Suspension

Monza Shock Absorber Set 12 3/4" (325mm) eye to eye 1974-84 +

Shock Absorber Set - (Monza Traditional) standard size for 1974-84 XS650 TX650's - Dual Progressive
wound Chrome Springs & Long Black top shroud with black shock body.
12 3/4" (324mm.) eye to eye., Includes preload wrench & set of eye rubbers.

Can be used as replacement on: Yamaha RD400 1976-79, XS400 1977-81, SR500 1978-81, XS750 1977-78, XS850 1980-81, XS1100 1979-81, XV700 1984-86, XJ750 1981-83, XJ900 1983, XJ1100 1982, XV1100 1984-86, RD250 1978-79
Eye to eye 325mm is standard size for:
Suzuki GT185 1972-77, GS250 1980-81, GT250 L/M/A/B/C 1973-78, T250 1970-73, T350 1970-73, GT380 1972-77, GS400 1977-78, GT500 1975-77, T500 1971-75, GT550 1972-77, GS650 GLX 1982, VS700 1985-86, GT750 1972-77
Kawasaki KZ200 A1 A2 1978-79, KZ250 D/L/W 1980-83, KH250 1973-76, KZ350 A/B 1981-88, KH400 A3 A4 1975-76, S3 A (400) 1974-75, KZ400 A/B/C/D/S 1974-79, H1 A-F KH500 1969-1976, KZ550 C1-C4 1980-83, KZ650 B/C/D/E/F/H 1977-83, NV700 A1 1985, H2 A/B/C (750) 1972-75, KZ750 B1-B4 1976-79, VN750 A2-A4 1986-88
Honda CX500 C/D 1978-82, VT500FT 1983-84, XBR500 1987-89, CB650 SC 1982-85, VF700 C 1986-87, VT750 C 1983, CB900 C 1980-82, CB1000 C 1983.
Part #06-3607
$92.50 USD Set
Add to Cart

Shock Absorber Set 12 3/4" (325mm) 74-84 +

Shock Absorber Set - (Monza Standard) for 1974-84 XS/TX650's - Chrome Springs, cap
with chrome shock body. 12 3/4" (324mm.) eye to eye. Includes preload wrench
& set of eye rubbers.


*** Note - the top is painted a chrome color, and not chrome plated
Part #06-3627
$88.00 $83.00 USD Set
Add to Cart

Monza Sport Shock Absorber Set 12.75" (324mm) black w/chrome spring

Shock Absorber Set - (Monza Sport) for 1974-84 XS/TX650's -Dual progressive
wound Chrome Springs & Chrome top shroud with Black shock body.
12.75" (324mm.) eye to eye., Includes preload wrench & set of eye rubbers.
Part #06-3647
$92.50 $82.00 USD Set
Add to Cart

Fork Seal set (2) Yamaha RD400 1978-79 SR500 1978-93 XS650 1977-83 TX750 1973-74

This product is temporarily out of stock.
Fork Seal set (2)

Fits: RD400 1978-79, SR500 1978-93, XS650 1977-83, TX750 1973-74
Part #44-2710
$9.95 USD Set/2
Out of Stock

Fork Seal Set 1970-76 XS1 XS2 XS650 TX650 34mm fork tubes

Fork Seal Set - 34 x 46 x 10.5 - Fits: 1970-76 TX/XS 650's (34mm fork Tubes).
Made In Japan by OEM Supplier.

Also fits:

DT250 74-78, DT250 MX 77-78, RD250 73-75, RD350 73-75, DT400 75-78, DT400 MX 77-79, RD400 76-78, TX500 73-74, XS500 75-78, TX650 A 74, XS750 1977

Note: Measure fork tubes before ordering.


OEM Reference #
• 278-23145-51
• 584-23145-50-00

Part #27-1016
$11.95 USD Set
Add to Cart

Fork Seal Set 1977-84 XS650 35mm fork tubes

Fork Seal Set - 35 x 48 x 10.5/11 - Fits: 1977-84 XS 650's (35mm Fork Tubes).
Made In Japan by OEM supplier.

Also fits: RD350 LC YPVS 83-84, RD350 LCF 85, RD350 LC H 86-90, TZ350 76-78, RD400 F 79, XS400 J/K 82-83, XS400 DOHC 82-87, XS400 R Seca J/K 82-83, XS500 76-78, XS750D 77.

Double spring

Note: Measure fork tubes before ordering.


OEM Reference #
• 1T3-23145-00

Part #27-1007
$11.95 USD Set
Add to Cart

Alloy Bracket for 35mm fork tubes

Alloy Bracket - For Fork tube end of our Hydraulic Steering Damper.
Fits: 35mm. Fork tubes on Yamaha XS650's (1977-84). Made in Japan
Bikes with standard 35mm forks: XS400 Maxim 82-83, SR500 E/F/G/H 78-81, XS500 C/D/E 76-78, XJ550 RH/RJ/RK Seca 81-83, XZ550 RJ/RK Vision 82-83, TX750 A 73-74, XS750.

