Scroll down to see the products
- Drive Chain
- Sprockets
- Discs 77-84
- Gear Levers, Kickstarters, Passenger Pegs, Footrests
- Parts - Brake Calipers 72-76
- OEM Type Rear Brake Parts - (70-84) Models
- Brake Calipers 77-84
- Brake Switches
- OEM Type Brake Hoses, Front Brake Parts for Early (72-76) Models
- Hoses (77-84) Models - Rubber, Stainless
- Front Master Cylinders & Parts
- Custom Rear Master Cylinders
- Handlebars
- Handlebar Grips
- Handlebar Switches
- Cables - Throttle
- Cables - Clutch, Brake, Decompressor, Clutch Brackets
- Cables - Speedometer, Tachometer
- Bar Lever Brackets, Bar Levers
- Wheel Bearings, Wheel Seals, Axels
- Wheel Rims/ Spokes
- Wheel Weights, Tools, Tubes, Rim Strips
- Body Parts - Fenders, Emblems, Side Covers, Gas Tanks, Chain Guards, Rubber mounts
- Rubber Mounts, Rubber Dampers, Rubber Parts, Sidecovers & Sidecover Emblems
- Sidestand / Centerstand Parts
- Seats & Seat Accessories
Right Angled Snap ring Plier Set
Right Angled Snap ring Plier Set - Reaches in deep to remove clips when
rebuilding master cylinders.
rebuilding master cylinders.
Front Brake Master Cylinder Rebuild Kit
Front Brake Master Cylinder Rebuild Kit - OEM # 535-W0041-60, 535-20000-60
Fits: Front Master Cylinder Assembly on All XS650 Models D-L (1977-84) with
single front disc brake.
Note: This Kit does Not fit earlier 650 models.
Fits: Front Master Cylinder Assembly on All XS650 Models D-L (1977-84) with
single front disc brake.
Note: This Kit does Not fit earlier 650 models.
Front Brake Master Cylinder Rebuild Kit
Front Brake Master Cylinder Rebuild Kit - OEM # 1J3-W0041-20 to fit optional Dua
Disc on 1980 XS650SG - Master Cylinder - OEM# 2G2-25850-01 & 3J6-25850-00
Note: This Master Cylinder is the same as used on 79-81 XS1100 models with
Dual Disc or offered as original on some 1977-84 XS650 models (3J6 master assy.)
Disc on 1980 XS650SG - Master Cylinder - OEM# 2G2-25850-01 & 3J6-25850-00
Note: This Master Cylinder is the same as used on 79-81 XS1100 models with
Dual Disc or offered as original on some 1977-84 XS650 models (3J6 master assy.)
Reservoir Cap & Diaphragm Kit
Master Cylinder Cap and Diaphragm Kit to Repair Original master Cylinders used
on All 1978-84 650's.
Kit Contains: Reservoir Cap - OEM # 1J3-25852-01-00
Diaphragm Bushing - OEM # 1J3-25855-01-00
Diaphragm - OEM # 1J3-25854-01
Cap Srews (4) - OEM # 90151-05008-00
Made in Japan
on All 1978-84 650's.
Kit Contains: Reservoir Cap - OEM # 1J3-25852-01-00
Diaphragm Bushing - OEM # 1J3-25855-01-00
Diaphragm - OEM # 1J3-25854-01
Cap Srews (4) - OEM # 90151-05008-00
Made in Japan
Master Cylinder Assembly
Master Cylinder Assembly - 13mm. bore (for single Front disc brake)
Yamaha OEM type. Complete with brake lever, brake light switch, banjo bolt and
banjo bolt washers (Pr.). Recommended for 1977-84 650's
Yamaha OEM type. Complete with brake lever, brake light switch, banjo bolt and
banjo bolt washers (Pr.). Recommended for 1977-84 650's
Master Cylinder Rebuild Kit
Rebuild Kit for 1MH (XS# 08-0255) Master Cylinder Asssembly- (13mm. bore)
Note: This kit does Not fit any other Master cylinder.
Note: This kit does Not fit any other Master cylinder.
Master Cylinder Assembly Rebuild Kit
Rebuild Kit for 1MH (XS# 08-0265) Universal Master Cylinder (16mm. bore).
