Mikes XS

Standard quality 53mm. motorcycle Pod Air Filter - Tapered Oval style with Chrome end cap.
Takes the place of 52mm and 54mm sizes.
Pod is an improved replica (Dyno & flow bench developed) of the most popular
brand on the market. Features molded in internal stack, no step rubber mount
flange and Chrome end cap. Filter is supplied dry but washable filtration
material may be oiled for improved dust filtration.
(2.75") deep x 74 mm. (2.91") wide x 85 mm. (3 3/8") high (at base). The flange does not block the openings in the stock carbs as other standard pod filters do.
Yamaha, Suzuki, Kawasaki, Honda.
Fits: 1980-84 stock Mikuni BS34 CV Carbs + some Mikuni TM aftermarket carbs.
Fits: Flatslide PWK 32mm. XS Performance Carb Set for XS650
Note: Each kit requires 2 filters.
Compatible with XS400Pod fits to velocity stack on Dellorto PHF36 carbs

57mm. (2 1/4") XS Performance motorcycle Pod Air Filter - Tapered Oval style w chrome end cap.
Pod is an improved replica (dyno and flow bench developed) of the most popular
brand on the market.
Features - Molded in internal velocity stack.
- No step rubber mount flange and chrome end cap.
Filter is supplied dry but washable filtration element may be oiled for enhanced
dust filtration. Filter body is 2 3/4" Deep x 3 3/4" Wide x 4 1/2" High (at base).


Fits: Mikuni VM34 aftermarket roundslide carbs.

Note: Always measure the external diameter of the carb mouth to confirm size
needed. Most pods easily fit plus or minus 1/16" from size indicated.

Yamaha, Suzuki, Kawasaki, Honda.

52mm (2.0") Oval tapered Pod Air Filter for motocycles. High quality, good looking filter at a great price.

Fits: Aftermarket carbs, such as Mikuni and Keihin. DOES NOT WORK with stock CV Carbs without cutting the interior lip which blocks the slide lift and carburetor vent holes. We DO NOT recommend them for CV carbs. Will work with Honda OEM and other carbs that do not have the slide lift and carburetor vent holes in the air filter attachment area.

Also Fits: Yamaha: SR500, TT500, XT500, XJ650, XJ900, XS750 & XS850 &XS1100 through 1979
Honda CB400 N/T, CB650 Z, CB750 K
Kawasaki KZ250, KZ400 B/G/L, ZR400, KZ440 A/C/D/H, KZ550 G/H, GPz550, ZR550, KZ650
Suzuki GS400 S, GSX400 E/F/L, GT500, GS550 E/M, GT750

54mm (2 1/8") Tapered oval Pod Air Filter for motorcycles. High quality good looking filter at a great value.

Fits: Aftermarket carbs, such as Mikuni, Keihin, and our PWK car kit DOES NOT WORK with stock Mikuni BS34 CV Carbs without cutting the interior lip which blocks the slide lift and carburetor vent holes. We DO NOT recommend them for CV carbs. Will work with Honda OEM and other carbs that do not have the slide lift and carburetor vent holes in the air filter attachment area.
Fits: Flatslide PWK 32mm. XS Performance Carb Set for XS650
Note: Each kit requires 2 filters.

Carb Holder band Clamp - 56-61 mm. range. Fits carb holders for stock Mikuni BS 38 CV carbs as used on North American 1970-79 XS/TX650's

OEM Reference #
• 90460-58015
• 90450-58002-00

Genuine K&N Universal motorcycle Air filter. Sold each.

3" outside diameter, 4" long, 5/8" flange length, offset flange.

Note: legal in California only for racing vehicles.

Yamaha XS650
Also compatible with XS400, XS850 80-81, XS1100 78-83. Order one per carb.

Genuine K&N universal clamp on air filter for Mikuni and Keihin motorcycle carburetors.
Mounting flange inside dimension 2 1/4", filter outside diameter 3.5", 5" long, flange length 5/8", 5 degree angled flange.

