Scroll down to see the products
- Drive Chain
- Sprockets
- Discs 77-84
- Gear Levers, Kickstarters, Passenger Pegs, Footrests
- Parts - Brake Calipers 72-76
- OEM Type Rear Brake Parts - (70-84) Models
- Brake Calipers 77-84
- Brake Switches
- OEM Type Brake Hoses, Front Brake Parts for Early (72-76) Models
- Hoses (77-84) Models - Rubber, Stainless
- Front Master Cylinders & Parts
- Custom Rear Master Cylinders
- Handlebars
- Handlebar Grips
- Handlebar Switches
- Cables - Throttle
- Cables - Clutch, Brake, Decompressor, Clutch Brackets
- Cables - Speedometer, Tachometer
- Bar Lever Brackets, Bar Levers
- Wheel Bearings, Wheel Seals, Axels
- Wheel Rims/ Spokes
- Wheel Weights, Tools, Tubes, Rim Strips
- Body Parts - Fenders, Emblems, Side Covers, Gas Tanks, Chain Guards, Rubber mounts
- Rubber Mounts, Rubber Dampers, Rubber Parts, Sidecovers & Sidecover Emblems
- Sidestand / Centerstand Parts
- Seats & Seat Accessories
Sidestand Kit - 4 pc.
Sidestand Kit - 4 pc. kit - Sidestand, Return Spring and mounting Bolt & Nut
Fits: 1970-73 XS/TX650's Only.
Note: Kit for 74-76 not yet available.
Fits: 1970-73 XS/TX650's Only.
Note: Kit for 74-76 not yet available.
Sidestand Spring
Sidestand Spring - Fits: All 1970-76 XS/TX 650's
Sidestand Shoulder Bolt with Castle Nut
Sidestand Shoulder Bolt with Castle Nut
Fits: All 1970-76 XS/TX 650's.
Fits: All 1970-76 XS/TX 650's.
Sidestand Kit - 6 pc.
Sidestand Kit - 6 pc. kit - Sidestand, Return Spring, Sidestand spring Link Plate,
Sidestand Bolt, Washer & locktab.
Fits: All 77-84 XS650's
Sidestand Bolt, Washer & locktab.
Fits: All 77-84 XS650's
Sidestand Stopper
Stopper (Rubber) - Sidestand - Fits: 1978-84 XS650's
OEM Ref. # 1T3-27314-00
OEM Ref. # 1T3-27314-00
Sidestand Spring Link Plate
Sidestand Spring Link Plate - Fits: 1977-84 XS650 sidestand mount.
Sidestand Bolt, Washer & Locktab
Sidestand Bolt, Washer & Locktab - Fits: 1977-84 XS650 sidestand mount.
Center Stand Bolt
Center Stand Bolt - Stainless Steel bolt - ported to put
grease directly to pivot points where its needed and make
the bike easier to pull up on the center.
grease directly to pivot points where its needed and make
the bike easier to pull up on the center.
Center Stand Spring
Center Stand Spring
Fits: All 1970-84 650 Center Stands with single springs.
Plated Finish.
Fits: All 1970-84 650 Center Stands with single springs.
Plated Finish.
Center Stand
Center (Main) Stand
Replaces Stands on All North American 1974-84 models
Also has fittings for Dual return springs as used on European Models.
Replaces Stands on All North American 1974-84 models
Also has fittings for Dual return springs as used on European Models.
Center Stand Stop Rubber fits to stock muffler on 1970-73 XS/TX 650's
Center Stand Stop Rubber fits to stock muffler on 1970-73 XS/TX 650's
Rubber bumper
Rubber Bumper - OEM original Stand stop Rubber - Also for use with aftermarket
muffler center stand stops. 1" Dia x 9/16" Long - Fits into 3/8" (10mm) Hole
OEM Ref. # 278-27114-00/01/A0, 371-27114-00-00
Used on All TX/XS650's 1974-84 - (Some models use 2 pc.)
Rubber bumper is mounted to muffler and/or frame.
muffler center stand stops. 1" Dia x 9/16" Long - Fits into 3/8" (10mm) Hole
OEM Ref. # 278-27114-00/01/A0, 371-27114-00-00
Used on All TX/XS650's 1974-84 - (Some models use 2 pc.)
Rubber bumper is mounted to muffler and/or frame.