Free U.S Shipping over $100
or over $300 for international orders
exclusions apply*
Over 15 years in business
serving the yamaha community
Free Shipping / Easy Returns
within the contiguous U.S over $100
exclusions apply*
Largest supplier of xs parts
over 2000 parts in stock / ready to ship

Yamaha XS650 Electrical Parts

Electrical

Once you’ve got the engine and the chassis all sorted, the real fun on an XS650 restoration begins. The electrical system will have to be checked and inspected, and vintage stock XS650 electrical components can be tough to source. Mikes XS carries a full line of these hard-to-find vintage Yamaha electronics. We have XS650 condensors, contact points, ignition coils and NGK spark plugs to get your ignition system squared away. We also have XS650 starter components like MotoGadget M-button and starter brushes, as well as permanent magnet alternator kits and starter block off kits for those wishing to go kick start only on an XS650.

If you’re sticking with the starter, Mikes XS carries XS 650 batteries and lithium ion batteries, as well as fuses, fuse boxes, battery cables and more. The next step on your XS650 restoration should be to inspect the lights, turn signals and horn. We carry a variety of XS650 signal lamps and reflectors, Lucas-style headlights, Bates-style headlights, Tommaselli-type dog-ear headlights and GB café headlights, as well as cat-eye tail light assemblies, LED tail light bulbs and other lighting options.

Finally, before you kick it over, go through the wiring harness. If you detect an issue, look to Mikes XS for your XS650 complete wiring harness. We also sell XS650 6-pole connector kits, wiring connector sets, metric terminals and fuse boxes. No matter the electrical issue, if it’s on an XS650, Mike XS has a solution. 