Works with Mikuni and Keihin carbs sold on Mikes XS.
Does not work with the XS Performance carb kit 48-9010.
Works with 48-8100.

K&N OE Replacement Filter YA-1152. Sold each.

3" wide by 4" long, 2.25" tall.

XS650 C/D/E/F/2F/SE/SF 76-79

Air filter - XS360 XS400 76-82. Does not fit Maxim or Seca models. Also Fits XS250 78-82

OEM Reference #
• 1L9-14451-00

Air filter - XS400R, Seca, Maxim 82-83

48mm universal clamp on air filter XS400 SE 78-82

Fits: Yamaha: XS250 SE 78-81, XS400 SE 78-82, XT500 76-80
Honda: CB250 N/RS, CB400 N, CBX550
Kawasaki: KZ250 A/B, GPz305, GPz400
Suzuki: GS250 T/E, GSX250, GSX400 E,GS400, GS450

Carburetor Holder Set with gaskets for stock XS400 1977-81. Replaces hardened and cracked carb holders. OEM reference numbers 2A2-13586-00-00 LH 2A2-13596-00-00 RH 1L9-13556-10-00 intake manifold gaskets

OEM Reference #
• 2A2-13586-00-00
• LH
• 2A2-13596-00-00
• RH

Carburetor Holder SR500 E/F/G/H 1978-81. Replace your worn and cracked carb holders. Includes one carb holder and one intake gasket. Also fits: TT500 C/D/E/F/G/H 1976-81, XS500 1976-81, XT500 C/D/E/F/G/H 1976-81

OEM Reference #
• 583-13565-01-00

Clamp on Air Filter. SR500 1978-83, XT500, XS750 through 1979, XS850 through 1979, XS1100 through 1979

OEM Reference #
• 2J2-14451-00

42mm pod air filter. Universal clamp on type. Sold each.

fits: Yamaha RD250, RD350, RD400, DT100, RS100, RX100
Honda MTX200, XL250RC, CB650F
Kawasaki KL250 A/C, KH400, KZ440, KZ750, KZ900, KZ1000, Z1 A/B,
Suzuki GS125 ES, TS185ER, RG250 Gamma, GT250, GT380, GT550, GS750, GS1000, GS1000 Katana

52mm Universal Clamp on Air Filter

Fits: Yamaha SR500, TT500, XT500, XJ650, XJ900, XS750 & XS850 & XS1100 through 1979

Also fits:
Honda CB400 N/T, CB650 Z, CB750 K
Kawasaki KZ250, KZ400 B/G/L, ZR400, KZ440 A/C/D/H, KZ550 G/H, GPz550, ZR550, KZ650
Suzuki GS400 S, GSX400 E/F/L, GT500, GS550 E/M, GT750

Air Filter XS850 80-82

OEM Reference #
• 4E2-14451-00

Air Filter XS1100 78-84

OEM Reference #
• 2H7-14451-00

This product is temporarily out of stock.

Carb Holder Kit XS750 1978-79, XS850 1980-81 OEM reference 2F3-13586-01-00 *** Pack of 3

OEM Reference #
• 2F3-13586-01-00

Carb Holder Kit, includes 2 LH and RH. XS1100 E/F/G/H 1978-81, XS1100 LH/LH Midnight Special 1980-81, XS1100 SF/SG/SH Special 1979-81

OEM Reference #
• 2H7-13586-00-00
• LH
• 2H7-13596-00-00
• RH

Carb Holder Kit, includes 2 LH and RH. XS1100 E/F/G/H 1978-81, XS1100 LH/LH Midnight Special 1980-81, XS1100 SF/SG/SH Special 1979-81

OEM Reference #
• 2H7-13586-00-00
• LH
• 2H7-13596-00-00
• RH

Plastic Fuel line T (3/16") 6mm.