Note: This kit does Not fit any other Master cylinder.
Note: This kit does Not fit any other Master cylinder.
Master Cylinder Assembly
Master Cylinder Assembly - 16mm bore. - Recommended for late dual disc Front
brakes on 1977-84 XS650's or single front disc brake (1972-76 650's). Yamaha
OEM type. Complete with brake lever, brake light switch, banjo bolt and washers.
brakes on 1977-84 XS650's or single front disc brake (1972-76 650's). Yamaha
OEM type. Complete with brake lever, brake light switch, banjo bolt and washers.
Front Brake Light Switch
Front Brake Light Switch - Fits:1976-84 XS650's OEM Ref.# 1AO-83980-30
Brake Master Cylinder
Brake Side (RH side) Master Cylinder for use with single
disc brakes as on 77-84 650's. All Alloy Low profile design
Mirror mount has RH threads.
(Note: LH #08-0261 Clutch master listed below matches body style)
12.9mm. Piston Dia., Banjo Bolt and brake switch Included.
disc brakes as on 77-84 650's. All Alloy Low profile design
Mirror mount has RH threads.
(Note: LH #08-0261 Clutch master listed below matches body style)
12.9mm. Piston Dia., Banjo Bolt and brake switch Included.
Master Cylinder Rebuild Kit
Master Cylinder Rebuild kit.
Fits: 13mm. Master Cylinders XS# 08-0261 & 08-0262.
Fits: 13mm. Master Cylinders XS# 08-0261 & 08-0262.
Clutch Side Master Cylinder
Clutch Side (LH side) Master Cylinder for use with custom built
hydraulic clutches. 12.9mm. Piston Dia., Banjo Bolt Included.
All Alloy Low Profile Design
(Note: RH #08-0262 above matches body style)
Mirror mount has RH threads.
hydraulic clutches. 12.9mm. Piston Dia., Banjo Bolt Included.
All Alloy Low Profile Design
(Note: RH #08-0262 above matches body style)
Mirror mount has RH threads.
Replacement Clutch Side Lever
Replacement Lever to fit Clutch Master Cylinder assembly # 08-0261
and 08-0262
and 08-0262
Clutch Side Master Cylinder
Magura Clutch (LH side) Master Cylinder for use with custom built hydraulic
clutches.
Note: Matches Magura RH side brake master cylinder (XS#08-0251) and is
complete with lever and banjo bolt. Master cylinder has a compact
lightweight design (11.7oz.) and has a 13mm. dia. piston. Made in Germany.
clutches.
Note: Matches Magura RH side brake master cylinder (XS#08-0251) and is
complete with lever and banjo bolt. Master cylinder has a compact
lightweight design (11.7oz.) and has a 13mm. dia. piston. Made in Germany.
Magura Brake (RH) Master Cylinder Assy.
Magura Brake (RH) Master Cylinder Assy. Replaces original types on All XS/TX650's
72-84. Compact lightweight design (10.3oz.), complete with brake switch, matching 10
x 1.0 Banjo Bolt and banjo bolt washers (2pc.) Ideal for street tracker use or any
single or dual disc brake 650. Made in Germany
72-84. Compact lightweight design (10.3oz.), complete with brake switch, matching 10
x 1.0 Banjo Bolt and banjo bolt washers (2pc.) Ideal for street tracker use or any
single or dual disc brake 650. Made in Germany
Replacement Brake Light Switch
Replacement Brake Light Switch for Magura master cylinder.
Replacement Alloy Lever
Replacement Alloy Lever for Magura Master Cylinder assembly.
Master Cylinder Rebuild Kit
Rebuild Kit for 16mm. Magura Master Cylinder XS# 08-0251
Banjo Bolt
Banjo Bolt - M10 x 1.0 for use on Magura master cylinder only.
Banjo Bolt
Banjo Bolt - M10. x 1.25 - Fits: All original XS/TX650 front & rear master cylinders
and most Yamaha brake calipers. - Oem Ref.# 90401-10034
and most Yamaha brake calipers. - Oem Ref.# 90401-10034
Banjo Bolt Washers
Banjo Bolt Washers - 10mm. (Pk./2) Fits: All Brake hoses & Banjo Bolts.
