Scroll down to see the products
- Drive Chain
- Sprockets
- Discs 77-84
- Gear Levers, Kickstarters, Passenger Pegs, Footrests
- Parts - Brake Calipers 72-76
- OEM Type Rear Brake Parts - (70-84) Models
- Brake Calipers 77-84
- Brake Switches
- OEM Type Brake Hoses, Front Brake Parts for Early (72-76) Models
- Hoses (77-84) Models - Rubber, Stainless
- Front Master Cylinders & Parts
- Custom Rear Master Cylinders
- Handlebars
- Handlebar Grips
- Handlebar Switches
- Cables - Throttle
- Cables - Clutch, Brake, Decompressor, Clutch Brackets
- Cables - Speedometer, Tachometer
- Bar Lever Brackets, Bar Levers
- Wheel Bearings, Wheel Seals, Axels
- Wheel Rims/ Spokes
- Wheel Weights, Tools, Tubes, Rim Strips
- Body Parts - Fenders, Emblems, Side Covers, Gas Tanks, Chain Guards, Rubber mounts
- Rubber Mounts, Rubber Dampers, Rubber Parts, Sidecovers & Sidecover Emblems
- Sidestand / Centerstand Parts
- Seats & Seat Accessories
Brake Shoe Set
Brake Shoes Rear ( 2pc.set ) Fits: Rear wheel drum brake's on all 1970-84 XS/TX 650's
Note: Front shoes for XS1/XS1b 1970-71 models are Not available.
Note: Front shoes for XS1/XS1b 1970-71 models are Not available.
Brake Shoe Springs
Brake Shoe Tension Springs (Set/2).
Fits All Rear Drum Brakes on 1970-84 650's
Plated Finish
Fits All Rear Drum Brakes on 1970-84 650's
Plated Finish
Bolt - Brake Backing plate to Brake Stay
Bolt assembly (Special type) - Fits: Brake Shoe Backing
plate to Brake stay.
Fits: All 1974-84 XS/TX650's.
plate to Brake stay.
Fits: All 1974-84 XS/TX650's.
Rear Drum Brake Actuating Lever
Rear Brake actuating lever with Bolt - Chrome Plated
Fits: 1974-84 650's with Rear Drum Brake.
Replaces OEM # 341-25355-00
Fits: 1974-84 650's with Rear Drum Brake.
Replaces OEM # 341-25355-00
Rear Brake Rod
Rear Brake Rod with end spring, adjuster Nut and lever Pin
Fits: All Rear wheel drum brakes on 1970-84 XS/TX 650's
Fits: All Rear wheel drum brakes on 1970-84 XS/TX 650's
Brake Rod Spring
Brake Rod Spring - Fits: 1974-84 650's
Replaces OEM # 90501-10245/180-27236
Replaces OEM # 90501-10245/180-27236
Brake Rod Adjuster Pin
Brake Rod Adjuster Pin (Pin with Hole)
Fits: 1974-84 650's Replaces OEM # 90249-12008
Fits: 1974-84 650's Replaces OEM # 90249-12008
Brake Rod Adjustment Nut
Brake Rod Adjustment Nut - Fits: 1974-84 650's
Replaces OEM # 90179-06176-00/06227
Replaces OEM # 90179-06176-00/06227
Rear Brake Light Switch
Rear Brake Light Switch - Fits: All 650's 1970-84.
Rear Brake Master Cylinder Rebuild Kit
Rear Brake Master Cylinder Rebuild Kit - OEM# 1J3-W0042-50-, 1J3-20000-50
Fits: XS650SE/SF/SG (78-80) "Specials" with Rear master cylinder assembly.
Fits: XS650SE/SF/SG (78-80) "Specials" with Rear master cylinder assembly.
Brake Caliper Rebuild Kit
Brake Caliper Rebuild Kit - Fits:1977-84 XS650 Front or Rear Calipers.
Contains caliper piston seal, dust boot, spring clip and bleed screw
rubber cap. OEM Ref.# 1J3-W0047, 1J3-20000-20-00
Contains caliper piston seal, dust boot, spring clip and bleed screw
rubber cap. OEM Ref.# 1J3-W0047, 1J3-20000-20-00
Right Angled Snap ring Plier Set
Right Angled Snap ring Plier Set - Reaches in deep to remove clips when
rebuilding master cylinders.
rebuilding master cylinders.
Caliper Piston - Front or Rear 77-84
Brake Caliper Piston - Fits: Front or Rear Caliper on 1977-84 650's.
Replace if pitted or scored or air will seep into the brake system.
Replace if pitted or scored or air will seep into the brake system.
Brake Pad Set
Brake Pad Set ( for 1 caliper ) - Fits: Front - XS650D-K (1977-84) and
Rear - XS650 (1978-84 - Kevlar Carbon compound.
OEM Ref.: 1J3-20000-11/13, 3H5-W0045-00, 2MO-W0046-01
Rear - XS650 (1978-84 - Kevlar Carbon compound.
OEM Ref.: 1J3-20000-11/13, 3H5-W0045-00, 2MO-W0046-01
Caliper Bleed Screw
Caliper Bleed Screw - Standard type - Fits: 77-84 650's Front or Rear.
Caliper Speed Bleed Screw
Caliper Speed Bleed Screw - Built in check valve allows Easier brake bleeding.
Fits: 1977-84 XS650 calipers.
Fits: 1977-84 XS650 calipers.
Banjo Bolt
Banjo Bolt - M10. x 1.25 - Fits: All original XS/TX650 front & rear master cylinders
and most Yamaha brake calipers. - Oem Ref.# 90401-10034
and most Yamaha brake calipers. - Oem Ref.# 90401-10034
Banjo Bolt Washers
Banjo Bolt Washers - 10mm. (Pk./2) Fits: All Brake hoses & Banjo Bolts.
Brake Hose
Brake Hose - Rear. Fits: Rear on XS650SE/SF/SG (1978-80) "Specials"
Original Equipment rubber type - Made in Japan. - D.O.T. Approved
Original Equipment rubber type - Made in Japan. - D.O.T. Approved
Braided Stainless Brake Hose
DOT/TUV approved Stainless Steel Braided Brake Line
Fits: 78-80 XS650 Rear Disc Brake approximately 24.5" Long.
Ends rotate up to 1 full turn.
Fits: 78-80 XS650 Rear Disc Brake approximately 24.5" Long.
Ends rotate up to 1 full turn.