For splitting fuel line into petcocks/carbs.

Fuel line cut off for quick and easy way to cut off fuel supply when working on your bike. 6mm.

TC Bros XS650 Billet Aluminum Intake Manifolds
Get rid of your cracked and leaking rubber intake manifolds and replace them with our super trick CNC machined billet aluminum racing intakes. These are very sturdy and improve flow to your motor. They are perfect when installing aftermarket carbs. Your stock rubber intakes are not designed to support your carbs without your stock airboxes installed causing them to crack over time. Our aluminum intakes are much stronger and will not crack. Kit includes stainless steel hoseclamps that will never rust. These will fit aftermarket 34-36mm Mikuni VM Roundslide Carbs. Will not fit stock 34mm CV, stock 38mm, or Mikuni 38mm VM Roundslide Carbs. Sold as a pair.

This product is temporarily out of stock.

Carb Holder Set - Fits: Stock Mikuni BS38 CV Carburetors on TX650A 1974 & XS650B/C/D (1975-77) & XS650 80 - Kit Includes 1pc.(RH) #447-13565 & 1pc.(LH) #447-13555 Note: These fit to 1978-79 models carbs but lack the Air barbs that operate the stock vacuum type petcocks.

OEM Reference #
• 447-13565-01
• 447-13555-01

Carb Holder Set - Fits: Stock Mikuni BS34 CV Carbs on 1980-84 XS650's + Kit Includes 1pc. each of carb holders OEM # 3G1-13586 & OEM # 3G1-13596

OEM Reference #
• 3G1-13586
• 3G1-13596

Carb Holder band Clamp - 49-55 mm. range. Fits carb holders for stock Mikuni BS 34 CV carbs as used on North American 1980-84 XS650's

OEM Reference #
• 90460-53106
• 3G1-13586-00-00
• 3G1-13596-00-00

38mm. Carb Holder Set for stock Mikuni BS38CV carburetors. Same as used on 70-77 models. Air barbs are for balancing carbs or operation of original vacuum type petcocks. *** Note - are not good replacement parts if the intent is to use the stock side covers Fits: All 1970-77 650's. OEM reference: 447-13555-01-00 LH, 447-13565-01-00 RH

OEM Reference #
• 447-13555-01-00
• 447-13565-01-00

Dual Carb Sync Gauge Set with built in adjustable
Pulse Dampers mounted on bracket and with hoses.
Precision Diaphragm type gauge set originally designed
for Professional Motorcycle shop use in Japan.

Note: Sync gauges hoses hook up to carb holder vacuum air barbs (not included).
Your bike must have these air barbs in order to use this sync tool.

Gasket (Pk./2.) - Intake Spigot (Carb Holder Rubber) - Fits: 1970-84 650's OEM Ref.# 256-13556-01 j XS1 XS1B XS2 TX650 XS650 Fits: Between XS650 Manifolds (Carb Spacers) and cylinder head and between the XS manifolds and the carb holders for the PWK 32. Fits: Keihin Flatslide PWK 32mm. XS Performance Carb Set for XS650. Note: 2 sets required.

OEM Reference #
• 256-13556-01

Stainless steel socket head screws for carb holders Set of 4 for stock carb holders as used on 1970-84 650's

OEM Reference #
• 91317-06020-00

Blind Plug - Carb Holder Air Barb - OEM Ref.# 1J7-13569-00. Also called carburetor rubber passage plug. Fits: 1978-84 XS650 stock carb holders & blocks off air barbs when vacuum petcocks are replaced with manual type petcocks. Order quantity needed. Also fits: XS1100 80-81 Fits: All Mikes XS Carb Holders and Carb Holders for Keihin Flatslide PWK 32mm XS Performance Carb Set for XS650. Note: Each carb holder requires 1 Blind Plug.

OEM Reference #
• 1J7-13569-00

Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds
to Filter Joints and all purpose uses except carb holders.

