Mikes XS

Brass Carb Float - Fits: 1970-79 XS/TX650 Stock BS38mm. Mikuni CV Carbs. Minor bending may be needed to align properly. Oem Ref.# 256-14985-00 Also fits XS500C 76, TX 750 A 73-74

OEM Reference #
• 256-14985-00
• 127-14186-00

Carb float set - plastic. Float and pin. For OEM Mikuni BS38 CV carburetors. XS1/XS1B/XS2 70-72, TX650 A 73-74, XS650 B/C/D/E/F 75-79, XS650 SE/SF/SG 78-80, XS650 2F 79, TX750 A 73-74 made in Japan

OEM Reference #
• 256-14985-00
• 127-14186-00
• 137-14186-00

Float Hinge Pin for stock Mikuni BS38 CV Carburetors as used on 1970-79 XS/TX650's

OEM Reference #
• 124-14186

Gasket - Float Bowl - Fits: 1970-79 XS/TX650 Stock 38mm. Mikuni CV Carbs. XS1/XS1B/XS2 70-72. OEM Ref.# 256-14984-00 Also fits: XS360 C/D/2D 76-77, XS500 C/D 76-77, TX650 A 73-74, TX750 A 73-74. XS750 D/2D 77

OEM Reference #
• 256-14984-00

Float Bowl Drain Plug - Fits:1970-79 Stock 38mm. Mikuni CV Carburetors.

OEM Reference #
• 256-14991-00-00

Carb Float Valve (Needle & Seat) - threaded type. Fits: XS2 (1972), TX650/A (1973- 74), XS650B-F (1975-79) with stock Mikuni BS38 CV Carburetors Also fits: RD250 (DS6) and RD350 (R5) 70-72 OEM 168-14190-20-00, XS500 C/D 76-77, TX750A 73-74, XS1100 78-79

OEM Reference #
• 168-14190-20
• 1J7-14190

Carburetor Float Valve (Needle & Seat) - threaded type - Fits: XS1/XS2 (1970-71) 650's BS38 Mikuni (Solex)

OEM Reference #
• 168-14190-25
• 23L-14107-25

Float Bowl Screws - 4mm. - ( Pk./4 Screws with lockwashers). Fits: Early Mikuni CV carb float bowls.

OEM Reference #
• 98517-04012-00

Carburetor Choke Plunger - Fits: Stock Mikuni BS38 CV Carburetors as used on 1972-75 XS2/TX650/TX650A/XS650B 650's.

OEM Reference #
• 306-14171-01-00

Carburetor Choke Plunger - Fits: Stock Mikuni BS38 CV Carburetors as used on 1970-71 XS1/ XS1b 650's OEM Ref.# 603-14171-00

OEM Reference #
• 603-14171-00

Plastic Carb Float - Fits: 1980-84 XS650 Stock 34mm. Mikuni CV Carbs. Also replaces Brass float used on early 1980 XS650 "Specials". OEM Ref.# 3H5-14985-00 Also fits: XS400 J/K Maxim 82-83 XS400 RJ/RK SECA 82-83 XS1100 G 80-81

OEM Reference #
• 256-14919-00-00
• 3H5-14985-00

Float Hinge Pin for stock Mikuni BS34 CV Carbs as used on 1980-84 XS650's

OEM Reference #
• 537-14186

Gasket - Float Bowl - Fits: 1980-84 XS650 Stock 34mm. Mikuni CV Carbs. XS650 SE/SF/SG 78-80. Oem Ref.# 3F7-14984-00 Also fits: XS400 G/H/SH/SJ 80-82, XS1100 80-81, SR250 80-82

OEM Reference #
• 3F7-14984-00

Carburetor Float Valve (Needle & Seat) - Push in type with O-Ring seal, needle & clip. Fits: XS650G/H/SH/SJ/SK/SL (1980-84) stock Mikuni BS34 CV carburetors. Also fits: XS400 G/H Special 80-81, XS400 SG/SHSpecial 80-81, XS400 SG Heritage Special 82 XJ550 81-83 XS1100 G/H/LG/LH Midnight Special 80-81, SG/SH Special 80-81 XJ1100J Maxim 82 FJ600L/LC/N/NC 84-85

OEM Reference #
• 3L1-14190-20
• 25G-14107-20

Float Needle with clip - Fits: XS650G-K 1980-84 Stock 34mm. Mikuni CV Carburetors
- Viton tipped Needle & clip Only!