Will work with Yamaha 35mm forks, including standard SR500, RD400 1979.
Part #28-4001
$28.95 USD Ea.
Add to Cart

Alloy Bracket for 34mm fork tubes

Alloy Bracket - For Fork tube end of our Hydraulic Steering Damper.
Fits: 34mm. Fork tubes on Yamaha XS/TX650's (1971-76). Made in Japan.
Bikes with standard 34mm fork tubes: R5, DS7 1970-72, RD350 73-75, TX500 73-75, XS500 73-75, XS1, XS1b, XS2, TX650 1970-73.
Please note that we find the forks have been changed on some old bikes.Will work with Yamaha 34mm forks, including RD400 1978.
Part #28-4014
$28.95 USD Ea
Add to Cart

Swing arm Needle Bearing Conversion Kit XS650 RD350 RD400 XS400

Swing arm Needle Bearing Conversion Kit - Kit includes - Needle Bearings &
Hardened shaft. Fits: XS/TX650's 1974-84 - Made in Japan.

The needle bearings replace the original plastic bushings. Some bikes may have replacement bronze bushings. You do not need those in addition to this kit.

Also fits:
RD250 73-75, RD350 A/B 73-75, RD350 LC 80-82, RD350 LCYPVS 83-84, RD400 76-79
XS400 77-82 except SECA and Maxim, XJ550 Maxim and Seca 81-83
Part #28-1011
$105.50 USD Kit
Add to Cart

Steering Stem Bearing RD250 RD350 RD400 XS360 XS400 +

Steering Stem Bearing Kit

Fits:
RD125 B/C 75-76, TZ125 G 1980, XV125 S 99, XV125 97-00
RD200 A/B/C 74-76, RD250 A/B 73-75
SR250 G/H/J Exciter 80-82 , SR250 TH Exciter II 1981 , SRX250 T/TC 1987
TD3/TR3 250 (Race) 1972, TZ250 (Race) 1973
XV250 U/UC/W/WC Route 66 88-89, XV250 A/AC Route 66 1990, XV250 G/GC-L/LC Route 66 95-99, XV250 M/MC-T/TC Virago 250 00-05
R5/B/C 350 70-72, RD350 A/B 73-75
RZ350 L/N/NC/NCII 84-85, TZ350 C/D/E 74-78
XS360 C/D/2D 76-77
RD400 C/D/E/F 76-79
XS400 D/E/F 77-79, XS400 2E/2F 78-79, XS400 G/H Special II 80-81, XS400 J/K Maxim 82-83, XS400 RJ/RK Seca 82-83, XS400 SG/SH Special 80-81, XS400 SJ Heritage Special 1982
XV500K Virago 1983
XV535 T/TC/U Virago 87-88 , XV535 A/AC Virago 1990 , XV535 E/EC-L/LC Virago 93-99, XV535 SF/SFC-SJ/SJC Virago 94-97
XJ550 H/J/K Maxim 81-83, XJ550 RH/RJ/RK Seca 81-83
FJ600 L/LC/N/NC 84-85, YX600 S/SC-A/AC Radian 86-90
Part #40-2821
$59.50 USD Kit
Add to Cart

Replacement Needle Shaft Bearing

Replacement shaft Needle Bearing for #28-1011 conversion kit
Part #28-1020
$9.75 USD Ea.
Add to Cart

Replacement Shaft End Bearing

Replacement Shaft End Bearing (Needle thrust washer) for kit #28-1011
Part #28-1021
$18.55 USD Ea.
Add to Cart

Swingarm Grease Seal Set

Swingarm Grease Seal Set - Holds grease into bushings & shaft area of swing
arm. Helps seal out water & dirt. If your bike has originals they should be re-
placed! ( 20+ years). Made in Japan by original supplier. Fits: All 650's 1970-1984


OEM Reference #
• 447-22128-00

Part #28-1025
$16.50 USD Set
Add to Cart

Swing arm bolt Grease Fitting

Swing arm bolt Grease Fitting - Replace original grease fittings with ones that
fit to common American size grease guns. Fittings fit to ends of swing arm
shaft (bolt). 2 required per bike. Fits: All 650's 1970-84

Also fits Center Stand Bolt XS650 item #37-0001
Part #28-1026
$2.00 USD Ea
Add to Cart

Swingarm Pivot Bolt (Shaft)

Swingarm Pivot Bolt (Shaft) - Bolt with full size thread (replaces undercut original).
Fits: XS650's 1974-84. Check your original for cracks at the threads.


OEM Reference #
• 447-22141-00

Part #27-1067
$28.95 USD Ea.
Add to Cart

Bushing

Bushing (swing arm Bolt tube) OEM Ref.# 341-22184-00

Note: Tube is a slip fit through bronze bushings.
Replace if original is galled or will not fit through
new bronze bushings.

Fits: All 650's 1970-84


OEM Reference #
• 447-22184-00
• 90386-22102-00

Part #27-1068
$30.50 USD Ea.
Add to Cart

Swingarm Pivot Bolt (Shaft)

Swing-arm Pivot Bolt (Shaft) - Bolt with full size thread (replaces undercut original).
Fits: XS1 / XS1b / XS2 / TX650 (1970-73).
Check your original for cracks at the threads.
Contains:1 grease fitting and 1 removable nut

Additional grease fitting available, see # 28-1026


OEM Reference #
• 256-22141-00
• 256-22141-02

Part #27-1071
$28.95 USD Ea
Add to Cart

The name Yamaha and any other trade names or symbols belonging to each respective corporation are stated for reference purposes only. The products on this site are after market (not OEM) replacement parts and accessories only. We have no relationship to the listed companies.