Fits: 37-43mm. (1.45"-1.69") Diameters

Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds
to Filter Joints and all purpose uses except carb holders.

Fits: 43-49mm. (1.69"-1.93"") Diameters

Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds
to Filter Joints and all purpose uses except carb holders.

Fits: 49-67mm. (1.93"-2.64") Diameters

Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds
to Filter Joints and all purpose uses except carb holders.

Fits: 67-73mm. (2.64"-2.87")Diameters

Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds
to Filter Joints and all purpose uses except carb holders.

Fits: 73-79mm. (2.87"-3.11") Diameters

Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds
to Filter Joints and all purpose uses except carb holders.

Fits: 79-85mm. (3.11"-3.35") Diameters

Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds
to Filter Joints and all purpose uses except carb holders.

Fits: 85-91mm. (3.35"-3.58") Diameters

Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds
to Filter Joints and all purpose uses except carb holders.

Fits: 91-97mm (3.58"-3.82") Diameters

Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds
to Filter Joints and all purpose uses except carb holders.

Fits: 97-103mm (3.82"-4.00") Diameters

Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds
to Filter Joints and all purpose uses except carb holders.

Fits: 103-109mm (4.00"-4.29") Diameters

Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds
to Filter Joints and all purpose uses except carb holders.

Fits: 109-115mm (4.29"-4.53") Diameters

Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds
to Filter Joints and all purpose uses except carb holders.

Fits: 115-121mm. (4.53"-4.76") Diameters

Band Clamp for Air Filters, Airbox to Carb Joints, Custom Manifolds
to Filter Joints and all purpose uses except carb holders.

Fits: 121-127mm. (4.76"-5.00") Diameters

Rubber Joint - Carb to Air Filter Box - 1Pc. of Air box rubber Joint & 2pc.of Tension Spring - Fits: 1970-79 XS/TX 650's - Carb to air box - right or left side. Each bike requires 2 sets. 54MM

OEM Reference #
• 341-14453-00
• 3G1-14453-00-00

Rubber Joint (between Air filter boxes) and Spring Fits: Stock Air boxes used on 1974-84 650's.

OEM Reference #
• 447-14463-01

Engine Breather Hose & Spring - Black Vent Hose & 10" Spring

OEM Reference #
• 90501-101J3-00

Breather Vent Hose - 1 Meter (approx. 3 feet) bulk length.

OEM Reference #
• 256-11166-00-00

Wire Spring type Hose Clamp. 3/16" (4mm.) inside Diameter size (unexpanded)
in packs of 10pc. Suitable for small carb vent hose.

Wire Spring type Hose Clamp. 1/4" (6mm.) inside Diameter size (unexpanded)
in packs of 10pc. Suitable for matching small fuel or vent hose.

Wire Spring type Hose Clamp. 5/16" (8mm.) inside Diameter size (unexpanded)
in packs of 10pc. Suitable for matching fuel or vent hose.

Wire Spring type Hose Clamp. 0.35" (9mm.) inside Diameter size (unexpanded)
in packs of 10pc. Best Size to fit Standard XS petcocks using 20-4009/10
black rubber fuel line.

Wire Spring type Hose Clamp. 3/8" (10mm.) inside Diameter size (unexpanded)
in packs of 10pc. Suitable for matching fuel or vent hose.

Wire Spring type Hose Clamp. 1/2" (13mm.) inside Diameter size (unexpanded)
in packs of 10pc. Suitable for matching fuel or vent hose.

Black Rubber Fuel or Vent Line - ( original thin wall type ) 3/16" (4.5mm.) ID x
11.5"

Fits: Keihin Flatslide PWK 32mm. XS Performance Carbs for XS650.

Note: Each Carb requires 1 pc. to go to each fuel feed (Petcock).

