- New Items
- Sale Items
- Filters
- Chassis
- Brakes
- Wheels
- Suspension
- Engine
- Electrical
- Fuel System
- Exhaust
- Accessories
- Tools & Manuals
- Hardware
- Cafe, Chopper, Bobber Parts
- XS360 XS400 Parts
- SR500 Parts
- XS750 XS850 XS1100
- R5 RD250 RD350 RD400
- Product Search
Fuel System
- Brakes
- Chassis
- Filters
- Electrical
- Fuel System
- Wheels
- Suspension
- Exhaust
- Accessories
- Hardware
- Engine and Clutch
- Manuals
Mikuni Pocket Tuner
Mikuni Pocket Tuner. A handy pocket-size calculator which can be used to determine required jetting changes in Mikuni carburetors due to climate and temperature changes. The Pocket Tuner is applicable to both single and multi-carb applications on two-stroke and four-stroke engines. It also has a guide for determining rich or lean carburetor conditions.
For Mikuni Tuning Manual see 35-0665.
For Mikuni Tuning Manual see 35-0665.
Mikuni Tuning Manual for motorcycle carburetors
Mikuni carburetor Tuning Manual from Sudco. 92 page manual includes exploded parts views, parts listings and optional parts. Guides you through tuning and trouble shooting for the popular lines of Mikuni carburetors. The definite reference for Mikuni carburetors and a must for the do-it-yourselfer.
For Mikuni Pocket Tuner, see 48-8106.
For Mikuni Pocket Tuner, see 48-8106.
Universal 2 into 1 throttle cable (adjustable length both ends)
Universal 2 into 1 throttle cable (adjustable length both ends)Fixed ends make your own cable. Does not include carb adjusters (see parts 48-9161, 48-8027, 48-7016)*** Not Returnable***
Total length 63 1/4 inches, Junction box is 4 1/2 Inches, Duel end sleeve length 14 12 from junction box, Dual end wires 22 inches from junction box, single side 29 1/4 inches from junction box, single wire 36 3/4 inches from junction box)Can be adjusted to your needs
**** This part needs modification, including sodering gun, crimping tools, and experience with modifications.
Fixed ends make your own 2-1 cable!
Total length 63 1/4 inches, Junction box is 4 1/2 Inches, Duel end sleeve length 14 12 from junction box, Dual end wires 22 inches from junction box, single side 29 1/4 inches from junction box, single wire 36 3/4 inches from junction box)Can be adjusted to your needs
**** This part needs modification, including sodering gun, crimping tools, and experience with modifications.
Fixed ends make your own 2-1 cable!
Extended Throttle Cable
Extended Throttle Cable - (Black) Throttle - Same as Throttle Cable
#51-3502 but + 350mm. (13.75") in length. Total outer cable casing
length including throttle end adjuster fitting is approx 58.5" (1485mm).
Cut the outer cable to the desired length, crimp on the casing ferule,
trim the inner cable to length and then solder on the carb end cable
nipple (ferule and end nipple included in pack).
Fits: Custom High bar applications for XS650's (1976-84). Great for many custom applications for many bikes. They are "cut to length" and so can be made shorter. Can be used with XS400.
Note: Soldering required and length difference between inner and outer
cables must be kept same as stock cables.
#51-3502 but + 350mm. (13.75") in length. Total outer cable casing
length including throttle end adjuster fitting is approx 58.5" (1485mm).
Cut the outer cable to the desired length, crimp on the casing ferule,
trim the inner cable to length and then solder on the carb end cable
nipple (ferule and end nipple included in pack).
Fits: Custom High bar applications for XS650's (1976-84). Great for many custom applications for many bikes. They are "cut to length" and so can be made shorter. Can be used with XS400.
Note: Soldering required and length difference between inner and outer
cables must be kept same as stock cables.
Gasket - Float Bowl Mikuni BS38 CV carburetors
Gasket - Float Bowl - Fits: 1970-79 XS/TX650 Stock 38mm. Mikuni CV Carbs. XS1/XS1B/XS2 70-72.
OEM Ref.# 256-14984-00
Also fits: XS360 C/D/2D 76-77, XS500 C/D 76-77, TX650 A 73-74, TX750 A 73-74. XS750 D/2D 77
OEM Reference #
• 256-14984-00
Carb Holder Spacers (set 2) 1978-84 XS650
Billet Aluminum Carburetor Spacers, 35.75mm thick. (Set/2) 35mm ID
Fits: To any XS650 Head and improves Low end power and
acceleration.
Dyno developed to provide maximum low RPM Torque with
Dellorto PHF 36.
Note: PHF 36 Carbs + Spacers + Pod filters fit to stock
space (head to battery box).
