Harness - Main - Minimal - Custom - 5 ft - 18 Gauge and 14 Gauge
- Color/Finish: Black
- Material: 14 Gauge Wiring / 18 Gauge Wiring
- Fits: Universal (With Some Wiring Modifications)
- Dimensions:
- Length: 5 in. (with 2 ft. of 10 in. Braided Nylon Wrapping)
- Notes:
- Additional Wiring For Points / Electronic Ignitions / Thick Ground Strap Wire / Thick Starter Motor / Solenoid is NOT included.
- Caution: Care Should Be Taken If You Plan To Disconnect Your Controls and Components.
The universal harness will differ from your stock motorcycle wiring harness in all the right ways. Your machine is now a leaner and meaner motorcycle than it was when it left the factory!
First - a single inline fuse will have to be replaced your motorcycle's fuse box in order to reduce the total number of wiring runs and to present you with a clean and slim wiring harness.
Second - 18 gauge wire will have replaced many of the original 16 gauge wiring runs to further slim the harness. High current connections (such as the headlight) can be plugged into the thicker 14 gauge wires that are provided. Please make use of needle nose pliers to grip the metal connectors - rather than pulling on the wires. Damage to the harness may result if improper care is taken.
If you plan on retaining the use of their stock ignition switches - you will also notice that the “Parking” position on your ignition switch is no longer used. Your ignition switch now serves as an on/off switch only.
Finally - those customers with bikes that have certain "safety" features such as flasher cancelers / clutch lever sensors (for starter motors) / reserve lighting relays / and other extraneous things; they're all gone. Your machine is now a leaner and meaner motorcycle than it was when it left the factory.
Download the Universal Wiring Harness Installation Instructions
Is Japanese Universal Part: Yes
Is European Universal Part: Yes
Is American Universal Part: Yes
OEM Number(s): N/A
Motorcycle Fitment: N/A