Mikes XS

Chrome Plated Screw M5 x .8 x 2 10 10/pak

Chrome Allen Socket Screw Intake manifold screws 24 x 5mm

Stainless steel socket head screws for carb holders Set of 4 for stock carb holders as used on 1970-84 650's

OEM Reference #
• 91317-06020-00

This product is temporarily out of stock.

Advance/Breaker Housing Screw & washer Set (6pc.Set) - 3 countersunk flat- head type screws and 3 matching starlock washers. 2 sets required to do both engine housings on each engine. Fits: All 650's 1970-84

OEM Reference #
• 98980-06020-00

Chrome Point Cover Screw

OEM Reference #
• 98980-06020-00
• 98980-06020-00

Lower Engine Case Screw Set. - 18pc. - Fits: Lower right hand & left hand
engine cases on all 650's.

Screw Set (Pk/2) to fasten Float Bowl.
Phillips Head 4mm. x M0.7 x 14mm. long

Fits: Flatslide PWK 32mm. xs Performance Carb 48-9010

Screws (Pk/2) for carb Top (Slide) Cover.

Fits: Flatslide PWK 32mm XS Performance Carburetor 48-9010

Throttle Butterfly Shaft Screws (Pk./4) Fits: Stock Mikuni BS34/BS38 CV Carbs. All OEM XS1/XS2/XS650/TX650 carbs XS400

OEM Reference #
• 256-14922-01-00

This product is temporarily out of stock.

Fuel Idle Mixture Screw with O-Ring - Fits: XS650E/SE/F/SF/2F(1978-79) Stock
Mikuni BS38 CV Carbs.

Beware!
Carb idle mixture screw O-Rings included may or may not fit correctly in your
Mikuni BS38 CV stock carburetor. The O-Ring in the carb as originally supplied by
Mikuni/Yamaha varies in fit and size and we have found it impossible to match
or guarantee a proper fit. No alternatives can or will be supplied. The mixture
screw and matching O-ring was never sold or supplied by Yamaha or Mikuni.

Fuel Idle Mixture Screw - (584 type) - Fits: XS650C/D (1976-77) Stock Mikuni
BS38 CV Carburetors.

Float Bowl Screws - 4mm. - ( Pk./4 Screws with lockwashers). Fits: Early Mikuni CV carb float bowls.

OEM Reference #
• 98517-04012-00

Screws - 5mm.(no lock washers) Late Mikuni CV carb Lid Screw - Pk./4

OEM Reference #
• 98580-05012-00

Screws - 5mm.- Early Mikuni BS38 CV carb Lid Screws with lockwashers and Late 34mm CV Bowl Screw Pk./4

OEM Reference #
• 98507-05014-00

Stainless Steel carb link bar Screws - Set of 4 with socket (Allen) heads.

Link bar screws hold carbs together (on the carb support brackets) and often
need replacing when changing the fuel line T on stock 80-84 BS34 CV carbs.

Float Bowl Drain Screw with O-Ring - Fits: 80-84 Stock 34mm. Mikuni CV Carbs.

OEM Reference #
• 1A8-14991-00-00
• 93210-04230-00

Clutch Push Screw & Housing Assembly Kit - Kit contains: Push Screw Housing with mount screws, Push Screw with Adjuster and locknut, Return spring and anchor pin, Cable Hook with hinge pin. - Sold as a Kit Only . Push screw has Long type actuator arm that gives maximum leverage and provides lightest clutch lever pull. Fits: 1972-84 650's.

OEM Reference #
• 447-16340-00
• 90113-08021-00
• 256-16343-01
• 90179-08179-00
• 256-16396-01-0
• 95803-05012-00
• 214-16389-00-0
• 90506-10023-00
• 90240-06005-00
• 214-16379-00
• 132-16346-00-0
• 91401-10010

Clutch Spring Screw - Sold Each. - 6 Pieces used per engine. Order what you
need. Fits: All 1970-84 XS/TX650's.

Clutch Spring Screw Set - 12pc. - 6 socket head bolts with matching sleeves.
Fits: 1970-84 Clutch hub.

Chrome Switch housing Screws (Pk./2)
for Clutch side handlebar switch.
Holds switch halves together. Fits: 1972-84 650's

NOTE:
These are replacement screws normally
included with switch #24-2062 & #24-2063

Chrome Switch housing Screws (Pk./2)
for Brake (throttle) side handlebar switch.
Holds switch halves together. Fits: 1972-84 650's

NOTE:
These are replacement screws normally
included with switch #24-2062 & #24-2063

Black Switch housing Screws (Pk./2) for Brake (throttle) side handlebar switch. Holds switch halves together. Fits: 1972-84 650's NOTE: These are replacement screws normally included with switch #24-2059 & #24-2060

OEM Reference #
• 98517-05030-00

Black Switch housing Screws (Pk./2) for Clutch side handlebar switch. Holds switch halves together. Fits: 1972-84 650's NOTE: These are replacement screws normally included with switch #24-2058

OEM Reference #
• 98517-05030-00

Alternator Housing Mount Screws - Special 6mm. (pk/2) Fits: All 650's. Screws to mount alternator stator housing to engine.

OEM Reference #
• 92501-06075

Lens Screws (Pk./2) - For 11-2186 signal lamps. 3x18mm

OEM Reference #
• 98580-04055-00

8mm. x 55mm. long Signal Lamp Stud

Lens Screws - (Pk./3) Fits: Round type XS tail lights.

Lens Screws - (Pk./2) Fits: Short Rectangular Type XS tail lights.

Lens Screws (Pk./2) - Fits: Long Rectangular Type XS tail lights.