Mikes XS

PERFECT GAS TANK FOR YOUR RETRO CAFE PROJECT, CLASSIC OR RACE BIKE. FLAWLESSLY FINISHED...PAINTABLE 3 1/2 GALLON CAPACITY WITH QUALITY, CHROME AIRCRAFT STYLE GAS CAP. INTERNALLY COATED WITH Special UL Listed ETHANOL FUEL PROOFER. 1/4" NPT TAPPED ON BOTH SIDES FOR PETCOCKS. These tanks are not DOT approved for road use, therefore they are intended for racing or offroad use only.

IF NEEDED, PETCOCK PART NUMBER 20-0023

Gas Cap Yamaha XS1 XS2 with Latch Lever

OEM Reference #
• 256-24611-00-00

Kit contains o rings and diaphragms to rebuild one fuel petcock. Does not include plastic diaphragm spacer block.

Yamaha XS650 F, 2F, G, H, Special II, Heritage, 78-83.
XS400 E, F, 2F, G, H, 78-81, SG/SH Special 80-81
XJ700 N/NC/S Maxim 85-86
XS750 SE after frame 311211 78, XS750SF 79,
XS850 80-81
XJ900 83-85
XJ900R SECA 83

Kawasaki: KZ650 B3 79, KZ650 E1/F1 80, KZ650 H2?h3 CSR 82-83, KZ700 A1 84, KZ750 80-83, KZ1000 K1/K2 81-82, KZ1000 M1/M2 81-82, KZ1000 P1/P2 82-02, KZ1000 P24 05, KZ1100 82-85

Kit contains o rings and diaphragms to rebuild one fuel petcock. Does not include plastic diaphragm spacer block.

Yamaha XS650 E 78

XS360 C, D, 2D 76-77
XS400 D 77
SR500 E/F/G/H 78-81
SR500 82-84, 88, 91-93
XS500 E 78
XS750 D/2D/E/F 77-79
XS1100 E/F/G/H 78-81

Universal type petcock. Flat lever 1/4"x1/4" with filter and locknut (with tube).

Fits Legendary Cafe Tank Part number 64-7701

Petcock, non-vacuum fuel valve. , DS7, RD250, RD350 1973-75, LC350 1980-82. Center to center hole is 34mm

OEM Reference #
• 1A0-24500-02-00

Rubber Seal for XS1 Cap Seal

Steel Fuel Tank - 3.9US gallon (15 litre) " Standard" type
Includes chrome gas cap with keys. Tank is painted Black with Gold stripes
(No Yamaha Name) and is patterned after the original 1977D model. Tank uses two petcocks part 20-0019

Does not include petcocks.

Fits: Any 1974-84 XS/TX650.

Gas Cap with keys - Fits: 1976-79 XS650 "Standard" models and our 64-7700 and 64-7702 Fuel Tanks. Note: Caps from "Standards" and "Specials" do not interchange. Also fits: RD400 76-80, SR500 78-79, XS750 77-79, XS850 80

OEM Reference #
• 584-24602-00
• 1E7-24602-00

Fits: 1978-84 Yamaha XS650 "Specials" Note: Caps from "Standards" and "Specials" do not interchange. Will work with other Specials models: XS400 Specials, XS750 Specials, XS850 Specials, XS1100 Specials, and SR500 OEM reference #306-81862-10-00

OEM Reference #
• 306-81862-10-00

Gas cap Rubber Seal - Fits: All 1976-84 XS650 gas caps.

Gas cap Rubber Seal - Fits: All 1974-75 Yamaha XS650 TX650 gas caps. Oem Ref.# 341-24612-01

OEM Reference #
• 341-24612-01-00
• 256-24612-00-00

Gas Tank Mount Rubber - Front - Fits: All 650's 1970-84

OEM Reference #
• 3TB-24181-00
• 156-24181-00

Gas Tank Mount Rubber - Rear - Fits: All 650's 1970-84

OEM Reference #
• 256-24181-01

Petcock - Left Hand.- Original Non-Vacuum Manual type - (3 screw rear cover) Includes: Tap to Tank O-Ring. Replaces All original Left non-Vacuum types used on 1970-77 Yamaha XS1 XS2 XS650's. Holes are 42.5mm apart. This petcock will not fit 64-7700 gas tank.

OEM Reference #
• 447-24500-02

Petcock - Right Hand - Original Non-Vacuum Manual type - (3 screw rear cover) Includes: Tap to Tank O-Ring. Replaces All original Right non-Vacuum types used on 1970-77 Yamaha XS1 XS2 XS650's Holes are 42.5mm apart This petcock will not fit 64-7700 gas tank.

OEM Reference #
• 447-24510-02

Tap to tank Mount Screws(2) and Sealing Washers(2) - Fits: All XS650's 1970-84.

OEM Reference #
• 256-24143

This product is temporarily out of stock.

Sealing Washers for Tap to Tank Mount Screws. Fits: Under mount screws on 1970-84 XS650's

OEM Reference #
• 90202-05187-00

Petcock Mount O-Ring - (Tap to Tank O-Ring) - Fits: Petcocks on 1970-77 650's

OEM Reference #
• 256-24512-00

Petcock Rebuild kit - Fits: TX650/A 1973-74, XS650B/C/D 1975-77 These petcocks have a 3 Screw Rear cover plate. Kit contains: 1pc. Valve Rubber, 1pc. Wave Washer, 1pc. Tap to tank O-Ring, 2pc. Tank bolt Washer, 1pc. Drain screw Gasket, 1 pc. Rear cover Gasket ( 3 Screw type ).