An essential component of the XS PWK 32 Flatside carburetor kit.
Fits: To any XS650 Head and improves low end power and acceleration.
Dyno developed to provide maximum low RPM Torque and optimum throttle
response on the XS PWK flatslide carb set. Requires removal of side covers on 70-77 bikes. Part 48-7501 is cut down to eliminate this requirement.
Can be used to adapt our Performance carb kit to the XS400.
Fits: To any XS650 Head and improves Low end power and
acceleration.
Dyno developed to provide maximum low RPM Torque with
Dellorto PHF 36.
Note: PHF 36 Carbs + Spacers + Pod filters fit to stock
space (head to battery box).
An essential component of the XS PWK 32 Flatside carburetor kit.
Fits: To any XS650 Head and improves low end power and acceleration.
Dyno developed to provide maximum low RPM Torque and optimum throttle
response on the XS PWK flatslide carb set. Requires removal of side covers on 70-77 bikes. Part 48-7501 is cut down to eliminate this requirement.
Can be used to adapt our Performance carb kit to the XS400.
Carb Float Set XS400 XS500 XS750 XS1100
This product is temporarily out of stock.Carb Float Set. XS400 1977-79, XS500 1978, XS750 1978-79, XS1100 1978-79
OEM Reference #
• 2A2-14985-00
• 537-14186-00
Part #40-4830
$24.00 USD Ea
Out of Stock Carb Repair Kit XS400 XS750 XS1100
This product is temporarily out of stock.Carburetor Repair Kit. XS400 1980-82, XS750 E/F/SF 1978-79, XS750 SE 1980, XS1100 1980, XS1100 SE 1981
Includes float needle assembly, chamber gasket and O rings.
Part #40-4805
$10.00 USD Ea
Out of Stock Float Needle with clip Mikuni BS34 CV carbs
Float Needle with clip - Fits: XS650G-K 1980-84 Stock 34mm. Mikuni CV Carburetors
- Viton tipped Needle & clip Only!
Also fits: SR250 80-82, XS400 G/H Special II 80-81, XS400 SG/SH/SJ Special 80-82, XV750 88-95, XV1100 88-97, XS1100 80-81,
- Viton tipped Needle & clip Only!
Also fits: SR250 80-82, XS400 G/H Special II 80-81, XS400 SG/SH/SJ Special 80-82, XV750 88-95, XV1100 88-97, XS1100 80-81,
Carb Holder Set XS400
Carburetor Holder Set with gaskets for stock XS400 1977-81.
Replaces hardened and cracked carb holders.
OEM reference numbers
2A2-13586-00-00 LH
2A2-13596-00-00 RH
1L9-13556-10-00 intake manifold gaskets
OEM Reference #
• 2A2-13586-00-00
• LH
• 2A2-13596-00-00
• RH
Plastic Carb Float Mikuni BS34 CV carburetors
Plastic Carb Float - Fits: 1980-84 XS650 Stock 34mm. Mikuni CV Carbs.
Also replaces Brass float used on early 1980 XS650 "Specials".
OEM Ref.# 3H5-14985-00
Also fits:
XS400 J/K Maxim 82-83
XS400 RJ/RK SECA 82-83
XS1100 G 80-81
OEM Reference #
• 256-14919-00-00
• 3H5-14985-00
Carb Slide & Diaphragm Assembly 1980-84 Mikuni BS34 CV carburetors
Carb Slide & Diaphragm Assembly. - Fits: Mikuni BS34 CV Carbs as used
on 1980-84 XS650's OEM Ref.# 3F7/3H5-14940 - Mikuni Genuine
Also fits: SR250 Exciter 80-82, XS400 SE 82, XS400 G 80, XS400 H 81, XS400 SH/SJ 81-82, XS400 J 82, XS400 K Maxim 83, XJ900 RK Seca 83, XJ1100 Maxim 82, XS1100 G/H/LG/LG/SG/SH 80-81
OEM Reference #
• 3F7-14940-00
• 3H5-14940-00
Fuel Petcock Repair Kit 1979-83 XS650 and more
Kit contains o rings and diaphragms to rebuild one fuel petcock. Does not include plastic diaphragm spacer block.
Yamaha XS650 F, 2F, G, H, Special II, Heritage, 78-83.
XS400 E, F, 2F, G, H, 78-81, SG/SH Special 80-81
XJ700 N/NC/S Maxim 85-86
XS750 SE after frame 311211 78, XS750SF 79,
XS850 80-81
XJ900 83-85
XJ900R SECA 83
Kawasaki: KZ650 B3 79, KZ650 E1/F1 80, KZ650 H2?h3 CSR 82-83, KZ700 A1 84, KZ750 80-83, KZ1000 K1/K2 81-82, KZ1000 M1/M2 81-82, KZ1000 P1/P2 82-02, KZ1000 P24 05, KZ1100 82-85
Yamaha XS650 F, 2F, G, H, Special II, Heritage, 78-83.
