- New Items
- Sale Items
- Fuel System
- Tools & Manuals
- Cafe, Chopper, Bobber Parts
- XS360 XS400 Parts
- SR500 Parts
- XS750 XS850 XS1100
- R5 RD250 RD350 RD400
- Product Search
Large size - 6 1/4" at top, 6" deep funnel, 13 1/2" drain tube. Funnel has convenient handle.
Drain tube is flexible for easy of use. Removable washable metal screen in bottom of funnel to remove impurities from fluid.
A handy tool to have.
Quick, easy measurements and easy to read display. Metric and standard. 150mm, 6" scale, includes storage case.
Set contains 3 wrenches (8mm, 9mm, 10mm) and three adjusters (screw type and 3 and 4mm square type). Interchange adjusters and wrenches provide 9 combinations. Ideal for most makes and models.
Essential tool for transmission rebuilds, also used for wheel bearing removal.
Piston Ring Tool set for motorcycles. Designed to prevent ring damage during cylinder installation. Easily removed after cylinder is in position. Supplied with 4 rings to accept most engine sizes, fit 40-85mm. Come with case.
Also fits preload adjuster on some stock Yamaha Shocks
Cleans, polishes, protects and removes corrosion.
For all metal parts-chrome, brass, copper, nickel,
stainless steel & aluminum.
Made in Germany since 1929.
"A product that is superior to anything else available"
eliminating the need for deep sockets. Reaches in Deep.
Set includes Thin Go Thru Ratchet and Extension + 6 pint Go thru Sockets - 19mm.,
17mm.,16mm., 15mm., 14mm., 13mm., 12mm., 11mm., 10mm.,+
1/4" Drive adaptor with matching Sockets in Sizes - 14mm., 13mm.,12mm., 11mm.,
10mm., 9mm., 8mm., 7mm., 6mm., 5.5mm., 5mm., 4.5mm., & 4mm.
In plastic latched case.
Ratchet with quick release. Set includes 3/8 drive ratchet handle and 11 1/2"
inch long drivers in Deep mm sizes - 8,9,10,11,12,13,14,17 & 19mm. Includes
1 US Quart = 946cc (946ml.)
and other fluids.
and other fluids.
Easily removes XS650 Piston Pins (20 & 22mm. OD) without damage.
Adjustable ring measures oil levels from 0-300mm. in 50mm. increments.
60ml. capacity syringe adjusts fluid levels.
loosen those tight oil plugs.
Fits: TX650 (1973), XS650 (1978-84).
VRLA, Gel and conventional flooded lead acid batteries. UL & CSA Approved.
Output is 1.25 Amps, 12 volt DC (maximum 14.5 Volts). 4 Stage Microprocessor
controlled charging with automatic shutoff at full charge. 120v AC Input.
1. Qualification - Ensures battery is safe to charge, and has minimum 3 Volts.
2. Bulk Charge - Raises battery to 80 percent of full voltage.
3. Absorption - Holds battery voltage at 80 percent and forces current to top battery
4. Float Mode - Maintains the fully charged battery at a proper working voltage.
Charger Features - 6 LED indicators to show charging status, reverse polarity
protection, overheat protection, overcharge protection and spark proofing.
Full instructions, quick disconnect alligator clip leads and fused eye terminal
leads included. (Not for outdoor use).
diodes, switches, sockets and wires (requires one AA battery - Not included).
Long 48" leads.
circuits for power. Plastic handle lights up if circuit is good. Icepick type
probe and 48" cable with insulated alligator clips.
Water & dirt are blown down cable by lubricant when pressure spray can nozzle
is applied. Spray lube sold by most bike shops.
Cable lubrication tool.
Pulse Dampers mounted on bracket and with hoses.
Precision Diaphragm type gauge set originally designed
for Professional Motorcycle shop use in Japan.
Note: Sync gauges hoses hook up to carb holder vacuum air barbs (not included).
Your bike must have these air barbs in order to use this sync tool.
Inductive Xenon Timing Light. Operates from 12 Volt Battery Power. The only accurate way to set your 650's Timing and check advance.
- Neon double check indicator insures proper hookup or detects faulty flash tube.
- Specific feature or reverse polarity protection.
- Heavy duty inductive pick-up clamps and leads for easy and safe operation.
- Bright xenon flash tube provides concentrated light for easy visibility of timing mark.
Includes Sizes - .008", .010", .012", .013", .014", .015", .016",
018", .019", .020", .025", .026"
Marked in Metric and Inch sizes.
9pc. Set (marked in metric sizes only).
0.04mm. - (.0015")
0.05mm. - (.002")
0.06mm. - (.0025")
0.07mm. - (.0028")
0.08mm. - (.003")
0.10mm. - (.004")
0.15mm. - (.006")
0.20mm. - (.008")
0.30mm. - (.012")
point clearances. 20pc. Set (marked in metric sizes only).