View as List Grid

Items 1-48 of 303

Page
per page
Set Descending Direction
  1. Pamco Electronic Ignition with Integrated E-Advancer & Ignition Coil Kit - XS650
    Part #
    14-0907B
    Pamco Electronic Ignition with Integrated E-Advancer and Ignition Coil.Kit Includes: Complete Ignition with E-Advancer assembly, Dual Output Points type Ignition Coil (#17-6822) and Two 5K NGK Spark Plug Caps (#23-3113) and 1 set of Point Plate Screws(2) & washers(2)(#14-0655), Advance Rod assembly (#14-0650) plus... 
  2. Fuse Box - XS650 - RD400 - XS750 - XS1100
    Part #
    10-2006
    XS650 Fuse Boxes located on top of the battery are a part of the original wiring harness and have not been available separate, we now offer a copy of this box as shown plus matching terminal block & terminals + the battery top cover it attaches to. Cut the old fuse box from your main harness, attach the connector b... 
  3. Ignition Point - XS1 - XS650 - TX750
    Part #
    14-0038
    Contact Point - (Order 2 for each XS engine) Fits:Yamaha XS/TX 650's Also fits: XS1/B 70-71, TX750 73-74Japanese made Superior Quality - Hitachi type OEM Ref.# 256-81621-11 
  4. Advance Assembly w/Retaining Nut - XS650
    Part #
    14-0652
    Auto Advance assembly mechanism. Complete advance as shown including cogged mounting Nut. Fits: All XS650's 1970-84 (contact point ignition assemblies).Replaces original units with worn or damaged parts. 
  5. Electronic Ignition - Electronic - XS650
    Part #
    14-0900
    Standard Ignition by Pamco, a proven reliable electronic trigger system that replaces the stock XS650 breaker point type ignition. Works with original advance assembly parts and is an easy set & forget install. Fits: All 1970-84 XS650's Basic unit only - Requires a dual output coil (2.2-3 OHM primary) plus stock pa... 
    • Out of stock
  6. Electronic Ignition - XS650 - Basic Kit
    Part #
    14-0901
    Basic Pamco Standard Ignition Kit by Pamco, a proven reliable electronic trigger system that replaces the stock XS650 breaker point type ignition. Works with original advance assembly parts and is an easy set & forget install. Fits: All 1970-84 XS650's Kit Includes: Basic trigger assembly ( XS#14-0900 ) Dual output... 
  7. Electronic Ignition - XS650 with Advance Assembly
    Part #
    14-0902
    Complete Pamco Standard Ignition Kit + Advance Assembly by Pamco, a proven reliable electronic trigger system that replaces the stock XS650 breaker point type or factory Tci ignition and is an easy set & forget system. This kit is for all 1980-84 North American model 650's that originally came with factory Tci igni... 
  8. Electronic Ignition Rotor & E-Advancer Kit
    Part #
    14-0903
    Simplified Pamco Hall effect Electronic Ignition system sensor works with the Electronic Advancer. Kit includes: Electronic Ignition System plate, 60 degree rotor and Electronic Advancer (#14-0648)You can find the 60 degree rotor separate #14-0703 Installation Instructions 
  9. 277 Degree Rephase Ignition + Advance - Complete
    Part #
    14-0906
    Complete Pamco 277 Degree Rephase Ignition + Advance + Auto Advance Assembly.Kit Contains: 277 Degree Rephase Pamco Electronic Trigger Plate and rotor, 2 Pc. 17-6807 75Kv Single Output Green Monster Ignition Coils, (Warning: Serious High Voltage coil)XS Performance copper core silicone Plug Wires (20" each), 2 pc. 5K N... 
  10. High Output Electronic Ignition Kit + E-Advancer - Basic
    Part #
    14-0910
    Basic Pamco High Output Electronic Ignition Kit with Electronic Advancer.Fits: All 1970 1970-84 XS650's. Kit Includes: Complete assembly with E-Advancer (#14-0903), Ultimate high output XS performance Ignition Coil (#17-6903),XS Performance Yellow Silicone Copper core Plug Wire set (20" each)(#23-2906), Two 5K NGK spar... 
  11. Electronic Ignition Kit - High Output - Basic - XS650
    Part #
    14-0911
    Basic Pamco High Output Standard Ignition Kit by Pamco.A proven reliable electronic trigger system that replaces the stock XS650 breaker point type ignition. Works with original advance assembly parts and is an easy set & forget install.Fits: All 1970 1970-84 XS650's. Kit Includes: Basic trigger assembly (#14-0900)... 
