Mikes XS

XS Performance Carburetor Kit for XS650.
32mm Flatslide Carb Set - Includes: Carbs,
Carb Holder Sets, Gaskets, extra Jets, 2 into 1 Cable,
XS Performance Intake Manifolds and Pod Filters.

These carbs will make your XS start, idle, accelerate
and perform better than any other Japanese carbs.
Our Carbs were Dyno developed by Heiden Tuning and specially
built by for Mikes XS for use on four strokes.
A superior replacement for the 1980 to 84 stock Mikuni
BS34 Carbs or your worn out BS38's.
(Note: stock air filter box must be removed).
Additional + & - size jets are included with the kit but
probably will not be needed. Cable fits to 1976-84 throttle.

Separate manifolds will need to be ordered for D-Models.


Made in Taiwan

XS Performance PWK Kit Dyno Chart

Choke-Replacement part for PWK Carburetor 48-9010

#115 Hex type Main Jet (Pair) for Keihin XS 32mm. PWK Performance Carburetors.

Fits: Flatslide PWK XS Carb Set 48-9010

#120 Hex type Main Jet (Pair) for Keihin XS 32mm. PWK Performance Carburetors.

Fits: Flatslide PWK XS Carb Set 48-9010

#125 Hex type Main Jet (Pair) for Keihin XS 32mm PWK Performance Carburetors.

Fits: Flatslide PWK XS Carb Set 48-9010

Note: #125 is the "Standard size" Main Jet included with the PWK32 XS
Carb Set and is in most cases the required main Jet for the XS650.

#130 Hex type Main Jet (Pair) for Keihin XS 32mm. PWK Performance Carburetors.

Fits: Flatslide PWK XS Carb Set 48-9010

#135 Hex type Main Jet (Pair) for Keihin XS 32mm PWK Performance Carburetors.

Fits: Flatslide PWK XS Carb Set 48-9010

#25 Slow (Pilot) Jet (Pair) for Keihin XS 32mm. PWK Performance Carburetors.

Fits: Flatslide PWK XS Carb Set 48-9010

#35 Slow (Pilot) Jet (Pair) for Keihin XS 32mm. PWK Performance Carburetors.

Fits: Flatslide PWK XS Carb Set 48-9010

Note: #35 is the "Standard size" Slow (Pilot) Jet included with the
PWK32 XS Carb Set and is in most cases the required slow jet for the
XS650.

#40 Slow (Pilot) Jet (Pair) for Keihin XS 32mm. PWK Performance Carburetors.

Fits: Flatslide PWK 32mm. XS Carb Set 48-9010

#45 Slow (Pilot) Jet (Pair) for Keihin XS 32mm. PWK Performance Carburetors.

Fits: Flatslide PWK 32mm XS Carb Set 48-9010

Chrome #3.5 Throttle Valve (Slide) for Keihin XS 32mm. PWK Performance Carburetor.

Fits: Flatslide PWK 32mm. XS Carb Set 48-9010

Throttle Valve (Slide) Needle N427-46 for Keihin 32mm XS Performance Carburetor.

Fits: Flatslide PWK 32mm. XS Carb Set 48-9010

Clip for Jet Needle (Pair)

Fits: Throttle Valve (Slide) Needle N427-46 for 32mm.
XS Performance Carburetor 48-9010

Float Needle with Clip.

Fits: Flatslide PWK 32mm. XS Performance Carburetor 48-9010

O-Ring for Float Bowl

Fits: Flatslide PWK 32mm. XS Performance Carburetor 48-9010

O-Ring for Float Bowl Drain Plug

Fits: Flatslide PWK 32mm. XS Performance Carburetors 48-9010

Drain Plug for Float Bowl

Fits: Flatslide PWK 32mm. XS Performance Carburetor 48-9010

Screw Set (Pk/2) to fasten Float Bowl.
Phillips Head 4mm. x M0.7 x 14mm. long

Fits: Flatslide PWK 32mm. xs Performance Carb 48-9010

Jet Block Main Gasket (O-Ring Assy.)

