Scroll down to see the products
- Drive Chain
- Sprockets
- Discs 77-84
- Gear Levers, Kickstarters, Passenger Pegs, Footrests
- Parts - Brake Calipers 72-76
- OEM Type Rear Brake Parts - (70-84) Models
- Brake Calipers 77-84
- Brake Switches
- OEM Type Brake Hoses, Front Brake Parts for Early (72-76) Models
- Hoses (77-84) Models - Rubber, Stainless
- Front Master Cylinders & Parts
- Custom Rear Master Cylinders
- Handlebars
- Handlebar Grips
- Handlebar Switches
- Cables - Throttle
- Cables - Clutch, Brake, Decompressor, Clutch Brackets
- Cables - Speedometer, Tachometer
- Bar Lever Brackets, Bar Levers
- Wheel Bearings, Wheel Seals, Axels
- Wheel Rims/ Spokes
- Wheel Weights, Tools, Tubes, Rim Strips
- Body Parts - Fenders, Emblems, Side Covers, Gas Tanks, Chain Guards, Rubber mounts
- Rubber Mounts, Rubber Dampers, Rubber Parts, Sidecovers & Sidecover Emblems
- Sidestand / Centerstand Parts
- Seats & Seat Accessories
Handlebar
Clubman/Cafe Bar - Chrome
Width - 27 3/4" - Rise - 4" - Pullback - 1 1/2" x 7/8"Dia.
Width - 27 3/4" - Rise - 4" - Pullback - 1 1/2" x 7/8"Dia.
Handlebar
Drag Bar - Chrome
Width 27.5" - Rise 0" - Pullback 3 3/4" x 7/8"Dia.
Width 27.5" - Rise 0" - Pullback 3 3/4" x 7/8"Dia.
Handlebar
Daytona Tour Type Bar - Chrome.
Width 29 1/4" - Rise 2 7/8" - Pullback 7 1/4" x 7/8"Dia.
Width 29 1/4" - Rise 2 7/8" - Pullback 7 1/4" x 7/8"Dia.
Handlebar
European Type Bar - Chrome.
Width 30" - Rise 2 1/2" - Pullback 5 1/2" x 7/8"Dia
Width 30" - Rise 2 1/2" - Pullback 5 1/2" x 7/8"Dia
Handlebar
Superbike Type Bar - Chrome.
Width - 30 1/2", Rise - 2 1/2", Pullback - 5 5/8" x 7/8"Dia.
Width - 30 1/2", Rise - 2 1/2", Pullback - 5 5/8" x 7/8"Dia.
Handlebar
Dirt track/Street track Bar - Bright Chrome.
Width - 34 1/2", Rise - 3 3/8", Pullback - 8 1/4" x 7/8"Dia.
Width - 34 1/2", Rise - 3 3/8", Pullback - 8 1/4" x 7/8"Dia.
Handlebar
Dirt track/Street track Bar - Black Chrome look.
Width - 34 1/2", Rise - 3 3/8", Pullpack 8 1/4" x 7/8"Dia.
Width - 34 1/2", Rise - 3 3/8", Pullpack 8 1/4" x 7/8"Dia.
Handlebar
XS650 "Special" Stock Pullback Type Bar - Chrome.
Width - 29", Rise - 7 3/8", Pullback - 13" x 7/8"Dia.
Width - 29", Rise - 7 3/8", Pullback - 13" x 7/8"Dia.
Handlebar
Early Virago Type Bar - Chrome.
Width - 28", Rise - 5 3/8", Pullback - 10 1/4" x 7/8"Dia.
Width - 28", Rise - 5 3/8", Pullback - 10 1/4" x 7/8"Dia.
Handlebar
CB750 special Type Bar - Chrome.
Width - 31", Rise - 5 3/4", Pullback - 7 3/4" x 7/8"
Width - 31", Rise - 5 3/4", Pullback - 7 3/4" x 7/8"
Handlebar
GS-E Type Bar - Chrome (use for XS Standard).
Width - 30", Rise - 4 1/8", Pullback - 10 1/2" x 7/8"Dia.
Width - 30", Rise - 4 1/8", Pullback - 10 1/2" x 7/8"Dia.
Handlebar
XS650B/C Replica bar - chrome bar with original type welded in bar weights.
Width - 27 3/4", Rise - 5 1/2", Pullback - 10 1/2".
Note: Bar has holes drilled for switch wires (wires pass thru bars) as on
original XS650B/C (1975-76) models. If holes are not required see #25-0655 below.
Width - 27 3/4", Rise - 5 1/2", Pullback - 10 1/2".
Note: Bar has holes drilled for switch wires (wires pass thru bars) as on
original XS650B/C (1975-76) models. If holes are not required see #25-0655 below.
Handlebar
XS650B/C Replica bar - chrome bar with original type welded in bar weights.
Width - 27 3/4", Rise - 5 1/2", Pullback - 10 1/2".
Note: Bar does Not have holes drilled for switch wires (wires pass thru bars)
as on original XS650B/C (1975-76) models. If holes are not required see #25-0654
above.
Width - 27 3/4", Rise - 5 1/2", Pullback - 10 1/2".
Note: Bar does Not have holes drilled for switch wires (wires pass thru bars)
as on original XS650B/C (1975-76) models. If holes are not required see #25-0654
above.
Handlebar
XS1/XS2 Replica Bar - Chrome Bar with original type welded in bar weights.
Width - 30 1/2", Rise 4 3/4", Pullback - 10" x 7/8"Dia.
Width - 30 1/2", Rise 4 3/4", Pullback - 10" x 7/8"Dia.
Riser Type Custom Bars
7/8" Diameter Riser Type Chrome Custom Bars for all XS650's
Bars fit directly to the top of the triple tree where stock bar clamps mount
(the stock rubber damping system is retained). Mounting bolts included.
Overall Rise - 4.5"
Width - 31"
Pullback 10"
Bars fit directly to the top of the triple tree where stock bar clamps mount
(the stock rubber damping system is retained). Mounting bolts included.
Overall Rise - 4.5"
Width - 31"
Pullback 10"
Clip-on handlebar Set
Clip-on handlebar Set - Chromed Steel - Fits: 34mm. forks on 1971-76 650's
Note: Clip-Ons are Race parts and may Not work with the stock
controls/switches on All models/years. Bar length is 8.0"
Note: Clip-Ons are Race parts and may Not work with the stock
controls/switches on All models/years. Bar length is 8.0"
Clip-on handlebar Set
Clip-on handlebar Set - Chromed Steel - Fits: 35mm. forks on 1977-84 650's
Note: Clip-Ons are Race parts and may Not work with the stock
controls/switches on All models/years. Bar length is 8.0"
Note: Clip-Ons are Race parts and may Not work with the stock
controls/switches on All models/years. Bar length is 8.0"
Handlebar bar top Clamp
Chrome Custom handlebar bar top Clamp - with plated allen socket bolts.
Fits: All 650's 1970-84
Fits: All 650's 1970-84
Handlebar damper rubbers-(Set/4)
Handlebar damper rubbers (Set of 4) - Fits into Top crown & dampens vibration.