Search by Motorcycle
Search by Motorcycle

Yamaha XS650 Charging System: 1970-79 Rotors, Stators, Regulators and Brushes

Charging System: 1970-79 Rotors, Stators, Regulators and Brushes

Mikes XS has everything you need to perform your XS650 charging system restoration. You can ditch the electric start with an XSCharge XS650 permanent magnet alternator (PMA) kit, or you can get the XS650 PMA regulator rectifier as a stand-alone unit. We also stock the OEM-style XS650 solid-state regulator rectifier. We have everything you need to service your early-model XS650 alternator, such as the brush holder (with screws), alternator rotor, rotor puller tool and crankcase cover gasket. And when you’re done, why not finish the job with a shiny new XS650 alternator cover. 

View as List Grid

22 Items

per page
Set Descending Direction
  1. Regulator/Rectifier - XS650 - 1970-1979
    Part #
    24-2089
    Solid State Rectifier Regulator - Replaces Original individual units used on 1970-79 650's. Comes with connector block/terminal kits and instructions to wire in direct to Original wiring harness.Note: This Rectifier/Regulator is sold only for use with stock 1970-79 wire harnesses. If you are purchasing it for use on a... 
  2. XSCharge™ XS650 PMA (Permanent Magnet Alternator)
    Part #
    24-2669
    XSCharge™ XS650 PMA (Permanent Magnet Alternator) Kit with 200 Watt stator built specially for the Yamaha XS650.Replaces your old rotor that has failed or magnet that has weakened over time. Replaces regulator/rectifier with solid state electronics.Specifically built for the XS650. Fits 1970-79 XS650 with OEM poi... 
  3. Rotor Puller - Alternator - M24 x P1 - XS650
    Part #
    35-0040
    Alternator Rotor Puller - Safely pulls rotor without damaging it. Size: M24 x P1.0Fits: All 650's. 
  4. XSCharge™ PMA and Basic High Output Ignition Kit - XS650
    Part #
    24-2670
    XSCharge™ XS650 PMA and Basic High Output Standard Ignition package.  Fits all 1970-84 XS650's. Kit contains one 24-2669 XSCharge™ XS650 PMA unit (200 Watt) and one Basic High Output Standard Ignition kit . XSCharge™ XS650 PMA (Permanent Magnet Alternator Kit) built specially for t... 
  5. Stator - Alternator - XS650 - 1970-1979
    Part #
    24-2657
    Alternator Stator Assembly for contact points type models.Fits: XS650 1970-79 North American models (1970-84 Euro points models).Complete New assembly includes New Stator Housing, Stator assembly with wire harness, Brush Holder (24-7079), New Brushes set (24-2650) and Brush holder Guard (24-7084).Note: No core required... 
  6. Rotor - Alternator - XS650 - 1980-1983
    Part #
    24-2652
    New Alternator Rotor - Not a rewind. 1980-1983 Yamaha XS650 No Core Required. For Yamaha TCI Type ignitions.   
  7. Gasket - Crankcase Cover - XS650 - 1972-1984
    Part #
    18-0869
    Gasket - LH Crankcase Cover. - Fits: 1972-84 650's.OEM Ref.# 306-15461-00 TX650 XS650 
  8. Rectifier/Voltage Regulator Replacement For XSCharge™ XS650 PMA
    Part #
    24-2088
    Voltage Regulator/Rectifier Replacement Regulator/Rectifier for the XSCharge™ XS650 PMA (Permanent Magnet Alternator #24-2669).  Comes with a quick connector pigtail on the battery side for quick disconnect when needed. 
  9. Brush Set - Alternator - XS650 - 1970-1979
    Part #
    24-2650
    Alternator Brush Set - Fits: 1970-79 XS650's, XS1/XS2, TX650. Complete set as shown. Replace brushes if carbon brush is 7mm. (0.276") or less. Note: To install pull brush assembly around to opposite side of metal bracket its soldered to and then insert into holder. 
  10. Rotor Puller - Alternator - XS650
    Part #
    35-0041
    Rotor Puller Tool For Aftermarket XS650 PMA Charging System Kits Size: M27x1.0 LHFits: All XS650Note: Not for use on stock Yamaha rotor 
  11. Alternator Cover - Polished Billet Aluminum - XS650 - 1970-1984
    Part #
    24-2649
    Polished Billet Aluminum Alternator Cover (No Yamaha name) with screws. Fits: 70-84 650's. 
  12. Rectifier - XS650 - 1970-1979
    Part #
    24-2085
    Rectifier- Solid state replacement for original separate factory unit as used on 1970-79 650's. Direct plug in to stock harness.The top part of photo shown is a side view. The bottom part of photo shown is front view. Note: wiring in connector plug must be rearranged as shown. 
  13. Mounting Screws - Alternator - XS650 - Pkg 2
    Part #
    24-1197
    Alternator Housing Mount Screws - Special 6mm. (pk/2) Screws to mount alternator stator housing to engine.Fits: All 650's. 
  14. Wire Connector Set w/Terminals - 6 Space
    Part #
    12-0635
    Wiring Connector Set with Terminals - 6 space (Large Flat Spade type). This coupler set connects the 1970-84 650 alternator to the stock wiring harness. 
  15. Brush Holder & Mount Screws - Alternator - XS650 - 1970-1979
    Part #
    24-7079
    Alternator brush Holder & mount Screws Fits: 1970-79 XS/TX650. We recommend this be replaced if yours is cracked, broken or oil or grease impregnated. 
  16. XSCharge™ XS650 PMA - Alternator Rotor
    Part #
    24-2668
    Alternator Rotor for the XSCharge™ XS650 PMA (Permanent Magnet Alternator #24-2669). It is a perfect fit on the crankshaft of a XS650. The magnets are the strongest on the market giving it a consistent current for our system. The magnets are sealed inside the rotor instead of glued like some others.It i... 
  17. Instrument Gauge - LED Charging System - XS650
    Part #
    24-2660
    LED Charging system indicator Gauge. Shows Voltage of your alternator rising and falling with RPM and gives a clear indication of your charging systems normal operation and early warning of problems.Gauge is Bright High Quality Chrome plated and clamps onto 7/8" Bars and can be easily wired into any point in the system... 
  18. Alternator Cover - Polished Billet Aluminum - XS650 - XS Performance
    Part #
    24-2653
    Polished Billet Aluminum Alternator Cover with XS Performance Logo CNC cut into cover face/Fits: 70-84 650's 
  19. Nut and Washer Set - Rotor - Alternator - XS650
    Part #
    24-2647
    Alternator Rotor 12mm. Nut & Washer Set 
  20. Alternator Cover - Waved - Alloy - XS650
    Part #
    24-2646
    XS650 Waved Alternator Cover - Alloy 
    • Out of stock
  21. Gasket - Crankcase Cover - Left Hand - XS1 - 1970-1971
    Part #
    18-0674
    Gasket - LH Crankcase Cover. - Fits: 1970-71 XS1/XS1b Only. OEM Ref.# 256-15451-00 
  22. Brush Holder Guard & Mount Screws - Alternator - XS650 - 1980-1984
    Part #
    24-7084
    Brush holder Guard with mount Screws(2) Fits: All 650's 1970-84 
View as List Grid

22 Items

per page
Set Descending Direction