  12. Electronic Ignition Kit - High Output - Complete - XS650
    Part #
    14-0912
    Complete Pamco High Output Standard Ignition Kit by Pamco. A proven reliable electronic trigger system that replaces the stock XS650 breaker point type or factory Tci ignition and is an easy set & forget system. This kit is for all 1980-84 North American model 650's that originally came with factory Tci ignitions o... 
  13. Electronic Igntion Kit + E-Advancer - High Output - Ultimate - XS650
    Part #
    14-0913
    Ultimate Pamco High Output Electronic Ignition Kit with Electronic AdvancerKit Contains:Complete assembly with E-Advancer (#14-0903), Ultimate high output XS performance Ignition Coil (#17-6903),XS Performance Yellow Silicone Copper core Plug Wire set (20" each)(#23-2906), Two 5K NGK spark Plug Caps (XS#23-3113), 1 set... 
  14. Electronic Ignition Kit- High Output - Ultimate - XS650
    Part #
    14-0914
    Pamco Ultimate High Output - (1973-84 650's)Kit Contains: 2pc. NGK BPR7EIX Iridium Spark Plugs,Pamco Electronic Trigger Plate and rotor, 82Kv Cool run Ignition Coil,Ignition coil mount bolts and standoff's, 5K NGK Spark Plug Caps and XS Performance copper core Silicone Wires (20" each),Ultimate Electronic Ignition Kit... 
  15. Electronic Ignition Kit - Ultimate High Output Ignition Kit + Advance - XS650
    Part #
    14-0915
    Pamco Complete Ultimate High Output + Auto Advance Assembly. (1973-84 XS650's)Kit Contains: 2Pc. NGK BPR7EIX Iridium Spark Plugs, Pamco Electronic Trigger Plate and rotor, 82Kv Cool run Ignition Coil, Ignition coil mount bolts and standoff's , XS Performance copper core Silicone Wires (20" each), 2 pc. NGK Spark Plug C... 
  16. Ignition Coil - 4.0 Ohm - XS650
    Part #
    17-6805
    Ignition Coil - Exact replacement original type coil for all XS650's with contact point ignitions. Replaces original coils that are weak from heat and age and restores spark strength to the ignition system. Hitachi type CM11-50/50B/52A 4 Ohm primary - 2 required per bike. Plug wires not included.OEM Ref.# 254-82310-60-... 
  17. Ignition Coil - 12 Volt - Ultimate High Output
    Part #
    17-6903
    Ultimate High Output Replacement Coil. Replaces stock factory Tci ignition coils.12 Volt. Primary resistance 2.45 OHMs. Secondary resistance 15ak OHMs 6.6mm mounting holes spaced at 102mm mounting holes center to centerWarning: Serious High Voltage Possible Output as high as 82 KvCaution! Do not operate or apply powe... 
  18. Gasket - Crank Case Cover (Clutch) - Right Hand - XS650
    Part #
    18-0864
    Gasket - Right hand crank case Cover (Clutch). - Fits:1970-84 650's OEM Ref.# 256-15451-00 XS1 XS1B XS2 TX650 XS650 
  19. Switchblock - Handlebar - Left Hand - XS650
    Part #
    24-2058
    Bar Switch Assembly - Clutch Side - Black Fits: 1977-84 North American Model XS650's.OEM Ref. # 1T3-83973-00Note: Switch has No choke cable lever mount as used on some 1983-84 models. 
  20. Switchblock - Handlebar - RH - XS650 - 1976-1978
    Part #
    24-2059
    Bar Switch Assembly - Brake/Throttle Side - Black Fits: 1976-78 North American XS650 Models and 1976-84 European models.OEM Ref. # 584-83963-00-00 
  21. Switchblock - Handlebar - RH - XS650
    Part #
    24-2060
    Bar Switch Assembly - Brake/Throttle Side - Black Fits: 1979-84 North American Model XS650's. OEM Ref. # 2L0-83975-00-98 
  22. Regulator/Rectifier - Solid State - XS650 - 1980-1984
    Part #
    24-2087
    Solid State Rectifier/Regulator for 1980-84 XS650. Made in Japan by original supplier. Direct plug in replacement for 1980-84. Not for use on earlier models.Also fits: XJ550 H/J/K Maxim 81-83, XJ550 RH/RJ/RK Seca 81-83, FJ600 L/LC/N/NC 84-85, XJ650 G/H/J/K Maxim 80-83, XH650 LH Midnight Maxim 81, XJ650 LJ/Lk Seca Tur... 
  23. Regulator/Rectifier - XS650 - 1970-1979
    Part #
    24-2089