XS400 E, F, 2F, G, H, 78-81, SG/SH Special 80-81
XJ700 N/NC/S Maxim 85-86
XS750 SE after frame 311211 78, XS750SF 79,
XS850 80-81
XJ900 83-85
XJ900R SECA 83
Kawasaki: KZ650 B3 79, KZ650 E1/F1 80, KZ650 H2?h3 CSR 82-83, KZ700 A1 84, KZ750 80-83, KZ1000 K1/K2 81-82, KZ1000 M1/M2 81-82, KZ1000 P1/P2 82-02, KZ1000 P24 05, KZ1100 82-85
Fuel Petcock Repair Kit 1978 XS650 and more
Kit contains o rings and diaphragms to rebuild one fuel petcock. Does not include plastic diaphragm spacer block.
Yamaha XS650 E 78
XS360 C, D, 2D 76-77
XS400 D 77
SR500 E/F/G/H 78-81
SR500 82-84, 88, 91-93
XS500 E 78
XS750 D/2D/E/F 77-79
XS1100 E/F/G/H 78-81
Yamaha XS650 E 78
XS360 C, D, 2D 76-77
XS400 D 77
SR500 E/F/G/H 78-81
SR500 82-84, 88, 91-93
XS500 E 78
XS750 D/2D/E/F 77-79
XS1100 E/F/G/H 78-81
Carburetor Float Valve (Needle & Seat) Mikuni BS34 CV carbs
Carburetor Float Valve (Needle & Seat) - Push in type with O-Ring seal, needle & clip.
Fits: XS650G/H/SH/SJ/SK/SL (1980-84) stock Mikuni BS34 CV carburetors.
Also fits:
XS400 G/H Special 80-81, XS400 SG/SHSpecial 80-81, XS400 SG Heritage Special 82
XJ550 81-83
XS1100 G/H/LG/LH Midnight Special 80-81, SG/SH Special 80-81
XJ1100J Maxim 82
FJ600L/LC/N/NC 84-85
OEM Reference #
• 3L1-14190-20
• 25G-14107-20
Carb Slide Diaphragm XS400 XS500 XS750 XS1100
Carb Slide Diaphragm for stock carburetors: XS400 D/E/2E/F/2F 1977-79, XS400 SE 1982, XS400 G 1980, XS400 H 1981, XS400 SH/SJ 1981-82, XS400 J 1982, XS400 K 1983 Maxim
Also fits: XS500 1978-79, XS750 E/F 1978-79, XS750 SE/SF Special 1978-79, XS1100 E/F 1978-79, XS1100 SF Special 1979
OEM Reference #
• 2F3-14940-00-00
• 2A2-14940-00-00
Float Needle XS360 XS400 XS650 XS750 XS1100 +
Float Needle
Fits: XS360 1976-77, XS400 1977-79, RD400 77 (OEM 1J7-14190-20-00), XT500 76-79 and 88, XS650 77-80, XS750 77-79, XS1100 78-79, RD250 LC 82, RD350 LC 82
Kawasaki: KZ1000 A1/A2 77-78, KZ900 A4-A5 76-77, KZ900 B1 LTD 76, KZ1000 Di Z1R 78, KZ1000 A3-A4 MKII 79-80, KZ1000 B1/B2 LTD 77-78, KZ1000 B3/B4 LTD 79-80, KZ1000 D3 Z1R 80, KZ1000 E1/E2 Shaft S 79-80
Suzuki: GS550 B/C/EC 77-78, GS550 N/EN/LN 79, GS750 B/C/EC 77-78, GS750 N/EN/LN 79, GS850 GN 79, GS1000 C/EC/N 78-79, GS1000 EN/LN/SN 79
OEM Reference #
• 1J7-14190-20
Gasket - Float Bowl 1980-84 stock BS34 Mikuni CV carburetors
Gasket - Float Bowl - Fits: 1980-84 XS650 Stock 34mm. Mikuni CV Carbs. XS650 SE/SF/SG 78-80.
Oem Ref.# 3F7-14984-00
Also fits: XS400 G/H/SH/SJ 80-82, XS1100 80-81, SR250 80-82
OEM Reference #
• 3F7-14984-00
Float Valve Gasket XS400 XS500 XS750 XS1100
Float Valve Gasket XS400 D/E/F 1977-79
Also fits: XS500 E 1978, XS750 1978-79, XS1100 1978-79
OEM Reference #
• 2A2-14984-01
