Mikes XS

VM Mikuni slide (Jet) Needle for aftermarket Mikuni VM roundslide carburetors.
This needle is popular for the VM36 and also can be used for the VM34.

Note: Needle should be used with Needle Jet #159P8 (for VM36) or 159P6 or 159P5
which is more suitable for VM34's. The ultimate best combination will depend on
how free the exhaust flows, Air Filters, Carb slide cutaway and other factors
determining final tuning.

Throttle Valve (Carb Slide) for Spigot mount Mikuni VM 36 Carburetors.
Chrome plated Slide has #2.5 Cutaway with a wide type right side
guide pin slot and a left side Idle groove - Ref. #003-126

Genuine Mikuni VM34 right hand carburetor, generic jetting, sold Each. Can easily be converted to left hand. Japanese brand performance carbs. Mikuni round slide carburetors are the most popular high performance carb in the sport of motorcycling. The VM series offers a wide range of tuning components to allow precise fuel mixture metering in any application, at any throttle setting, under any riding condition. Sold pre-jetted.

Main Jet #260, Pilot Jet #35, Needle Jet #159 Q2, Jet Needle #6DH4, Throttle valve cutaway VM32/65 2.5, Air Jet BS30/97 2.0, Needle Valve set VM34/39-3.3, Float height 22-24mm, Mikuni #VM34-275.

As with all carburetors, we recommend an fuel line filter for rust from older gas tanks.

For Genuine K&N filters, also order two 15-0510. For Mikuni pocket tuner, see 48-8106. For Mikuni Tuning manual see 35-0665.

Genuine Mikuni VM34 left hand carburetor, generic jetting, sold Each. Japanese brand performance carbs. Mikuni round slide carburetors are the most popular high performance carb in the sport of motorcycling. The VM series offers a wide range of tuning components to allow precise fuel mixture metering in any application, at any throttle setting, under any riding condition. Sold pre-jetted.

Main Jet #260, Pilot Jet #35, Needle Jet #159 Q2, Jet Needle #6DH4, Throttle valve cutaway VM32/65 2.5, Air Jet BS30/97 2.0, Needle Valve set VM34/39-3.3, Float height 22-24mm, Mikuni #VM34-275.

As with all carburetors, we recommend an fuel line filter for rust from older gas tanks.

For Genuine K&N filters, also order two 15-0510. For Mikuni pocket tuner, see 48-8106. For Mikuni Tuning manual see 35-0665.

Genuine Mikuni VM34 right hand carburetor, XS650 jetting, sold Each. Can easily be converted to left hand. Japanese brand performance carbs. Mikuni round slide carburetors are the most popular high performance carb in the sport of motorcycling. The VM series offers a wide range of tuning components to allow precise fuel mixture metering in any application, at any throttle setting, under any riding condition. Sold pre-jetted.

As with all carburetors, we recommend an fuel line filter for rust from older gas tanks.

For Genuine K&N filters, also order two 15-0510. For Mikuni pocket tuner, see 48-8106. For Mikuni Tuning Manual see 35-0665.

Genuine Mikuni VM34 left hand carburetor, XS650 jetting, sold Each. Japanese brand performance carbs. Mikuni round slide carburetors are the most popular high performance carb in the sport of motorcycling. The VM series offers a wide range of tuning components to allow precise fuel mixture metering in any application, at any throttle setting, under any riding condition. Sold pre-jetted.

As with all carburetors, we recommend an fuel line filter for rust from older gas tanks.

For Genuine K&N filters, also order two 15-0510. For Mikuni pocket tuner, see 48-8106. For Mikuni Tuning Manual see 35-0665.

Float bowl Mikuni VM34 spigot type carburetor

159-P6 Needle Jet for VM-34mm Mikuni after market round slide carburetors. Use with Mikuni Jet needle part # 48-0010 (#6DP1). The P6 Jet is at about the mid-point between lean and rich. The 159 series jets fit VM30-VM36 spigot type carbs.

Genuine K&N universal clamp on air filter for Mikuni and Keihin motorcycle carburetors.
Mounting flange inside dimension 2 1/4", filter outside diameter 3.5", 5" long, flange length 5/8", 5 degree angled flange.

Works with Mikuni and Keihin carbs sold on Mikes XS.
Does not work with the XS Performance carb kit 48-9010.
Works with 48-8100.

Main Jet #180 Mikuni VM34 carburetor with 159 series Needle Jets. Mikuni 4/042.

Carb Pilot Jet #25 Mikuni for VM34 (fits VM24-VM44 spigot type). Mikuni #VM22/210-25.

6F9 Jet Needle for Mikuni VM34 Carburetors. Works with all VM30-38 spigot type.

Mikuni VM34 Needle clips. Works with Mikuni VM26 through VM38 spigot type.

2.5 carb slide Mikuni VM30, VM32, VM34 Spigot type, and VM32 and VM34 Flange type. Mikuni #VM34/110.

This product is temporarily out of stock.

Cable Adjuster - all Mikuni VM series carburetors - 45 degree angle. Adjuster, locknut and rubber cap sold separately.

48-8028 rubber cap
48-8029 Locknut

Mikuni # I-M22-10-3

Lever type starter system set - Mikuni VM30, VM32, VM34 carburetors. #002.350B.

