Hugh's Handbuilt Black Speedster Bars
Hugh's Black Speedster handlebars. Inspired by Hughs very first build, these bars are the perfect fit for your XS650 or SR500 (and others, check bolt pattern on upper triple tree). The XS650 and other bikes suffer from a short top tube, and when combined with drag bars or clip-ons, can become rather cramped.Hugh built the HandBuilt Speedster bars as a solution for a less cramped cockpit than your standard drag bars or clip-ons. With just the right angle built into the pullback of these bars, they are both comfortable and look killer.At 31 inches wide, these ship out a tad longer than needed, so you can custom fit them to your bike and trim the width as desired.These are HandBuilt in house, TIG Welded using DOM 7/8 inch OD Tubing and Laser Cut Mount. Stainless hardware is provided.The mounting holes are tapped for M12 x 1.75 Hardware, and are 3.93 inches center to center. *These will mount to the OEM rubber mounts in your triple tree, however we recommend the Hughs HandBuilt Solid Riser Bushings to really clean up your front end and get rid of the squirm in the bars.