    Solid State Rectifier Regulator - Replaces Original individual units used on 1970-79 650's. Comes with connector block/terminal kits and instructions to wire in direct to Original wiring harness.Note: This Rectifier/Regulator is sold only for use with stock 1970-79 wire harnesses. If you are purchasing it for use on a... 
  24. XSCharge™ PMA and Basic Output Ignition Kit w/E-Advancer - XS650
    Part #
    24-2605
    XSCharge™ XS650 PMA /Basic Electronic ignition Package Kit contains: One XSCharge™ XS650 PMA unit (200 Watt) #24-2669 and one Basic Electronic Ignition system with Electronic Advancer and Ignition Coil Save money as a kit. Installation Instructions 
  25. XSCharge™ PMA and Ultimate Electronic Ignition Kit w/E-Advancer - XS650
    Part #
    24-2607
    XSCharge™ XS650 PMA and Ultimate Electronic Ignition with E-Advancer Package Kit contains: One XSCharge™ XS650 PMA unit (200 Watt) #24-2669 and one Ultimate System Electronic Ignition with Electronic Advancer and Ignition Coil Kit Save money as a kit. Installation Instructions 
    • Out of stock
  26. Rotor - Alternator - XS650 - 1980-1983
    Part #
    24-2652
    New Alternator Rotor - Not a rewind. 1980-1983 Yamaha XS650 No Core Required. For Yamaha TCI Type ignitions.   
  27. Stator - Alternator - XS650 - 1980-1984
    Part #
    24-2656
    Alternator Stator Assembly for factory Tci Ignition type models.Complete New assembly includes New Stator Housing, Stator assembly with wire harness, New Brushes set (24-2651), Brush holder (24-8084) and Brush holder Guard (24-7084).Fits: XS650 1980-84 North American models.Only your original 80-84 TCi trigger needs to... 
  28. Stator - Alternator - XS650 - 1970-1979
    Part #
    24-2657
    Alternator Stator Assembly for contact points type models.Fits: XS650 1970-79 North American models (1970-84 Euro points models).Complete New assembly includes New Stator Housing, Stator assembly with wire harness, Brush Holder (24-7079), New Brushes set (24-2650) and Brush holder Guard (24-7084).Note: No core required... 
  29. XSCharge™ PMA and Basic High Output Ignition Kit - XS650
    Part #
    24-2670
    XSCharge™ XS650 PMA and Basic High Output Standard Ignition package.  Fits all 1970-84 XS650's. Kit contains one 24-2669 XSCharge™ XS650 PMA unit (200 Watt) and one Basic High Output Standard Ignition kit . XSCharge™ XS650 PMA (Permanent Magnet Alternator Kit) built specially for t... 
  30. XSCharge™ PMA and High Output Ignition Kit - XS650
    Part #
    24-2671
    Complete High Output Standard Ignition/XSCharge™ XS650 PMA Package.  Fits all 1970-84 XS650's. Kit contains one 24-2669 XSCharge™ XS650 PMA unit (200 Watt) and the Complete High Output Standard Ignition unit. XSCharge™ XS650 PMA  (Permanent Magnet Alternator) built specially for th... 
  31. Repair Kit - Starter Gear - XS650 - 1972-1984
    Part #
    24-6522
    Starter Gear Repair Kit - If your starter kicks out when engaged or makes a rattling sound & will not engage, it is usually the gear that engages with the one on the crank has worn its teeth out (problem is actually not in the starter motor but in the drive train system to the crankshaft, like an Auto bendix drive)... 
  32. Rotor Puller - Alternator - M24 x P1 - XS650
    Part #
    35-0040
    Alternator Rotor Puller - Safely pulls rotor without damaging it. Size: M24 x P1.0Fits: All 650's. 
  33. Capacitor Kit - PMA Charging System - XS650
    Part #
    61-1010
    Battery Eliminator Capacitor Kit for XSCharge™ XS650 PMA (Permanent Magnet Alternator).  Use this capacitor in place of your battery when installing our XSCharge™ XS650 PMA kit for Yamaha XS650. This will convert your bike to a battery-less charging system with kick only starting.Dimensions: 2" x 3-5/8... 
  34. XSCharge™ XS650 PMA (Permanent Magnet Alternator)
    Part #
    24-2669
    XSCharge™ XS650 PMA (Permanent Magnet Alternator) Kit with 200 Watt stator built specially for the Yamaha XS650.Replaces your old rotor that has failed or magnet that has weakened over time. Replaces regulator/rectifier with solid state electronics.Specifically built for the XS650. Fits 1970-79 XS650 with OEM poi... 
  35. Bushing - Camshaft - Brass - XS2 - XS650
    Part #
    05-0032
