Mikes XS

Front fork Damper Valves (Pr/2) Fits: 35mm. forks on 1977-84 XS650's. Tuneable Valves are installed on top of the front fork dampening rods and below the fork springs. The adjustable Damper Valve make rod style fork dampers perform like modern cartridge style forks. “The Best suspension upgrade modification for the XS650” Note: Damper rod drilling required. Photo install instructions included.

OEM Reference #
• 1T3-23170-00-00

Fork Seal Kit.

Fits:
XS400D/E/2E/F/2F 77-79
XS400G/H Special
XS400SG/SH/SJ Special
XS360 C/D/2D 76-77

Fork Seal Kit

Fits:

RZ350 L/N?NC/NCII 84-85
XS400 J/K Maxim 82-83
XS400 RJ/RK SECA 82-83
XS500 C/D/E 76-78
XS750D 77

Extended Fork Tube Set/2 ( + 2" over stock length ).
35mm. OD Fork Tubes to fit All 1977-84 650's.

Extended Fork Tube Set/2 (+ 6" over stock length).
35mm OD Fork Tubes to fit All 1977-84 650's.

Fork Tube Set(2) - Replace those Worn/Damaged Fork tubes with our New Tubes & restore your front end to proper function & appearance. Fits: XS2 (1972) and TX650 (1973) OEM Ref. # 306-23124-60-00 34mm. OD

OEM Reference #
• 306-23124-60-00
• 306-23124-60-00

Fork Tube Set(2) - Replace those Worn/Damaged Fork tubes with our New Tubes & restore your front end to proper function & appearance. Fits: TX650A (1974) and XS650B/C (1975-76) OEM Ref. # 533/371-23124 34mm. OD

OEM Reference #
• 533-23124-31-00
• 371-23124-62

32mm. 6 point Box Wrench - chrome plated steel. Also has 39mm. size.

Fork Tube Caps - Set/2 - Stock Chromed Steel OEM type Caps Fit: 34mm fork tubes on - XS1/XS1b/XS2 (1970-72) OEM Ref. 256-23111-60-00 Caution! Fine thread, use care when installing.

OEM Reference #
• 256-23111-60-00

Fork Tube Caps - Set/2 - Stock Aluminum OEM type Caps Fit: 34mm. fork tubes on TX650A (1974) & XS650B/C (1975-76). Replaces OEM # 341-23111-50/51 Note: Use Fork Cap Tool (17mm. Hex) #35-1081 to remove or install. Caution! Fine thread, use care when installing.

OEM Reference #
• 341-23111-50
• 341-23111-51
• 341-23111-51-00

Fork Tube Caps - Set/2 - Stock Steel OEM type - Flat bottom no preload adjuster. Caps Fit: 35mm. fork tubes on XS650D (1977) and also fit to all 1978-84 fork tubes Recommended type for 77-84 models using our 27-1088 progressive type fork springs and/or our fork damper valves #27-1086. OEM Ref.# 1T3-23111-50-00 Note: Use Fork Cap Tool (17mm. Hex) #35-1081 to remove or install. Caution! Fine thread, use care when installing.

OEM Reference #
• 1T3-23111-50-00

Fork Tube Caps - Set/2 - Stock Aluminum type but with No preload adjuster. Caps Fit: 35mm. fork tubes on XS650's 1977-84. Replaces troublesome adjustable US model Cap used on 1978-84 650's Note: Adjustable caps were never used on 650's outside of North America. 22mm. Hex top Caution! Fine thread, use care when installing.

OEM Reference #
• 2F0-23111-50-00
• 3J2-23111-00-00

17mm. Hex (Allen) bit Tool to remove fork tube top caps. Fits: Fork caps on TX650A (1974), XS650BC (75-76) and 1977D (version without preload adjuster). A perfect fit to remove those soft alloy fork tube caps without damage.

OEM Reference #
• 341-23111-50
• 341-23111-51
• 1T3-23111-50-00

22mm. 12 Point Fork Cap Wrench. Removes alloy fork Tube Caps.
Fits: TX650 (1973), XS650 (1978-84).

Fork Oil Level Gauge for adjusting the oil level on all XS650 forks.
Adjustable ring measures oil levels from 0-300mm. in 50mm. increments.
60ml. capacity syringe adjusts fluid levels.

500cc (1/2 Liter) plastic Graduated Cylinder for accurate measuring of fork oil
and other fluids.