OEM Reference #
• 137-24523-00
• 132-24518-00
• 256-24512-00
• 90202-05187
• 801-24437-00
• 447-24522

Petcock Rebuild kit - Fits: XS1/XS1B/XS2 1970-72 - These petcocks have a 2 Screw Rear cover plate. Kit contains: 1pc. Valve Rubber, 1pc. Wave Washer, 1pc. Tap to tank O-Ring, 2pc. Tank bolt Washer, 1pc. Drain screw Gasket, 1 pc.Rear cover Gasket (2 Screw).

OEM Reference #
• 137-24523
• 132-24518-00
• 256-24512-00
• 90202-05187
• 801-24437-00
• 256-24522-00

Petcock Rear Cover Gasket - (3 Hole) Fits: TX650 XS650's - 1973-77 + our #20-0019 petcocks. OEM Ref.# 447-24522-00

OEM Reference #
• 447-24522-00

Petcock Rear Cover Gasket - (2 Hole) Fits: TX/XS650's (usually on 1970-72). OEM Ref.# 256-24522-00

OEM Reference #
• 256-24522

Petcocks - Non Vacuum type to replace 1978-84 vacuum type Also fits SR500, 79 XS750 Special All 1978-84 North American market 650's have original petcocks operated by Vacuum from a line to the intake (on carb holder). 1978-79 models have 2 and 1980-84 models have 1 petcock. Vacuum petcocks are chronic leakers and are all getting to the point of being non-repairable. Our petcock is the Early type 650 manual petcock with a wider flange cast on it so it will fit in place of the vacuum types. Our Petcock fits to right or left and each comes with the tap to tank O-Ring seal and assorted outlet fittings ( petcock has 2 outlet ports). Fittings included: 2 ninety degree, 1 Straight fitting & 1 outlet port Plug. There is an "ON", "OFF" and "Reserve" position. Holes are 46mm apart center to center

OEM Reference #
• 447-24500-02-00

O-Ring - Replacement Tap To Tank O-Ring for #20-0019 manual petcock

OEM Reference #
• 256-24512-00-00

Blind Plug - Carb Holder Air Barb - OEM Ref.# 1J7-13569-00. Also called carburetor rubber passage plug. Fits: 1978-84 XS650 stock carb holders & blocks off air barbs when vacuum petcocks are replaced with manual type petcocks. Order quantity needed. Also fits: XS1100 80-81 Fits: All Mikes XS Carb Holders and Carb Holders for Keihin Flatslide PWK 32mm XS Performance Carb Set for XS650. Note: Each carb holder requires 1 Blind Plug.

OEM Reference #
• 1J7-13569-00

Petcock fuel pipe Filter Set(2) - Fits: Over petcock fuel pipes up inside gas tank.
Filter Set - Replacements for #20-0019 petcocks and will also fit 1970-77 XS1 XS2 XS650 stock
petcocks.

*** Note - These it our petcocks we sell, not OEM Petcocks *****

This product is temporarily out of stock.

Petcock 90 degree outlet Fitting - Replacement fitting - Fits: XS650 Petcocks -
#20-0019/0050/0051 Use as Required (Not original on 20-0050/51).

Temporarily out of stock - expected delivery June 2013

Petcock Filter with attached filter screen.
Fits: Original Yamaha manual Petcocks Only.

Fuel Line T - Fits: 5/16" ID fuel line (8mm).
Ideal for linking output from two fuel petcocks into one.

Wire Spring type Hose Clamp. 0.35" (9mm.) inside Diameter size (unexpanded)
in packs of 10pc. Best Size to fit Standard XS petcocks using 20-4009/10
black rubber fuel line.

Black Rubber Fuel Line - (original thin wall type) 1/4" ID (6mm.) - 1pc. x 11.5"

Black Rubber Fuel or Vent Line - ( original thin wall type ) 3/16" (4.5mm.) ID x
11.5"

Fits: Keihin Flatslide PWK 32mm. XS Performance Carbs for XS650.

Note: Each Carb requires 1 pc. to go to each fuel feed (Petcock).

Wire Spring type Hose Clamp. 3/16" (4mm.) inside Diameter size (unexpanded)
in packs of 10pc. Suitable for small carb vent hose.

Wire Spring type Hose Clamp. 1/4" (6mm.) inside Diameter size (unexpanded)
in packs of 10pc. Suitable for matching small fuel or vent hose.

Wire Spring type Hose Clamp. 5/16" (8mm.) inside Diameter size (unexpanded)
in packs of 10pc. Suitable for matching fuel or vent hose.

Clear square inline Fuel Filter.

Brass Carb Fuel Line T-Piece & rubber seals(2) - ( Fuel supply T pipe that fits between carbs). Replaces plastic coated pot metal stock fuel T that fits between stock Mikuni BS 34mm. CV carbs used on North American Market 1980-84 XS650's. Fits: 80-84 34mm. CV carbs. 9mm, approximately 3/8" Note: Carbs will have to be detached from each other to install and we suggest you replace the link bar screws that join the 2 carbs together as originals are usually difficult to remove without Note: Fuel T 48-0884 is a pressed together assembly and must be handled/installed with care.

OEM Reference #
• 3G1-14988-00-00

Replacement Rubber T Seals for Brass fuel Line

Stainless Steel carb link bar Screws - Set of 4 with socket (Allen) heads.

Link bar screws hold carbs together (on the carb support brackets) and often
need replacing when changing the fuel line T on stock 80-84 BS34 CV carbs.