Black Rubber Fuel Line - (original thin wall type) 1/4" ID (6mm.) - 1pc. x 11.5"

Fuel Line T - Fits: 5/16" ID fuel line (8mm).
Ideal for linking output from two fuel petcocks into one.

Reed type Positive crankcase ventilation Valve.
Valve hooks to engine top breather vent and allows expelled air out but reed
prevents air re-entering quickly so a very small vacuum is created in the
crankcase. A small power increase has been noted during dyno tests (most
notable on pre 77 engines) and the crankcase vacuum helps prevent crankcase
pressure from pushing oil past oil seals and case joints.

Chrome Breather Filter with Die cast Mount Bracket and Filter Cap.

Breather Filter with Chrome Steel Ends.

Breather Filter with rubber end.

Premium quality 54mm. motorcycle Pod Air Filter - Tapered Oval style with Chrome end cap.

Pod is an improved replica (Dyno & flow bench developed) of the most popular
brand on the market. Features molded in internal stack, no step rubber mount
flange and Chrome end cap. Filter is supplied dry but washable filtration
material may be oiled for improved dust filtration.
(2.75") deep x 74 mm. (2.91") wide x 85 mm. (3 3/8") high (at base). The flange does not block the openings in the stock carbs as other standard pod filters do.
Yamaha, Suzuki, Kawasaki, Honda.
Fits: 1980-84 stock Mikuni BS34 CV Carbs + some Mikuni TM aftermarket carbs.
Fits: Flatslide PWK 32mm. XS Performance Carb Set for XS650
Note: Each kit requires 2 filters.
Compatible with XS400Pod fits to velocity stack on Dellorto PHF36 carbs

Air Filter - Fits: XS650G-K - All 1980-84 650's - 2 used per bike. OEM Ref.# 3G1-14451 Made in Japan

OEM Reference #
• 3G1-14451-00

Air Filter Retaining Clip - Fits: XS650 1980-84 with stock 3G1 type air filters. OEM Ref.# 3G1-14468-00

OEM Reference #
• 3G1-14468-00

Air Filter - Fits: XS650 C/D/E/SE/F/SF/2F 1976-79 - 2 used per bike. OEM Ref.# 533 -14451-00 Made in Japan

OEM Reference #
• 533-14451-00

Air Filter Element Retainer Clip. Fits: XS650 C/D/E/F/2F/SE/SF (1976-79) OEM Ref. # 533-14468-02-00

OEM Reference #
• 533-14468-02-00

Air Filter - Fits: TX650A 1974, XS650B 1975 - 2 used per bike OEM Ref.# 447-14451-01 Made in Japan

OEM Reference #
• 447-14451-01-00

Air Filter - Fits: XS2/TX650 1972-73 - 2 used per bike OEM Ref.# 306-14451 Made in Japan

OEM Reference #
• 306-14451-00
• 256-14451-00-00

Air Filter - Fits: XS1/XS1b 1970-71 - 2 used per bike OEM Ref.# 256-14451 Made in Japan

OEM Reference #
• 256-14451-00
• 256-13441-00

Band Clamp - 39-43mm. range. Can be used for Carb Holders,
Air Boxes, Fork Gaitors, Filters etc... requiring this size.

Note: See top of this sections for other sizes and clamps
specific to stock carb holders.

Band Clamp - 45-49mm. range. Can be used for Carb Holders,
Air Boxes, Fork Gaitors, Filters etc... requiring this size.

Note: See top of this section for other sizes and clamps
specific to stock carb holders.

Band clamp - 63-67 mm. range. Can be used for Carb Holders,
Air Boxes, Fork Gaitors, Filters etc... requiring this size.

Note: See top of this section for other sizes and clamps
specific to stock carb holders.

Band Clamp - 68-73mm. range. Can be used for Carb Holders,
Air Boxes, Fork Gaitors, Filters etc... requiring this size.

Note: See top of this section for other sizes and clamps
specific to stock carb holders.

Clear square inline Fuel Filter.