Mikes XS

Polished Chrome finish Custom/Sport Front Fender.
Fits: All 1977-84 650's.
Mounts to lower fork legs same as original fender.
12mm. mounting holes @ 2 3/8" center to center (60mm.)
Fender is heavy guage steel construction,
approx 5 3/8" wide and fully chromed.

This fender is a tight fit and doubles as a fork brace (very stiff construction).
To: Install - Remove old fender and front wheel and axel . Slide fender in
between fork tubes and down into position, install mount bolts but do not
tighten, reinstall axel and wheel, tighten axel until lower fork legs are
parallel, Align fender straight and tighten down fender mount bolts.

Dual coat Black paint finish Custom/Sport Front Fender.
Fits: All 1977-84 650's.
Mounts to lower fork legs same as original fender.
12mm. mounting holes @ 2 3/8" center to center (60mm.)
Fender is heavy gauge steel construction,
approx 5 3/8" wide and is Double coat painted (top & bottom)

This fender is a tight fit and doubles as a fork brace (very stiff construction).
To: Install - Remove old fender and front wheel and axel . Slide fender in
between fork tubes and down into position, install mount bolts but do not
tighten, reinstall axel and wheel, tighten axel until lower fork legs are
parallel, Align fender straight and tighten down fender mount bolts.

Bolt Set(4) with Lockwashers(4) to mount the front fender to the front forks.
Fits: 78-84 "Special" model front fenders.

Front fender Speedo cable loop.
Fits: Stock fender on all 1977-84 XS650's

Plastic Side Cover Set/2 - Black Finish
Fits: 1980-84 XS650 "Specials" with stock plastic sidecovers.
Sold in Sets Only! Emblems available separate. Each sidecover Set includes
new mounting rubbers. Our sidecovers are exact in shape to originals but come
undrilled so that badge mounting is optional. The rear of the sidecovers are
dimpled in the correct original badge hole locations so that they can be drilled
for badge mount holes if desired.

Plastic Side Cover Set/2 - Chrome Finish
Fits: 1980-84 XS650 "Specials" with stock plastic sidecovers.
Sold in Sets Only! Emblems available separate. Each sidecover Set includes
new mounting rubbers. Our sidecovers are exact in shape to originals but come
undrilled so that badge mounting is optional. The rear of the sidecovers are
dimpled in the correct original badge hole locations so that they can be drilled
for badge mount holes if desired.

Sidecover Emblem Set (3G1)- Gold- for 1980
XS650SG but also fits to all 78-81 "Specials"


Note: This set is 2pc. of RH Sidecover badges. These fit to both sidecovers
and the difference (Checkmark) is not usually noticeable unless they are
installed on old paint.

Sidecover Emblem Set (4M4) - Gold - for 1981
XS650SH but also fits to all 78-81 "Specials"

Sidecover Emblem Set - "Heritage Specials" (3NO)- stock adhesive mount back.

Damper Grommet for sidecover (Upper - Pk./2 for 1 sidecover) - Fits:XS650SG-
SL (1980-84) "Specials" with plastic sidecovers. See web site model ID photo's
of sidecovers if you are unsure of your sidecover type.

Damper Grommet for sidecover - (Lower single piece for 1 sidecover
fits into frame tube). Fits: Plastic covers as used on XS650SG-SL
plus H Special II 1980-84 "Specials". See web site model ID photo's
if you are unsure of your sidecover type.

Damper Rubber (2Pc. Set for 1 sidecover) Fits: To 1 3/8" wide upper hanger for
Metal side cover as used on XS/TX650 1974-79 "Standard" models. See web
site model ID photo's of sidecovers if you are unsure of your sidecover type.

Damper Rubbers (Pk./2 for 1 sidecover) Fits: To 1" wide upper hanger for Metal
side cover as used on XS650Se/Sf/2F/G 1978-80. See web site model ID photo's
of sidecovers if you are unsure of your sidecover type.

Knob/Latch assembly for Metal side covers used on 1974-80 Models. Includes
knob, Spring, rubber grommet, roll pin and special washers.

Steel Fuel Tank - 3.9US gallon (15 litre) " Standard" type
Includes New Manual type #20-0019 Petcocks (Two) and chrome gas cap.
Tank is painted Black with Gold stripes (No Yamaha Name) and is patterned
after the original 1977D model. Fits: Any 1974-84 XS/TX650.

Gas Cap with keys - Fits: 1976-79 XS650 "Standard" models and our 64-7700 and
64-7702 Fuel Tanks.

Note: Caps from "Standards" and "Specials" do not interchange.

Fits: 1978-84 650 "Specials"

Note: Caps from "Standards" and "Specials" do not interchange.

Gas cap Rubber Seal - Fits: All 1976-84 XS650 gas caps.

Gas cap Rubber Seal - Fits: All 1974-75 XS/TX 650 gas caps.
Oem Ref.# 341-24612-01

Fits: 1970-72 XS1/XS1b/XS2 650's. Black background
with white chrome letters. Original for 1970 XS1. Note: Will not fit later 650's

Tank Badge - Fits: 1970-72 XS1/XS1b/XS2 650's. Black and Red background
with white chrome letters. Original for 1970 XS1. Note: Will not fit later 650's

Tank Badge - Fits: 1978-84 XS650 (2pc Set - 1RH & 1 LH) - Gold letters.

Tank Badge - Fits: 78-84 XS650 (2pc Set - 1RH & 1 LH) - Like # 65-6502 Only
with White Chrome letters.

Gas Tank Mount Rubber - Front - Fits: All 650's 1970-84

Gas Tank Mount Rubber - Rear - Fits: All 650's 1970-84

Chain Guard - Chrome - Replica of Original "Special" model chain guard.

Fits: 1974-84 650 "Special" or Standard models.

Note: Remove the Rear Wheel to install Chain Guard

Chain Guard - Black - Replica of Original "Special" model chain guard.
Fits: 1974-84 650 "Special" or Standard models.

Note: Remove the Rear Wheel to install Chain Guard

Rubber Grommet with metal bushing - Fits: Sidecover latch , Headlamp adjuster,
Mount - lower (plastic section) of Rear fender, Front mount point of chain guard,
Tail lamp base to fender (round tail lens), Rear master cylinder reservoir mount
(1978-80 ) OEM Ref.#'s 214-21717-00 / 90480-14101/102-00/14023-00 + collar
90387-07390-00/0714B-00