0.05mm. - (.002") 0.55mm. - (0.22")
0.10mm. - (.004") 0.60mm. - (0.24")
0.15mm. - (.006") 0.65mm. - (0.26")
0.20mm. - (.008") 0.70mm. - (0.28")
0.25mm. - (.010") 0.75mm. - (0.30")
0.30mm. - (.012") 0.80mm. - (0.32")
0.35mm. - (.014") 0.85mm. - (0.34")
0.40mm. - (.016") 0.90mm. - (0.36")
0.45mm. - (.018") 0.95mm. - (0.38")
0.50mm. - (0.20") 1.00mm. - (0.40")
Includes adapters to fit 10, 12, 14, & 18mm. Spark plug holes.
flex hose with 14mm. threaded end.
bikes tool kit as a map light or for emergency roadside repair. Low power draw
LED bulb provides a bright beam and long battery life from one AAA battery (Not
engine internal parts.18" long wand with a 6mm.(1/4") OD tip.
Image resolution is 7,400 pixels. Packed in a blow mold case
with handle jacket and extra Xenon Bulbs and 2 AA batteries.
Also see 35-9098 for 45 degree adapter.
23" Long, picks up to 3.5 Lbs.
A very useful tool to identify the many various fastener threads used on
Japanese bikes. Gauge has the following sizes - 0.5, 0.6, 0.7, 0.8, 0.9, 1.0,
1.25, 1.75, 2.7, 2.8.
Set includes Pitch Gauge, Die Holder, 2 Tap Wrenches & screw driver +
Metric Taps - M3 x 0.5, M3 x 0.6, M4 x 0.75, M4 x 0.7, M5 x 0.8, M5 x 0.9,
M6 x 1.0, M6 x 0.75, M7 x 0.75, M7 x 1.0, M8 x 1.0, M8x 1.25, M10 x 1.25,
M10 x1.5, M12x 1.25, M12 x 1.5, 1/8NPT x 27
Metric Dies - 17 Dies to match taps listed above.
Note: Do Not use for rear drive chains.
Engine Rocker Arm Shafts from head cove. Works
on All 1970-84 650's. Easy to use.
This style valve spring Compressor works best on the XS650.
High quality professional tool to remove valve springs.
Now with 5 Tips! - 16, 19, 23, 25 & 30mm. Dia.
Kit was created by Mikes XS specifically for overhauling the XS650 cylinder head.
Works on All 1970-84 650 engines.
1 - Precision ground T-Handle Valve guide Pilot
1- 36 x 45 degree Carbide Cutter
1- 43 x 30 degree Carbide Cutter
1- 43 x 45 degree Carbide Cutter
1- 43 x 60 degree Carbide Cutter
1- 36 x 45 degree Finishing Stone, 1- 42 x 45 degree Finishing Stone
1 Set/2 Valve Lapping Sticks, 1 Tube Valve Lapping Paste,
screws. Set includes sizes - 1/8", 3/16", 15/64", 5/16", & 3/8"
Set includes small sizes usually not available:
1.6mm, 2.3mm, 3.2mm, 4.0 mm, 4.8mm, 5.5 mm,
6.4mm, & 8.0 mm in storage case
This product is temporarily out of stock.8 pc. Driver Set for Allen Socket Screw
Hard to find deep 140mm. Long bits ideal for reaching up
inside lower for legs and other recessed spots. Kit includes
1/2"" drive socket sizes • 5, 6, 7, 8, 10, 12, 14 & 17mm.
Fits: Clutch Hub Nut on All 650's 1970-84
may be removed without damaging hubs.
Fits: All 650 clutches (1970-84).
Fits: Front Sprocket on all 650's 1970-84.
engine screws with slot or phillips heads. This is a nice kit, there are cheap ones out there but you get what you pay for.
impact driver Bits.
impact driver Bits.
hollow pin ends as on our IZUMI 530HT Chain ( Rivet link #56-0235 ) and many
DID brand chains.
the joiner link can be slipped in place. Ideal for new chains that
are difficult to get together for the first time.
Used to press on sideplates (rivet or clip type) onto rear drive chains.
Most late type High strength drive chains now use a press on sideplate
on the connecting link ( including IZUMI 530 HT ).
77-84 brake calipers.
Grabs Brake Caliper Pistons internally so seized pistons
can be worked loose from the caliper.
All metal construction. This is the best way to get the job done quickly.
Note: Do not use this tool with Speed bleeders.
rebuilding master cylinders.
2 Pc. Set - Fits: #8,9,10 & 11 nipple sizes.
LCD Display. 1-100 PSI
to remove. You need 2-3 of these to do the job!
Designed to protect rims from damage caused by tire
Irons when installing tires on rims.
impact recessed damper bolts from lower fork legs.
Fits: 29-160mm. (1 1/8" - 6 1/4" diameters)
Ideal for holding fork tubes and other round smooth shapes.
Fits: Our 06-3601/07/08/21/27/41 & 47 shock sets and many
other aftermarket shocks.
straight and 2 angled tips.
Quick Release. - Set of 2 (Black Color)
4000 Lb. Strength with Quick Release. - Set of 2 (Black Color)