Over 15 years in business
serving the yamaha community
Free Shipping / Easy Returns
within the contiguous U.S over $100
Largest supplier of xs parts
over 2000 parts in stock / ready to ship

Yamaha XS650 Charging System: 1980-84 650 Rotors, Stators, Regulators and Brushes

Charging System: 1980-84 650 Rotors, Stators, Regulators and Brushes

Forget sifting through junk yards, treat your 1980-84 Yamaha XS650 restoration to a brand new regular/rectifier and permanent magnet alternator (PMA) from XSCharge. We also have the rare XS650 solid state regulator/rectifier from the original Japanese OEM supplier, as well as alternator stators and billet aluminum alternator covers, neutral switch caps and wiring connector sets to help you do your XS650 charging system repair the right way. 

View as List Grid

26 Items

per page
Set Descending Direction
  1. Solid State Rectifier/Regulator
    Part #
    24-2087
    Solid State Rectifier/Regulator for 1980-84 XS650. Made in Japan by original supplier. Direct plug in replacement for 1980-84. Not for use on earlier models.Also fits: XJ550 H/J/K Maxim 81-83, XJ550 RH/RJ/RK Seca 81-83, FJ600 L/LC/N/NC 84-85, XJ650 G/H/J/K Maxim 80-83, XH650 LH Midnight Maxim 81, XJ650 LJ/Lk Seca Tur... 
  2. New Alternator Rotor - 1980-1983 Yamaha XS650
    Part #
    24-2652
    New Alternator Rotor - Not a rewind. 1980-1983 Yamaha XS650 No Core Required. For Yamaha TCI Type ignitions.   
  3. Alternator Stator for 80-84 XS650's
    Part #
    24-2656
    Alternator Stator Assembly for factory Tci Ignition type models.Complete New assembly includes New Stator Housing, Stator assembly with wire harness, New Brushes set (24-2651), Brush holder (24-8084) and Brush holder Guard (24-7084).Fits: XS650 1980-84 North American models.Only your original 80-84 TCi trigger needs to... 
  4. Complete High Output Standard Ignition/XSCharge PMA Package
    Part #
    24-2671
    Complete High Output Standard Ignition/XSCharge PMA PackageFits all 1970-84 XS650's. Kit contains one 24-2669 XSCharge PMA unit (200 Watt) and the Complete High Output Standard Ignition unit. XSCharge Permanent Magnet Alternator Kit (PMA) built specially for the Yamaha XS650.Replaces your old rotor that has failed or m... 
  5. Alternator Rotor Puller for Yamaha XS650
    Part #
    35-0040
    Alternator Rotor Puller - Safely pulls rotor without damaging it. Size: M24 x P1.0Fits: All 650's. 
  6. XSCharge Permanent Magnet Alternator Kit (PMA) 200 Watt
    Part #
    24-2669
    XSCharge Permanent Magnet Alternator Kit (PMA) with 200 Watt stator built specially for the Yamaha XS650.Replaces your old rotor that has failed or magnet that has weakened over time. Replaces regulator/rectifier with solid state electronics.Specifically built for the XS650. Fits 1970-79 XS650 with OEM points ignition... 
  7. Gasket - LH Crankcase Cover XS650
    Part #
    18-0869
    Gasket - LH Crankcase Cover. - Fits: 1972-84 650's.OEM Ref.# 306-15461-00 TX650 XS650 
  8. Neutral switch rubber Cap
    Part #
    12-0035
    Neutral switch rubber Cap Fits: All 650's (neutral wire runs from alternator loom). 
  9. XSCharge PMA Rectifier/Voltage Regulator Replacement
    Part #
    24-2088
    Voltage Regulator/Rectifier Replacement Regulator/Rectifier for the XSCharge Permanent Magnet Alternator (PMA #24-2669)Comes with a quick connector pigtail on the battery side for quick disconnect when needed. 
  10. Alternator Brush Set
    Part #
    24-2651
    Alternator Brush Set - Fits: 1980-84 XS650. Complete set as shown. Replace brushes if carbon brush is 7mm. (0.276") or less. Note: To install pull brush assembly around to opposite side of metal bracket its soldered to and then insert into holder. 
  11. Rotor Puller for Yamaha XS650
    Part #
    35-0041
    Rotor Puller Tool For Aftermarket XS650 PMA Charging System Kits Size: M27x1.0 LHFits: All XS650Note: Not for use on stock Yamaha rotor 
  12. Alternator brush Holder & mount Screws
    Part #
    24-8084
    Alternator brush Holder & mount Screws Fits: All 1980-84 650's.We recommend this be replaced if yours is cracked, broken or oil or grease impregnated. 
  13. Alternator Rotor 1970-1979
    Part #
    24-2654
    New Alternator Rotor. Not a rewind. Yamaha XS/TX 650 1970-1979 No core required. Not for Yamaha TCI type ignitions. 
  14. Polished Billet Aluminum Alternator Cover
    Part #
    24-2649
    Polished Billet Aluminum Alternator Cover (No Yamaha name) with screws. Fits: 70-84 650's. 
  15. Alternator Housing Mount Screws
    Part #
    24-1197
    Alternator Housing Mount Screws - Special 6mm. (pk/2) Screws to mount alternator stator housing to engine.Fits: All 650's. 
  16. Wiring Connector Set
    Part #
    12-0635
    Wiring Connector Set with Terminals - 6 space (Large Flat Spade type). This coupler set connects the 1970-84 650 alternator to the stock wiring harness. 
  17. Alternator Rotor for XSCharge PMA
    Part #
    24-2668
    Alternator Rotor for the XSCharge Permanent Magnet Alternator (PMA) #24-2669 It is a perfect fit on the crankshaft of a XS650. The magnets are the strongest on the market giving it a consistent current for our system. The magnets are sealed inside the rotor instead of glued like some others.It is the highest of quality... 
  18. LED Charging System Gauge
    Part #
    24-2660
    LED Charging system indicator Gauge. Shows Voltage of your alternator rising and falling with RPM and gives a clear indication of your charging systems normal operation and early warning of problems.Gauge is Bright High Quality Chrome plated and clamps onto 7/8" Bars and can be easily wired into any point in the system... 
  19. Polished Billet Aluminum Alternator Cover
    Part #
    24-2653
    Polished Billet Aluminum Alternator Cover with XS Performance Logo CNC cut into cover face/Fits: 70-84 650's 
  20. Alternator XS650 Finned Cover
    Part #
    24-2648
    XS650 Polished Finned Alternator Cover 
    • Out of stock
  21. Alternator Rotor Nut
    Part #
    24-2647
    Alternator Rotor 12mm. Nut & Washer Set 
  22. Alternator XS650 Waved Cover
    Part #
    24-2646
    XS650 Waved Alternator Cover - Alloy 
  23. Wiring Connector Set
    Part #
    12-0636
    Wiring Connector Set with Terminals - 8 space (Large Flat Spade type). This coupler set connects the 1980-84 650 Rectifier/Regulator to the stock wiring harness. 
  24. Connector Set
    Part #
    12-0633
    Wiring Connector Set with Terminals - 3 space - Large Flat Spade type. Set for stock factory TCI Ignition trigger wire to stock wire harness (with terminals). 
  25. Brush holder Guard with mount Screws
    Part #
    24-7084
    Brush holder Guard with mount Screws(2) Fits: All 650's 1970-84 
View as List Grid

26 Items

per page
Set Descending Direction