    Camshaft internal metal Bushing for advance rod. 2 Used per camshaft on 1970-79 XS1, XS2, XS650 models (Points Ignitions) and also required if using Boyer ignitions. Fits inside cam in center (one each side)Note: These are usually missing from 1980-84's. 
  36. Retainer Strap - Battery - XS650 - TX650
    Part #
    10-1176
    Battery Retainer Strap - As used on XS/TX 650's (1974-84) 
  37. Terminal - Metric - Round - Male - B1 - Pkg 10
    Part #
    12-0018
    Metric Terminal - Round Male type Pin Connector - Pk./10 Terminal Pin B1, Male used with B2. Bullet connector 
  38. Advancer Spring and Clip Set - XS650
    Part #
    14-0651
    Auto Advance Spring & Clip Set -Is your Ignition going to full advance at low RPM? This is the solution. Replacement Spring & Clip set replaces worn or broken stock parts & restores proper ignition timing advance rate. 
  39. Spark Plug Cap - 14mm - 90 Degree Elbow - LB05FP - NGK
    Part #
    23-3113
    NGK Stock Number 8030, LB05FP Black NGK 5k Ohm Resistor Plug Cap. 90 degree elbow - for 14mm thread spark plugs with terminal stud. Rubber waterproof boot to seal out the elements. Same as LB05F except with a slightly longer rubber boot. Fits HONDA 1968-1973 350 CB350      ... 
  40. Spark Plug Cap - 10mm to 14mm - 90 Degree Elbow - LZFH - NGK - Non-Resistor
    Part #
    23-3114
    NGK Stock Number 8030, LZFH Black NGK Compact Plug Cap. 90 degree elbow - for 10mm, 12mm or 14mm thread spark plugs with terminal stud. Rubber waterproof boot to seal out the elements. A little smaller than the LB05F and LB05FP plug caps.  This cap does not have any resistor to reduce RFI (Radio Frequency Interfe... 
  41. Starter Block - Off Kit
    Part #
    24-6520
    Starter Block-Off Kit - Kit is used to block off starter motor hole when starter is removed and bike is to be started with kick starter only. Fits: 1972-84 650's 
  42. Horn/Starter Button - XS650 - Z1 - KZ650 - KZ750 - KZ900 - KZ1000 - H2 - H1
    Part #
    24-6525
    Horn Button with Spring Equivalent to OEM: 27010-1009 46028-006 46079-003 46031-005 - contains one (1) each of - button, contact and spring  Fits: Yamaha XS/TX650 switches 1974-84. Works as starter button on XS650 1980Fits Kawasaki Z1- KZ900- W2TT 1969- W2SS 1969- W1SS 1969- W1 1967- S3/A 1974-75- S2/A 1972-76-... 
  43. Condensers Pack - XS650
    Part #
    26-5114
    Condenser Pack - Fits: All 650's with point ignitions. One pack used per engine(located under top motor mount) - Japan OEM Quality OEM # 256-81625-10 
  44. Spark Plug - 14mm - BP7ES - NGK
    Part #
    50-6501
    OEM: 1034 10% discount on orders of 10 spark plugs or more 14mm thread. NGK plugs provide a reliable spark. If you need a hotter running plug select BP6ES or a colder running plug select BP8ES plugs.  Standard spark plugs on the following motorcycles: MAKE YEAR ENGINE CLASS MODEL YAMAHA 198... 
  45. Gasket - Crankcase Cover - XS650 - 1972-1984
    Part #
    18-0869
    Gasket - LH Crankcase Cover. - Fits: 1972-84 650's.OEM Ref.# 306-15461-00 TX650 XS650 
  46. NGK 14mm B8ES Spark Plug
    Part #
    TU38-0019
    OEM: 2411 10% discount on orders of 10 spark plugs or more- 14mm thread. NGK plugs provide a reliable spark. If you need a hotter running plug select B7ES or a colder running plug select B9ES plugs.  Standard plugs on the following motorcycles: MAKE YEAR ENGINE CLASS MODEL HONDA 1968-1972 3... 
  47. Seal - Oil - Starter Motor to Crankcase - XS650 - 1972-1984
    Part #
    01-9022
    Engine Oil Seal - Starter motor to Crankcase OEM Seal #93102-34095 Ars SD34-46-10.5 Fits: All 1972-84 650's. 
  48. Headlight Kit - 7 inch - XS650 - XS750 - XS850 - XS1100
    Part #
    09-0051
    7" Halogen Lamp Kit - Lamp unit with 12V 60/55 Bulb (P43T base) and bulb dust boot. Replaces stock headlight sealed beam. Fits into stock retainer of 74-84 XS650 &TX 650 headlamp. XS1/XS1B/XS2/TX650 (1970-73) models must use #10-1156 "W" clip set and clip the lamp unit to the headlamp rim.Can be used with XS400, XS750,... 
View as List Grid

Items 1-48 of 303

Page
per page
Set Descending Direction