Early Dual Disc Master Cylinder
Early type (72-76) Dual Disc Brake Master Cylinder Assembly
as used on European model XS/TX 650's (22mm. Bore).
Made by MikesXS for our European Distributors.
Note: NOT the same unit as the early Single Disc Brake type (16mm.)
as used on European model XS/TX 650's (22mm. Bore).
Made by MikesXS for our European Distributors.
Note: NOT the same unit as the early Single Disc Brake type (16mm.)
Brake Hose Boot
Rubber Boot- Fits: 1972-76 Original Master Cylinders where the brake hose joins
to the master cylinder.
to the master cylinder.
Master Cylinder with Sloped Reservoir
Replacement Front Master Cylinder assembly with sloped reservoir for
bikes with bars that situate the master cylinder on a slope - "Specials".
14.0mm. piston bore. Brake Light Switch and Banjo Bolt included.
NOTE: This unit does NOT have a mirror mount hole.
bikes with bars that situate the master cylinder on a slope - "Specials".
14.0mm. piston bore. Brake Light Switch and Banjo Bolt included.
NOTE: This unit does NOT have a mirror mount hole.
Slimline Lightweight Master Cylinder
Replacement Lightweight (11.1oz.) Front Master Cylinder Assembly Ideal
for 77-84 Street Trackers or stock bikes with Single Disc brake.
11.0mm. piston bore. Brake Light Switch and Banjo Bolt included.
NOTE: This unit does Not have a mirror mount hole.
for 77-84 Street Trackers or stock bikes with Single Disc brake.
11.0mm. piston bore. Brake Light Switch and Banjo Bolt included.
NOTE: This unit does Not have a mirror mount hole.
Master Cylinder Rebuild Kit
Master Cylinder Rebuild Kit for master cylinder XS #08-4003.
Brake Light Switch
Brake Light switch to fit 08-4003/4004 front master Cylinders
Front Master Cylinder
Front Brake (RH side) Master Cylinder
Replacement Lightweight (9.5oz.) Front Master Cylinder Assembly.
Ideal for 77-84 Street Trackers or stock bikes with Single Disc brake.
12.7.0mm. piston bore. Brake Light Switch and Banjo Bolt included.
Reservoir has fluid level sight glass. Compact size.
NOTE: This unit has an 8mm. mirror mount hole and requires adapter set
XS#16-4659 to use a mirror with the more common 10mm. thread.
Replacement Lightweight (9.5oz.) Front Master Cylinder Assembly.
Ideal for 77-84 Street Trackers or stock bikes with Single Disc brake.
12.7.0mm. piston bore. Brake Light Switch and Banjo Bolt included.
Reservoir has fluid level sight glass. Compact size.
NOTE: This unit has an 8mm. mirror mount hole and requires adapter set
XS#16-4659 to use a mirror with the more common 10mm. thread.
Hydraulic Banjo Bolt Brake Switch
Brake Switch - Hydraulic Banjo Bolt Type . 10mm. x M1.25 with 24" Lead.
Fits: All Hydraulic Brake systems on all 72-84 XS650's that use a single hose
type banjo bolt. Brake switch bolt can be fitted anywhere from the master
cylinder to the caliper and is actuated by hydraulic pressure.
Fits: All Hydraulic Brake systems on all 72-84 XS650's that use a single hose
type banjo bolt. Brake switch bolt can be fitted anywhere from the master
cylinder to the caliper and is actuated by hydraulic pressure.
Hydraulic Banjo Bolt Brake Switch
Brake Switch - Hydraulic Banjo Bolt Type . 10mm. x M1.00 with 24" Lead.
Fits: All Magura Master Cylinders, Our # 08-4000 rear master cylinder and many
European and Suzuki brake systems (10mm. X M1.00 thread). Must use a single
hose type banjo bolt. Brake switch bolt can be fitted anywhere from the master
cylinder to the caliper and is actuated by hydraulic pressure.
Fits: All Magura Master Cylinders, Our # 08-4000 rear master cylinder and many
European and Suzuki brake systems (10mm. X M1.00 thread). Must use a single
hose type banjo bolt. Brake switch bolt can be fitted anywhere from the master
cylinder to the caliper and is actuated by hydraulic pressure.