250cc (1/4 Liter) plastic Graduated Cylinder for accurate measuring of fork oil
and other fluids.

Performance Progressive wound Front Fork Springs - Fits: 34 mm. stock forks on TX650A (1974) and XS650B/C (1975-76). Springs Improve handling while retaining OEM geometry. Stops front end droop and diving during braking while improving cornering stability. Progressive design combats bottoming in harsh conditions by increasing resistance as spring compresses. 23mm. Dia. x 495mm. long. Made in Germany

OEM Reference #
• 256-23141-62-00

Replacement for Standard Fork Springs
Front Fork Springs - Fits:XS650 1977-84 with stock 35mm. forks.
Springs Improve handling while retaining OEM geometry.
Stops front end droop and diving during braking while improving cornering stability.
24mm. Dia. x 484mm. long

Damper retaining bolts. Fits into lower fork leg to inner fork damper. Special size allen socket head. Fits: XS650's 1977-84

OEM Reference #
• 1T3-23181-50-00

Damper Bolt Sealing Washers - copper (Pr.) - Fits under allen socket head damper retaining bolts (Lower fork leg to inner dampers).

OEM Reference #
• 509-23158-LO

Damper Bolt Driver - Deep type damper bolt driver used to air
impact recessed damper bolts from lower fork legs.

Fork Tube Cap O-Ring (Pk/2) for 35mm. Forks Fits: All XS650's 1977-84

OEM Reference #
• 2F0-23114-00-00
• 1T3-23111-50
• 3J2-23114-00-00

Fork Seal Set - 35 x 48 x 10.5/11 - Fits: 1977-84 XS 650's (35mm Fork Tubes). Made In Japan by OEM supplier. Also fits: TZ350 76-78, RD400 F 79, SR500 78-81, TX750 73-74

OEM Reference #
• 1T3-23145-00

Fork seal Spring Clips (Pk./2) - These clips fit into the groove above the fork seals in the lower fork legs. Fits: All 1977-84 650's

OEM Reference #
• 341-23156-50
• 1T3-23145-00-00

Fork seal Washers Fit on top of Fork Seals and below the spring clips in the lower fork legs. Fits: All 1977-84 650's

OEM Reference #
• 341-23146-50
• 341-23145-50-00

Fork seal Dust Covers (Pk/2) - Fits: 1977-84 XS650D-K (35mm. fork tubes).

OEM Reference #
• 1T3-23144-50

Fork Tube Cap O-Rings (Pk/2) for 34mm. Forks Fits: XS1/XS1b/XS2/TX650/TX650A/XS650B/XS650C (1970-76)

OEM Reference #
• 214-23114-00-00

Fork Seal Set - 34 x 46 x 10.5 - Fits: 1970-76 TX/XS 650's (34mm fork Tubes). Made In Japan by OEM Supplier. Also fits: DT250 74-78, DT250 MX 77-78, RD250 73-75, RD350 73-75, DT400 75-78, DT400 MX 77-79, RD400 76-78, TX500 73-74, XS500 75

OEM Reference #
• 278-23145-51
• 584-23145-50-00

Fork seal Dust Covers (Pk/2) - Fits: 1971-76 XS/TX650's (34mm. fork tubes).

OEM Reference #
• 278-23144-50
• 584-23144-50-00

Fork Gaitors (Pr.) for 1970 XS1 650 but adaptable to All 1971-84 models (remove stock dust covers). Give your 650 that "British" look. Provides great fork protection. 1970 models had a lip piece on the lower triple tree on which to clamp the boot, for later models simply insert a piece of split rubber rad hose inside and clamp the upper part of the boot to the fork tube. We suggest a breathing hole be punched on a lower pleat also (face to rear) to allow venting of air.

OEM Reference #
• 51611-300-000
• 278-23144-50-00

Cap (Fork Tube Top Cap/Rubber Plug) -Pk/2 - Original type as used on 1977-84 XS650's.

OEM Reference #
• 2F0-23168-60-00
• 4X7-23168-00-00

Cap (Fork Tube Top Cap/Rubber Plug) -Pk/2 - Original type as used on 1974-76 TX/XS650's.

OEM Reference #
• 371-23168-60

Fork Brace - Stiffens front end, improves handling. Precision Steel
construction, Chrome plated finish. Fits:1977-84 650's. (over fender).