Rubber cap for Mikuni cable adjuster. For cable adjuster on Mikuni VM carburetor series. Cable adjuster part #48-8027.

Locknut for Mikuni cable adjuster part #48-8027.

Mixing Chamber Top Mikuni VM30, VM32, VM34, spigot type.

Carburetor float for Mikuni VM series VM30-VM34 spigot type (we sell VM34). Independent type, non-corrosive plastic compound. Mikuni # VM34/36.

Carburetor float arm for Mikuni VM series VM 30-VM34 spigot type (we sell VM34 carb). Mikuni # VM34/73.

Carburetor float arm hinge pin for Mikuni VM series VM 30-VM44 spigot type (we sell VM34 carb). Mikuni # VM30/160.

Pull type starter for Mikuni VM series carburetors VM30-VM44 spigot type (our VM34). Includes starter plunger, starter plunger spring, starter plunger fitting, clip and rubber cap.

Needle valve washer for Mikuni VM series carburetors VM30-VM44 spigot type (we sell VM34 carbs). Mikuni # BS34/52-0.5.

Carb Pilot jet 15 for Mikuni VM34 (fits VM24-VM44 spigot type). Mikuni # VM22/210-15. SOLD EACH

Carb Pilot Jet 20 for Mikuni VM34 (fits VM24-VM44 spigot type). Mikuni # VM22/210-20. SOLD EACH

159 R-0 Needle Jet Mikuni VM series carburetors (VM34). The R-0 jet is a richer running jet. On the Mikuni lean to rich chart there are 26 Needle Jets in the 159 series, R-0 is the sixth jet from the richest. The 159 series jets fit VM30-VM36 spigot type carbs.

159 O-4 Needle Jet Mikuni VM series carburetors (VM34). The O-4 Jet is towards the leaner end of the scale. Between lean and rich it is about 1/3 of the way down from the leanest. The 159 series jets fit VM30-VM36 spigot type carbs. Sold each.

Main Jet 170 for Mikuni VM series carburetors (VM34) with 159 series needle jets. Mikuni 4/042.

Main Jet 190 for Mikuni VM carburetors (VM34) with 159 series needle jets. Mikuni 4/042.

Main Jet Plug for Mikuni VM series carburetors VM30-VM34 spigot (we sell VM34 carbs). Mikuni # VM34/42.

Air adjusting screw for Mikuni VM series carburetors VM26-VM44 spigot (we sell VM34). Mikuni # VM20/214.

Idle adjusting screw for Mikuni VM series carburetors VM32-VM34 spigot (we sell VM34 carbs). Mikuni # VM24/224.

Idle screw spring for Mikuni VM series carburetors VM26-VM44 spigot (we sell VM34 carbs). Mikuni # M20/221.

Main jet ring for Mikuni VM series carburetors (VM34). Picture shows the top and bottom view of one. Sold each.

UPP Intake manifold. Carb holder for 34mm carburetor. 70mm bolt hole center. No vaccuum barb.

"Geoff's Special" Mikuni carburetor jet kit for Australia. Sold as set of two of each jet.

Consists of 2 each of: 6F9 Jet Needle (48-8011), Needle Jet O4 (48-8003), Pilot Jet 180 (48-8005), and Main Jet 30 (48-8046).

This set is based on the recommendations of a guy who knows, but we cannot make any guarantees for your bike and your location.

Main Jet 175 for Mikuni VM carburetors (VM34) with 159 series needle jets.

Mikuni carburetor Tuning Manual from Sudco. 92 page manual includes exploded parts views, parts listings and optional parts. Guides you through tuning and trouble shooting for the popular lines of Mikuni carburetors. The definite reference for Mikuni carburetors and a must for the do-it-yourselfer.

For Mikuni Pocket Tuner, see 48-8106.

Mikuni Pocket Tuner. A handy pocket-size calculator which can be used to determine required jetting changes in Mikuni carburetors due to climate and temperature changes. The Pocket Tuner is applicable to both single and multi-carb applications on two-stroke and four-stroke engines. It also has a guide for determining rich or lean carburetor conditions.

For Mikuni Tuning Manual see 35-0665.

Slide Spring - Ref.#002-073 - Lightest spring available for the Mikuni VM30-36
roundslide aftermarket carburetors. Easier pull and less strain on your throttle
hand.

Float Valve Assembly (Needle & Seat) for Mikuni VM30-44mm Spigot mount carburetors.
Mikuni # 002-200 VM38/11 #3.5
Recommended Size for Mikuni VM36 round slide aftermarket carbs.

Float Valve Assembly (Needle & Seat) for Mikuni VM30-44mm Spigot mount carburetors.
Mikuni # 002-199 VM28/163 #2.5
Recommended Size for Mikuni VM34 round slide aftermarket carbs.

Float Bowl Gasket for spigot mount Mikuni VM roundslide aftermarket type carburetors.
Mikuni # 002-102 VM36/20 Fits: VM 36-44mm. spigot mount carbs.

Float Bowl Gasket for spigot mount Mikuni VM roundslide aftermarket type carburetors.
Mikuni # 002-100 VM34/30 Fits: VM 30-34mm. spigot mount carbs (without bowl
baffle plate).

Carburetor Choke Plunger - Mikuni VM18/144 type - Fits: Aftermarket Mikuni Round
slide VM 30- 44mm. carburetors with lever type (vertical pull) choke plunger.