set of eye rubbers.Can be used as replacement on: Yamaha RD400 1976-79, XS400 1977-81,... 
  2. Fork Seal Set 1977-84 XS650 35mm fork tubes
    Part #
    27-1007
    Fork Seal Set - 35 x 48 x 10.5/11 - Fits: 1977-84 XS 650's (35mm Fork Tubes). Made In Japan by OEM supplier.Also fits: RD350 LC YPVS 83-84, RD350 LCF 85, RD350 LC H 86-90, TZ350 76-78, RD400 F 79, XS400 J/K 82-83, XS400 DOHC 82-87, XS400 R Seca J/K 82-83, XS500 76-78, XS750D 77.Double springNote: Measure fork tubes be... 
  3. Fork Seal Set 1970-76 XS1 XS2 XS650 TX650 34mm fork tubes
    Part #
    27-1016
    Fork Seal Set - 34 x 46 x 10.5 - Fits: 1970-76 TX/XS 650's (34mm fork Tubes). Made In Japan by OEM Supplier.Also fits:DT250 74-78, DT250 MX 77-78, RD250 73-75, RD350 73-75, DT400 75-78, DT400 MX 77-79, RD400 76-78, TX500 73-74, XS500 75-78, TX650 A 74, XS750 1977Note: Measure fork tubes before ordering. 
  4. Swing arm bolt Grease Fitting
    Part #
    28-1026
    Swing arm bolt Grease Fitting - Replace original grease fittings with ones that fit to common American size grease guns. Fittings fit to ends of swing arm shaft (bolt). 2 required per bike. Fits: All 650's 1970-84Also fits Center Stand Bolt XS650 item #37-0001 
  5. Alloy Bracket for 35mm fork tubes
    Part #
    28-4001
    Alloy Bracket - For Fork tube end of our Hydraulic Steering Damper.Fits: 35mm. Fork tubes on Yamaha XS650's (1977-84). Made in Japan Bikes with standard 35mm forks: XS400 Maxim 82-83, SR500 E/F/G/H 78-81, XS500 C/D/E 76-78, XJ550 RH/RJ/RK Seca 81-83, XZ550 RJ/RK Vision 82-83, TX750 A 73-74, XS750.Will work with Yamaha... 
  6. Fork Seal Kit XS400 XS500 XS750
    Part #
    40-2702
    Fork Seal Kit (35x48x11mm)Fits:RZ350 L/N/NC/NCII 1984-85 XS400 J/K Maxim 1982-83 XS400 RJ/RK SECA 1982-83 XS500 C/D/E 1976-78 XS750D 1977Honda: CB500 T 75-76, CB500 71-73, CB500 89-90, CB550 F 75-77, CB650 79-80, CB650 C 80-82, CB750A 76-78, CB750 F 79-80, CB450 70-74, CB 750 70, 72, CB750 K 74-82, CB 750 F 75-78, CB7... 
    • Out of stock
  7. Steering Bearing Set Yamaha XS750 XS850 XS1100
    Part #
    43-2800
    Steering Bearing Set. XS750 1977-80, XS850 1980-81, XS1100 1978-81Also fits: TZ250 F-J 79-82, WR250 Z 91-97, XT250 84, YZ250 77-95, YBR250 11, TT350 86-87, XT350 H 85-90, FZR400R 88-90, IT400 79, YZ400 77-79, IT425 80, IT465 81-82, YZ465 81, IT490 83-84, YZ490 82-90, XP500 T Max 03-07, XT550 82-83, FZR600 R 89-95, FZS6... 
View as List Grid

7 Items

per page
Set Descending Direction