Fits: Flatslide PWK 32mm. XS Performance Carburetor 48-9010

Mounting Screws (Pk./2) for Jet Block mounting.
special 4mm. x M0.7 x 10mm. long with T-20 Torx head.

Fits: Flatslide PWK 32mm. XS Performance Carburetor 48-9010

Main Jet Holder for PWK 32.

Fits: Flatslide PWK 32mm. XS Performance Carburetor 48-9010

Carb Float.

Fits: Flatslide PWK 32 XS Performance Carburetor 48-9010

Pin for Carb Float

Fits; Flatslide PWK 32mm XS Performance Carburetor 48-9010

Gasket for Carb Top (Slide) Cover.

Fits: Flatslide PWK 32mm. XS Performance Carburetor 48-9010

Screws (Pk/2) for carb Top (Slide) Cover.

Fits: Flatslide PWK 32mm XS Performance Carburetor 48-9010

Slide Spring

Fits: Flatslide PWK 32mm. XS Performance Carburetor 48-9010

Plastic cable/spring collar - retains/guides throttle spring and cable at carb.
slide.


Fits: Flatslide PWK 32mm. XS Performance Carburetor 48-9010

Throttle Cable (Black) Fits: 1976-84 Stock Throttle to Mikuni VM 34/36/38mm.
Non CV aftermarket carbs. 2-1 type design, machined steel junction box.
- Quality made in Japan.

Also fits XS Performance Keihin PWK 32 Carb Kit (XS Part # 48-9010)

Replacement 2-1 Throttle cable for XS650 PWK 32mm. XS Performance Carb
Set for XS650

Made In Japan

Carb Holder Spacers (Set/2) Carburetor 70-77.

For Dellorto and PWK carburetors.

Gasket (Pk./2.) - Intake Spigot (Carb Holder Rubber) - Fits: 1970-84 650's OEM Ref.# 256-13556-01 Fits: Between XS650 Manifolds (Carb Spacers) and cylinder head and between the XS manifolds and the carb holders for the PWK 32. Fits: Keihin Flatslide PWK 32mm. XS Performance Carb Set for XS650. Note: 2 sets required.

OEM Reference #
• 256-13556-01

Carb Holder Set(2) for XS Performance PWK Flatslide Carb Kit.


Fits: Flatslide PWK 32mm. XS Performance Carburetor Set for XS650 48-9010

Note: Made with Ethanol resistant material.

Blind Plug - Carb Holder Air Barb - OEM Ref.# 1J7-13569-00. Also called carburetor rubber passage plug. Fits: 1978-84 XS650 stock carb holders & blocks off air barbs when vacuum petcocks are replaced with manual type petcocks. Order quantity needed. Fits: All Mikes XS Carb Holders and Carb Holders for Keihin Flatslide PWK 32mm XS Performance Carb Set for XS650. Note: Each carb holder requires 1 Blind Plug.

OEM Reference #
• 1J7-13569-00

54mm. XS performance motorcycle Pod Air Filter - Tapered Oval style with Chrome end cap.
Pod is an improved replica (Dyno & flow bench developed) of the most popular
brand on the market. Features molded in internal stack, no step rubber mount
flange and Chrome end cap. Filter is supplied dry but washable filtration
material may be oiled for improved dust filtration . Filter body is 71mm.
(2.8") deep x 74mm. (2.91") wide x 101mm. (4") high (at base).

Fits: 1980-84 stock Mikuni BS34 CV Carbs + some Mikuni TM aftermarket carbs.
Fits: Flatslide PWK 32mm. XS Performance Carb Set for XS650
Note: Each kit requires 2 filters.
Compatible with XS400

Black Rubber Fuel or Vent Line - ( original thin wall type ) 3/16" (4.5mm.) ID x
11.5"

Fits: Keihin Flatslide PWK 32mm. XS Performance Carbs for XS650.

Note: Each Carb requires 1 pc. to go to each fuel feed (Petcock).