- New Items
- Sale Items
- Chassis
- Brakes
- Wheels
- Suspension
- Engine
- Electrical
- Fuel System
- Exhaust
- Accessories
- Tools
- Hardware
- XS400 Parts
- Product Search
BS34/38 CV Mikuni Carb Slides, Carb Top Parts, Throttle Butterfly Parts
- Gas Tanks, Gas Caps, Petcocks, Parts
- Keihin carburetors
- BS34/38 CV Mikuni Carb Floats, Float Valves, Choke Parts
- Mikuni AfterMarket VM Roundslide Carbs and Parts
- BS34/38 CV Mikuni Carb Slides, Carb Top Parts, Throttle Butterfly Parts
- Carb Rebuild Kits, Gaskets
- Mikuni BS34/38 CV Carb Slide Needles, Needle Jets, Mixture Screws
- Carb Main Jets
- Carb Pilot Jets
- Carb Holders, Air Filters, Fuel Filters, Breather Vent Parts
- Throttle Cables, Throttle Sleeve
- XS PWK Performance Carbs and Parts
- Dellorto Performance Carbs & Parts
Carb Slides should be replaced if the the diaphragms are torn or if the
slide body rotates from the diaphragm (is loosened).
Note: Carb slides for 1978-79 XS650s are not interchangeable with
other slides as the needle retainer differs. 1978-79 slides are
currently no longer available.
slide body rotates from the diaphragm (is loosened).
Note: Carb slides for 1978-79 XS650s are not interchangeable with
other slides as the needle retainer differs. 1978-79 slides are
currently no longer available.
Carb Slide & Diaphragm Assembly
Carb Slide & Diaphragm Assembly. - Fits: Mikuni BS38 CV Carbs as used on
1970-77 XS/TX 650's OEM Ref.# 256-14940-00 - Mikuni Genuine
Also fits: XS500 C/D 76-77, TX650 73-74
OEM Reference #
• 256-14940-00
Carb Slide & Diaphragm Assembly
Carb Slide & Diaphragm Assembly. - Fits: Mikuni BS34 CV Carbs as used
on 1980-84 XS650's OEM Ref.# 3F7/3H5-14940 - Mikuni Genuine
Also fits: SR250 Exciter 80-82, XJ900 RK Seca 83, XJ1100 Maxim 82, XS1100 G/H/LG/LG/SG/SH 80-81
OEM Reference #
• 3f7-14940
• 3H5-14940
Slide Needle Preload Spring
Spring - Slide needle preload spring for stock BS34 CV Mikuni carbs as used
on 1980-84 North American model XS650's. OEM Ref.# 3F7-14589-00-00
This spring holds the slide needle down in place in the carb slide.
on 1980-84 North American model XS650's. OEM Ref.# 3F7-14589-00-00
This spring holds the slide needle down in place in the carb slide.
Jet Needle Washer
Slide Needle Washer
Washer - Fits under slide needle preload spring and on top of needle & clip on
stock BS34 CV Mikuni carbs as used on 1980-84 North American model XS650's.
Washer - Fits under slide needle preload spring and on top of needle & clip on
stock BS34 CV Mikuni carbs as used on 1980-84 North American model XS650's.
Slide Needle Clip
Carb Slide Needle Clip (pk./2) - Fits: Slide Needles on 1974-84 650's
with stock Mikuni BS34/38 CV Carbs.
OEM Reference #
• 256-14919-00
Screws - 5mm.
Screws - 5mm.(no lock washers) Late Mikuni CV carb Lid Screw - Pk./4
OEM Reference #
• 98580-05012-00
Screws - 5mm.
Screws - 5mm.- Early Mikuni BS38 CV carb Lid Screws with lockwashers
and Late 34mm CV Bowl Screw Pk./4
OEM Reference #
• 98507-05014-00
Throttle Butterfly Shaft Seal
Throttle Butterfly Shaft Seal - Fits: Stock Mikuni BS34/BS38 CV Carburetors on all 1970-84 650's. Two per pack.
OEM Reference #
• 25-14997-00-00
Throttle Shaft Screws
Throttle Butterfly Shaft Screws (Pk./4)
Fits: Stock Mikuni BS34/BS38 CV Carbs. XS400
OEM Reference #
• 256-14922-01-00