Also fits: SR250 80-82, XS400 G/H Special II 80-81, XS400 SG/SH/SJ Special 80-82, XV750 88-95, XV1100 88-97, XS1100 80-81,

Screws - 5mm.- Early Mikuni BS38 CV carb Lid Screws with lockwashers and Late 34mm CV Bowl Screw Pk./4

OEM Reference #
• 98507-05014-00

Float Bowl Drain Screw with O-Ring - Fits: 80-84 Stock 34mm. Mikuni CV Carbs.

OEM Reference #
• 1A8-14991-00-00
• 93210-04230-00

Rubber pilot jet Passage Plug (Pk./2) Fits: XS650G/H/SH/SJ/SK/SL (1980-84)
Stock Mikuni BS34 CV Carburetors. Used inside float bowl to seal passage to pilot
Jet - 1 used per carb

Carburetor Choke Plunger - Fits: Stock Mikuni BS38 CV Carburetors as used on 1976-79 XS650C/D/E/SE/F/2F/SF

OEM Reference #
• 584-14171-00

Carb Choke Plunger - Fits: Stock Mikuni BS34 CV Carburetors as used on
1980-84 XS650's.

Replacement Choke Lever Assembly for the stock Mikuni BS38 CV carburetors as used on all 1972-79 TX/XS650's

OEM Reference #
• 256-14905-00-00

Choke Plunger Dust Seal - Fits: 1980-84 XS650 BS34 CV Carb Choke Plunger

OEM Reference #
• 306-14173-00-00

This product is temporarily out of stock.

Choke Plunger Dust Seal - Fits: 1970-79 XS650 BS38 CV Carb Choke Plunger

OEM Reference #
• 802-14173-00-00
• 306-14173-00-00

Carburetor Choke Body Gasket - 7 Hole - Fits: TX650A, XS650B (74-75) Stock Mikuni
BS38 CV Carburetor.
Note: 1970-73 650's did not use a choke body gasket

Carburetor Choke Body Gasket - 8 Hole - Fits: XS650C/D/E/F/2F/SF (1976-79) Stock Mikuni BS38 CV Carburetor. Note: 1970-73 650's did not use a choke body gasket.

OEM Reference #
• 447-14979-00

This product is temporarily out of stock.

Carburetor Repair Kit. XS400 1980-82, XS750 E/F/SF 1978-79, XS750 SE 1980, XS1100 1980, XS1100 SE 1981
Includes float needle assembly, chamber gasket and O rings.

Float Valve Gasket XS400 D/E/F 1977-79 Also fits: XS500 E 1978, XS750 1978-79, XS1100 1978-79

OEM Reference #
• 2A2-14984-01

This product is temporarily out of stock.

Carb Float Set. XS400 1977-79, XS500 1978, XS750 1978-79, XS1100 1978-79

OEM Reference #
• 2A2-14985-00
• 537-14186-00

Float Needle Fits: XS360 1976-77, XS400 1977-79, RD400 77 (OEM 1J7-14190-20-00), XT500 76-79 and 88, XS650 77-80, XS750 77-79, XS1100 78-79, RD250 LC 82, RD350 LC 82 Kawasaki: KZ1000 A1/A2 77-78, KZ900 A4-A5 76-77, KZ900 B1 LTD 76, KZ1000 Di Z1R 78, KZ1000 A3-A4 MKII 79-80, KZ1000 B1/B2 LTD 77-78, KZ1000 B3/B4 LTD 79-80, KZ1000 D3 Z1R 80, KZ1000 E1/E2 Shaft S 79-80 Suzuki: GS550 B/C/EC 77-78, GS550 N/EN/LN 79, GS750 B/C/EC 77-78, GS750 N/EN/LN 79, GS850 GN 79, GS1000 C/EC/N 78-79, GS1000 EN/LN/SN 79

OEM Reference #
• 1J7-14190-20